GUNNER S-M Kennels Chew Kit Instruction Manual
- June 13, 2024
- GUNNER
Table of Contents
GUNNER S-M Kennels Chew Kit
INSTALLATION INSTRUCTIONS
-
To install the Chew Kit on the door place grate over windows and align the screw holes. Install the ten screws to secure the grate in place.
-
Repeat for bottom of door.
-
To install the Chew Kit on the windows use a 3/16″ hex key to remove 3 cap screws.
-
Using a 7/16″ wrench or ratchet, remove the bolts and washers, fastening the upper and lower halves of the kennel.
-
Uninstall the window pane screws to install the Chew Kit from the inside of the kennel.
Line up the existing holes with the original kennel hardware. -
Repeat step 5 and 6 for all five window panes.
-
Reinstall the upper and lower halves of the kennel. Finally, reinstall three cap screws and washers in the door frame.
1-844-GUNNERK • info@gunner.com