GUNNER G1 Small-Medium Chew Kit Instruction Manual
- June 3, 2024
- GUNNER
Table of Contents
G1 Small-Medium Chew Kit
Instruction Manual
|
---|---
To install the Chew Kit on the door place the grate over the windows and align
the screw holes.
Install the ten screws to secure the grate in place.| Repeat for the bottom of
the door.
|
To install the Chew Kit on the windows use a 3/16″ hex key to remove 3 cap
screws.| Using a 7/16″ wrench or ratchet, remove the bolts and washers,
fastening the upper and lower halves of the kennel.
|
Uninstall the window pane screws to install the Chew Kit from the inside of
the kennel.| Line up the existing holes with the original kennel hardware.
Repeat steps 5 and 6 for all five window panes.
Reinstall the upper and lower halves of the kennel. Finally, reinstall three
cap screws and washers in the door frame.
1-844-GUNNERK
info@gunner.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>