GUNNER INT-L G1 Intermediate Large Chew Kit Instruction Manual
- June 13, 2024
- GUNNER
Table of Contents
G1™ Intermediate /Large Chew Kit
Instruction Manual
INT-L G1 Intermediate Large Chew Kit
-
To install the Chew Kit on the door remove the screw, and take off the security latch cover. Discard the latch cover.
-
Place grate over windows and align the screw holes. Install the thirteen screws to secure the grate in place
-
Repeat for bottom of door.
-
To install the Chew Kit on the windows remove three cap screws and washers that attach door frame to upper half of the kennel
-
Using a 7/16″ wrench or ratchet, emote the screws and washers fastening the upper and lower halves of the kennel.
-
Place the window grate on the interior of the kennel. Align the grate with the window openings. Mark the mounting holes.
Repeat for other window(s) -
Insert supplied screws into designed points, and install grates by twisting screws with applied manual force.
-
Reassemble the upper and lower halves of the kennel. Finally, reinstall three cap screws and washers in the door frame.
1-844-GUNNERK
info@gunner.com