Hatco TPT-240 Pop-Up Toasters User Manual
- June 4, 2024
- Hatco
Table of Contents
- Hatco TPT-240 Pop-Up Toasters User Manual
- WARNING
- IMPORTANT OWNER INFORMATION
- Register your unit!
- INTRODUCTION
- FIRE HAZARD:
- BURN HAZARD:
- MODEL DESCRIPTION
- Plug Configurations
- SPECIFICATIONS
- Electrical Rating Chart
- Dimensions
- INSTALLATION
- General
- OPERATION
- MAINTENANCE
- General
- ELECTRIC SHOCK HAZARD:
- TROUBLESHOOTING GUIDE
- Troubleshooting Questions?
- LIMITED WARRANTY
- 1 One (1) Year Parts and Labor PLUS One
- 2 LIMITATION OF REMEDIES AND DAMAGES
- SERVICE INFORMATION
- United States and Canada
- Warranty Problems
Hatco TPT-240 Pop-Up Toasters User Manual
WARNING
Do not operate this equipment unless you have read and understood the contents
of this manual! Failure to follow the instructions contained in this manual
may result in serious injury or death.
This manual contains important safety information concerning the maintenance,
use, and operation of this product. If you’re unable to understand the
contents of this manual, please bring it to the
attention of your supervisor. Keep this manual in a safe location for future
reference.
IMPORTANT OWNER INFORMATION
Record the model number, serial number, voltage, and purchase date of the unit in the spaces below (specification label located on the bottom of the unit). Please have this information available when calling Hatco for service assistance.
Model No.
Serial No.
Voltage _
_Date of Purchase __
Register your unit!
Completing online warranty registration will prevent delay in obtaining warranty coverage. Access the Hatco website at www.hatcocorp.com , select the _Parts & Service _pull-down menu, and click on “Warranty Registration”.
INTRODUCTION
The Hatco Pop-Up Toaster is perfect for self-serve buffet areas, lighter
volume restaurants, diners, and cafes. The unit evenly toasts a variety of
bread products including bagels, texas toast, waffles, and english muffins.
The Pop-Up Toaster makes a great addition to your conveyor toaster for those
non-peak periods when an occasional order of toast is needed.
The Pop-Up Toaster features a durable stainless steel housing, four self-
centering extra-wide slots, individual toasting controls, removable crumb
trays for easy cleaning, and a 6′ (1829 mm) cord with plug.
The Hatco Pop-Up Toaster is a product of extensive research and field testing.
The materials used were selected for maximum durability, attractive
appearance, and optimum performance. Every unit is inspected and tested
thoroughly prior to shipment
This manual provides the installation, safety, and operating instructions for
the Hatco Pop-Up Toaster. Hatco recommends all installation, operating, and
safety instructions appearing in this manual be read prior to installation or
operation of the unit.
Safety information that appears in this manual is identified by the following
signal word panels.
WARNING indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
Read the following important safety information before using this equipment to avoid serious injury or death and to avoid damage to equipment or property.
ELECTRIC SHOCK HAZARD:
- Plug unit into a properly grounded electrical receptacle of correct voltage, size, and plug If plug and receptacle do not match, contact a qualified electrician to determine and install proper voltage and size electrical receptacle.
- Unplug power cord and allow unit to cool before performing maintenance, cleaning, or attempting to clear a
- DO NOT submerge or saturate with water. Unit is not Do not operate if unit has been submerged or saturated with water.
- Unit is not Locate unit indoors where the ambient air temperature is a minimum of 70°F (21°C).
- Do not pull unit by power cord.
- Discontinue use if power cord is frayed or
- Do not attempt to repair or replace a damaged power Cord must be replaced by Hatco, an Authorized Hatco Service Agent, or a person with similar qualifications.
- Do not steam clean or use excessive water on
- This unit is not “jet-proof” Do not use jet-clean spray to clean unit.
- NEVER insert a knife, fork, or similar object into toasting
- Do not pick up toaster by inserting fingers into toaster slots and grasping heating elements.
- Do not clean unit when it is energized or
- Do not allow liquids to spill into
- Unit must be serviced by qualified personnel only. Service by unqualified personnel may lead to electric shock or burn.
FIRE HAZARD:
- Locate unit a minimum of 1″ (25 mm) from combustible walls and If safe distances are not maintained, combustion or discoloration could occur.
- Do not place anything on top of Do not place toaster near or underneath curtains or other combustible materials. Items near or on top of toaster
In case of fire, disconnect toaster from power source immediately. This
allows unit to cool, making it easier and safer to put out the fire.
Make sure all operators have been instructed on the safe and proper use
of the unit.
This unit is not intended for use by children or persons with reduced
physical, sensory, or mental capabilities. Ensure proper supervision of
children and keep them away from unit.
This unit has no “user-serviceable” parts. If service is required on this
unit, contact an Authorized Hatco Service Agent or contact the Hatco Service
Department at800-558-0607 or
414-671-6350.
BURN HAZARD:
- Some exterior surfaces on unit will get Use caution when touching these areas.
- Do not remove crumb trays for cleaning until toaster is
Locate unit at proper counter height in an area that is convenient for use.
Location should be level to prevent unit or its contents from falling
accidentally and strong enough to support weight of unit and contents.
Always operate toaster with crumb trays installed.
Toasting of coated or buttered products such as garlic bread, cheese
sandwiches, and sweet rolls is NOT recommended. Residue will reduce toaster
performance and could ignite inside toaster. Using toaster with food products
listed above will void unit warranty.
Do not lay unit on the side with the
control panel or damage to the unit could occur.
Use non-abrasive cleaners and cloths only. Abrasive cleaners and cloths
could scratch finish of unit, marring its appearance and making it susceptible
to soil accumulation.
This unit is intended for commercial use only — NOT for household use.
could catch fire causing injury and/or damage to the toaster.
EXPLOSION HAZARD: Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. Clean unit daily to avoid malfunctions and maintain sanitary operation
MODEL DESCRIPTION
All Models
Hatco Pop-Up Toasters are perfect for buffet areas and lighter volume restaurants. The TPT series toasters have four self- centering, extra wide slots with individual progressive toasting controls. Models TPT-208 and TPT-240 are equipped with bagel/bun buttons for one-sided toasting. The durable stainless steel housing contains removable crumb trays for easy cleaning.
Plug Configurations
Units are supplied from the factory with an electrical cord and plug installed. Plugs are supplied according to the application.
ELECTRIC SHOCK HAZARD: Plug unit into a properly grounded electrical receptacle of correct voltage, size, and plug configuration. If plug and receptacle do not match, contact a qualified electrician to determine and install proper voltage and size electrical receptacle.
NOTE: Specification label located on the bottom of the unit. See label for serial number and verification of unit electrical information.
SPECIFICATIONS
Electrical Rating Chart
Model| Voltage| Watts| Amps| Plug Configuration|
Shipping Weight
---|---|---|---|---|---
TPT-120 (US)| ****
120
| 1800| 15.0| ****
NEMA 5-15P
| ****
15 lbs. (7 kg)
TPT-120 (CAN)| 1440| 12.0
TPT-208| 208| ****
2600
| 12.5| NEMA 6-15P *****
TPT-240| 240| 10.8| NEMA 6-15P
Dimensions
INSTALLATION
General
The Pop-Up Toaster is shipped with all components pre- assembled. Care should be taken when unpacking the shipping carton to avoid damage to the unit and the components enclosed.
ELECTRIC SHOCK HAZARD: Unit is not weatherproof. Locate unit indoors where ambient air temperature is a minimum of 70°F (21°C).
EXPLOSION HAZARD: Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
FIRE HAZARD:
- Locate unit a minimum of 1″ (25 mm) from combustible walls and If safe distances are not maintained, combustion or discoloration could occur.
- Do not place anything on top of Do not place toaster near or underneath curtains or other combustible materials. Items near or on top of toaster could catch fire causing injury and/or damage to toaster.
NOTE: TPT Series toasters require a dedicated circuit.
- Remove the unit from the
NOTE: To prevent delay in obtaining warranty coverage, complete online warranty registration. See the IMPORTANT OWNER INFORMATION section for
details.
- Remove tape and protective packaging from all surfaces of the unit.
- Place the unit in the desired
- Locate the unit in an area where the ambient air temperature is constant and a minimum of 70°F (21°C). Avoid areas that may be subject to active air movements or currents (i.e., near exhaust fans/hoods, air conditioning ducts, and exterior doors).
- Make sure the unit is at the proper counter height in an area convenient for use.
- Make sure the countertop is level and strong enough to support the weight of the unit and food
Make sure all the feet on the bottom of the unit are positioned securely on the countertop.
General
The Pop-Up Toaster is designed for ease of operation. Perform the following procedure to operate the toaster.
Read all safety messages in the IMPORTANT SAFETY INFORMATION section before operating this equipment.
- Plug the unit into a properly grounded electrical receptacle of the correct voltage, size, and plug configuration. See the SPECIFICATIONS section for details.
- Set the COLOR CONTROL knob(s) to the desired toast darkness setting. The “1” setting on the COLOR CONTROL knobs represents the lightest toast setting and the “7” setting represents the
- For TPT-208 and TPT-240 toasters, make sure the TOAST/BAGEL button(s) is in the correct position. Push the TOAST/BAGEL button(s) to change its setting, if
- When the TOAST/BAGEL button(s) is in the TOAST position (depressed), both heating elements in each toasting slot will energize to toast both sides of the
- When the TOAST/BAGEL button(s) is in the BAGEL position (released), only the inner heating elements in each pair of toasting slots will energize to toast the inner side of the
- Place bread product in toasting slot(s). If toasting only one side of the product, make sure to place the toasting side toward the center of each pair of toasting slots.
OPERATION
- Push down on the operating lever(s) to lower product into the toaster.
- As soon as the operating lever is pushed down, the heating elements inside the toaster energize and begin
BURN HAZARD: Some exterior surfaces on unit will get hot. Use caution when touching these areas.
- When the toasting cycle is complete, the heating elements shut off and the operating lever(s) rises
NOTE: The operating lever(s) can be lifted manually during toasting for product removal.
ELECTRIC SHOCK HAZARD:
- Unplug power cord and allow unit to cool before performing maintenance, cleaning, or attempting to clear a
- NEVER insert a knife, fork, or similar object into toasting
- Remove and empty the crumb trays periodically in between toasting cycles.
Always operate toaster with crumb trays installed.
Toasting of coated or buttered products such as garlic bread, cheese
sandwiches, and sweet rolls is NOT recommended. Residue will reduce toaster
performance and could ignite inside toaster. Using toaster with food products
listed above will void unit warranty.
MAINTENANCE
General
Daily Cleaning
**** The Pop-Up Toaster is designed for maximum durability and performance
with minimum maintenance.
To preserve the finish of the toaster, it is recommended that the metal
surfaces be wiped daily with a non-abrasive, damp cloth.
ELECTRIC SHOCK HAZARD:
- Unplug power cord and allow unit to cool before performing cleaning, adjustments, maintenance, or attempting to clear a
- DO NOT submerge or saturate with water. Unit is not Do not operate if unit has been submerged or saturated with water.
- This unit is not “jet-proof” construction. Do not use jet-clean spray to clean this unit.
- Do not steam clean or use excessive water on
- Do not allow liquids to spill into
- Unit must be serviced by qualified personnel only. Service by unqualified personnel may lead to electric shock or burn.
This unit has no “user-serviceable” parts. If service is required on this unit, contact an Authorized Hatco Service Agent or contact the Hatco Service Department at800-558-0607 or 414-671-6350.
NOTE: Submerging or saturating the unit with water will damage the unit and void the unit warranty.
ELECTRIC SHOCK HAZARD: Do not clean unit when it is energized or hot.
- Unplug the power cord and allow the unit to
- Remove and empty the crumb trays. CAUTION! BURN HAZARD—Do not remove crumb trays for cleaning until toaster is cool.
- Wash the crumb trays with warm water and a mild Rinse with water.
- Allow the crumb trays to air dry or hand dry with a soft cloth before placing back into the
- Wipe the exterior surface of the toaster with a damp
NOTICE : Use non-abrasive cleaners and cloths only.
- Wipe dry with a clean, dry, non-abrasive
TROUBLESHOOTING GUIDE
Unit must be serviced by qualified personnel only. Service by unqualified
personnel may lead to electric shock or burn
ELECTRIC SHOCK HAZARD: Unplug power cord and allow unit to cool before
performing cleaning, adjustments, maintenance, or attempting to clear a jam.
Symptom | Probable Cause | Corrective Action |
---|---|---|
Toast too light. | COLOR CONTROL knob set on a light setting. | Turn COLOR |
CONTROL knob to a darker setting.
Supply voltage to unit is low.| Verify the supply voltage to the toaster
matches the unit specifications.
Toast too dark.| COLOR CONTROL knob set on a dark setting.| Turn COLOR CONTROL
knob to a lighter setting.
Supply voltage to unit is high.| Verify the supply voltage to the toaster
matches the unit specifications.
Unit takes too long to toast.| The first few batches can take longer because
the toaster needs time to heat up when initially turned on.| Push down the
operation lever(s) for a toasting cycle before inserting bread product to
allow the toaster to heat up.
Supply voltage to unit is low.| Verify the supply voltage to the toaster
matches the unit specifications.
Unit toasts on one side only.| TOAST/BAGEL button is in the BAGEL position
(one-sided toasting).
| Push the TOAST/BAGEL button to set it to the TOAST position (two-sided
toasting).
Heating element defective.| Visually check the heating element inside the
toaster with the operation lever engaged. With the lever pushed down, the
heating element should glow red. If the element does not glow, Contact
Authorized Service Agent or Hatco for assistance.
Heating element does not come on at all when the operating lever is pushed
down.| The switch may be broken.| Contact Hatco for assistance.
The operating lever does not latch.| Latch mechanism is broken.| Contact Hatco
for assistance.
Toaster trips the circuit breaker or GFCI.| Circuit breaker is not sized
properly for the toaster.
NOTE: TPT Series toasters require a dedicated circuit.
| Check circuit breaker for proper sizing.
Wiring fault inside toaster.| Contact Hatco for assistance.
Troubleshooting Questions?
If you continue to have problems resolving an issue, please contact the
nearest Authorized Hatco Service Agency or Hatco for assistance. To locate the
nearest Service Agency, log onto the Hatco website at
www.hatcocorp.com and click on Find Service
Agent , or contact the Hatco Parts and Service Team at:
Telephone: 800-558-0607 or
414-671-6350
e-mail:
partsandservice@hatcocorp.com
LIMITED WARRANTY
1 PRODUCT WARRANTY
Hatco warrants the products that it manufactures (the “Products”) to be free
from defects in materials and workmanship, under normal use and service, for a
period of one (1) year from the date of purchase when installed and maintained
in accordance with Hatco’s written instructions or 18 months from the date of
shipment from Hatco. Buyer must establish the Product’s purchase date by
registering the Product with Hatco or by other means satisfactory to Hatco in
its sole discretion.
Hatco warrants the following Product components to be free from defects in
materials and workmanship from the date of purchase (subject to the foregoing
conditions) for the period(s) of time and on the conditions listed below:
1 One (1) Year Parts and Labor PLUS One
(1) Additional Year Parts-Only Warranty:
Conveyor Toaster Elements (metal sheathed) Drawer Warmer Elements (metal
sheathed) Drawer Warmer Drawer Rollers and Slides Strip Heater Elements (metal
sheathed)
Display Warmer Elements (metal sheathed air heating) Holding Cabinet Elements
(metal sheathed air heating)
Heated Well Elements—HW and HWB Series
(metal sheathed)
-
Two (2) Year Parts and Labor Warranty: Induction Ranges
-
One (1) Year Parts and Labor PLUS Four (4) Years Parts-Only Warranty: 3CS and FR Tanks
One (1) Year Parts and Labor PLUS Nine (9) Years Parts-Only Warranty on:
Electric Booster Heater Tanks Gas Booster Heater Tanks -
Ninety (90) Day Parts-Only Warranty: Replacement Parts
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR PATENT OR OTHER INTELLECTUAL PROPERTY RIGHT INFRINGEMENT. Without
limiting the generality of the foregoing, SUCH WARRANTIES DO NOT COVER: Coated incandescent light bulbs, fluorescent lights, heat lamp bulbs, coated halogen light bulbs, halogen heat lamp bulbs, xenon light bulbs, LED light tubes, glass components, and fuses; Product failure in booster tank, fin tube heat exchanger, or other water heating equipment caused by liming, sediment buildup, chemical attack, or freezing; or Product misuse, tampering or misapplication, improper installation, or application of improper voltage.
2 LIMITATION OF REMEDIES AND DAMAGES
Hatco’s liability and Buyer’s exclusive remedy hereunder will be limited solely, at Hatco’s option, to repair or replacement using new or refurbished parts or Product by Hatco or a Hatco- authorized service agency (other than where Buyer is located outside of the United States, Canada, United Kingdom, or Australia, in which case Hatco’s liability and Buyer’s exclusive remedy hereunder will be limited solely to replacement of part under warranty) with respect to any claim made within the applicable warranty period referred to above. Hatco reserves the right to accept or reject any such claim in whole or in part. In the context of this Limited Warranty, “refurbished” means a part or Product that has been returned to its original specifications by Hatco or a Hatco-authorized service agency. Hatco will not accept the return of any Product without prior written approval from Hatco, and all such approved returns shall be made at Buyer’s sole expense. HATCO WILL NOT BE LIABLE, UNDER ANY CIRCUMSTANCES, FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR COSTS OR LOST PROFITS RESULTING FROM THE USE OF OR INABILITY TO USE THE PRODUCTS OR FROM THE PRODUCTS BEING INCORPORATED IN OR BECOMING A COMPONENT OF ANY OTHER PRODUCT OR GOODS.
SERVICE INFORMATION
United States and Canada
The warranty on Hatco TPT Series Toasters is for one (1) year from date of purchase or 18 months from date of shipping from Hatco, whichever occurs first.
Warranty Problems
If you experience a problem with a TPT toaster during the warranty period , contact the Hatco Parts and Service Team at:
Telephone: 1-800-558-0607 or 414-671-6350
When contacting Hatco for warranty service, please supply the following information:
- Model of unit
- Serial number (located on the bottom of the unit)
- Specific problem with the unit
- Date of purchase
- Name of business
- Shipping address
- Contact name and phone number
Non-Warranty Problems
If you experience a non-warranty problem that requires assistance, please
contact the nearest Authorized Hatco Service Agency.
To locate the nearest Service Agency, log onto our website at
www.hatcocorp.com , select the Support
pull-down menu, and click on “Find A Service Agent”; or contact the Hatco
Parts and Service Team by phone/e-mail.
Read More About This Manual & Download PDF:
References
- Commercial Foodservice & Restaurant Equipment | Hatco
- Commercial Foodservice & Restaurant Equipment | Hatco
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>