Ok Biotech GV-SA03 OK GoodVoice Personal Sound Amplifier Instruction Manual

Ok Biotech GV-SA03 OK GoodVoice Personal Sound Amplifier

Before you begin

1. Thank you for choosing “OK GoodVoice”. Please read the manual before you enjoy the product
2. Please contact with your distributor If you have any questions. Modification of the device is not allowed. Otherwise, you may lose the warranty.
3. Please keep the instruction for use with you.
4. Please keep the device away from the source of electromagnetic or radiation, as these might interfere with the operation of the device.
5. Do not wear the device while showering or participating in water activities.
6. Use a soft, dry cloth to clean the device. It must never be washed or immersed in water or other liquids.
7. Keep the product away from heat to avoid burning or damaging to the product.
8. Avoid violent vibration or crash the product.
9. Adjust the volume from a low level to an acceptable level at the first-time startup.
10. The device, its parts should be kept out of reach of children and anyone who might swallow these items, or otherwise cause injury to themselves.
11. Overcharge the device might cause the deterioration of the battery.
12. Battery life may vary on the frequency of use.

Contents

If any contents are damaged or missing, please contact your distributor immediately

“OK GOOD Voice” Overview

Bluetooth Earphone

The included Bluetooth earphones is exclusively designed for pairing with the controller

Start Using

• Turn on the Controller
  • Press two power buttons to turn on the controller.
• Turn on the Bluetooth earphones
  • Press the power button of Bluetooth earphones for 3 seconds until the blue light flashes to power up.
  • place the control panel on your left side.
• Put on the Bluetooth earphones
  • Place the control panel on your left side.
• The earphones will be automatically paired with the controller
  • Searching: The blue light (of the Bluetooth earphones) flashes twice at each interval.
  • Connected: The blue light flashes once at each interval. The indicator will be the lighting.
• Adjust the Volume
  • Press “+” to volume up
  • Press “-“ to volume down
  • Audio Feedback can occur at any time, please keep the distance from the Controller to the earphones.

Working with Mobile Phone

Connecting with Bluetooth

• Press on the controller for 5 seconds until flashes in the middle of the screen.
• Turn on Bluetooth on your phone.
• Choose “OK GoodVoice” in the Bluetooth setting of your phone.
• When you turn off your “OK Good Voice” or mobile phone, these will no longer be connected. To connect them again, turn on your “OK Good Voice” and mobile phone. Your “OK Good
• Voice” will then automatically reconnect to your mobile phone.
• If Bluetooth is disconnected from your phone, follow the above steps to re-connect.

Answering Phone Calls

iOS

• Answer directly from the device: Press on the controller.
• Answer from your iPhone: Swipe right –> press the speaker –> to choose “OK Good Voice”.

Android

• Swipe your phone to answer it.
• Do not answer the phone from the device directly

Enjoying the audio playing on your phone

Press to listen to music or video playing on your phone. Press the button again to return to normal mode

Use in everyday life

When You are in a Noisy Environment

Press to the noise-reduction mode. It will reduce the ambient noise. Press again, you will return to normal mode.

When You are Watching TV
Put the controller near to TV for better hearing

When You are in a Meeting
Put the controller on the center of conference room table, which makes following and participating in conversations easier.

Daily Life Scenarios
Using the external microphone or placing the controller near the sound source will help you hear better.

Charging the Battery

• Low Battery Red and blue lights flashed in turns
• Charging Red light on (when the device is off) Red light flashes (when the device is on)
• Charging Completed Red light off
• Low Battery displays and flashes on the screen
• Charging The battery icon shows the battery level and flashes
• Charging Completed Battery icon stops flashing
• Your “OK Good Voice” is the combination of two parts, please make sure two parts are recharging separately.
• Prepare a portable charger with you when you are going out to make sure you can recharge your “OK Good Voice” in time.

• Low battery Red light flashes
• Charging Red light on
• Charging completed Red light off

Specification

Controller

• Bluetooth Version: 4.0
• Bluetooth Protocol: A2DP, AVRCP, HFP, HSP
• Operating Range: 10M
• Bluetooth power: CLASS 2
• The bandwidth of Bluetooth: 2.40 － 2.480GHz
• Battery capacity: 1050mAh/3.7V
• Use of Time: more than 8 hours, rechargeable
• Charge of Time: 2~2.5 hours
• Charging voltage/current: 5V/400mA~650mA (Max)
• Maximum decibel: 120dB

Bluetooth Earphone Transmitter

Bluetooth Version: 5.0
Bluetooth Protocol: A2DP, AVRCP, HFP, HSP
Bluetooth power: CLASS 2
The bandwidth of Bluetooth: 2.40 － 2.480GHz
Battery capacity: 280mAh/3.7V
Use of Time: 8 hours, rechargeable

Bluetooth Earphone

Bluetooth Version: 5.0
Bluetooth Protocol: A2DP, AVRCP, HFP, HSP
Bluetooth power: CLASS 2
The bandwidth of Bluetooth: 2.40 － 2.480GHz
Battery capacity: 280mAh/3.7V
Use of Time: 12 hours, rechargeable

Manufacturer

OK, Biotech Co., Ltd.
Address: No. 91, Sec. 2, Gongdao 5th Rd., Hsinchu City 30070, Taiwan (ROC)
Website: www.okbiotech.com
Tel: +886-3-5160258
Made in Taiwan

FCC Warning Statement

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

References

• OK Biotech Taiwan - Blood Glucose Meter Manufacturer, Portable Nebulizer Manufacturer

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>