nordlux 2112001001 Cody Wall Spot Light Instruction Manual
- June 13, 2024
- nordlux
Table of Contents
nordlux 2112001001 Cody Wall Spot Light
Product Information
- Product Name: CODY
- Model Number: 211200
- Bulb not included
Product Usage Instructions
- Ensure that the maximum wattage specified is not exceeded.
- Follow the mounting instructions provided. Do not discard the instructions.
- For users in the European Union, please note that the product should not be disposed of with household waste. It contains materials that could be harmful to human health and the environment if not properly recycled. Please take the product to a designated collection and recycling point for proper disposal.
- For specific usage instructions, please refer to the detailed user manual.
INSTALLATION
SYMBOLE
- IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
- Class I: The lamp is double-insulated and does not need to be connected to the vellow/green earth wire.
- Z-connection: the wire cannot be replaced if damaged, and the lamp must be discarded.
- Do not exceed the maximum wattage.
- The mounting instruction must not be discarded.
Disposal
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
General maintenance
- Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar.
- Never use detergents containing abrasive or solvent.
- Only switch on the lamp once all the water has evaporated.
- Specifically for mouth-blown glass: Mouth-blown glass is formed manually.
- Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary.
- This is to be seen as a natural consequence of the manual process, and is what gives
- Mouth-blown glass its character and organic look.
- Always clean mouth-blown glass cold.
www.nordlux.com
Nordlux A/S – Estre Havegade 34 • DK-9000 Aalborg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>