Ningbo Nanxin Electronic Technology X1 USB Wireless Back and Waist Massager Instructions
- June 6, 2024
- Ningbo Nanxin Electronic Technology
Table of Contents
Ningbo Nanxin Electronic Technology X1 USB Wireless Back and Waist
Massager
Reminder
The product is designed for household use only, excessive use in public is not
covered by warranty
Make sure you read through instruction before use to avoid any unnecessary
damage to the product or user
USB Wireless Back & Waist Massager X1
- The product is not designed for people (including children) lack of experience or knowledge, use this product under supervision
- This product has heating function, use with care for people who are insensitive of heat
- Sitting or stepping is not allowed, max safe load is 20kg
Warning
- Company is responsible for repairing products placed under special condition of corrosion such as outside islands, sulphur zone and seashore
- Repair service uses OEM parts, company is not responsible for any damage if changed without using OEM parts
Emergency Handling
When anything strange happens, please unplug and shut down the power
Safety Instruction Warning
- This is product is not recommended for people under 16
- The product is not designed for people (including children) lack of experience or knowledge, use this product under supervision
- This product is not suitable for diagnosis, medical treatment or any business practices
- Please do not use for goal other than massaging
- Do not use with other massaging devices
- Do not use by two or more people at the same time
- Do not use when you are drunk or feel uncomfortable
- Do not use for bones with protrusion, fasciitis or injured part of body
- Check if power and function buttons works
- Stop using immediately if you feel any discomfort when using
- Use the product at least 1 hour after meal, exercising or showering
- This product has heating function, please do not use for more than 10 minutes in case of inflammation or burn
- This product has heating surface, be careful for people who are insensitive about heat
- Take 15-20 minutes break before next program, we suggest 20- 30 minutes every day
- Please take off your jewelries before using to avoid
- This product contains precision massaging parts, please do not step on or use upside down, company is not responsible for any damage caused above actions
- Do not rinse with water, this will cause electronic components shortage or components failure
- Do not spray anything like oil, gas, coating, pesticide or any other corrosive liquid, it will cause electronic components shortage or damage of product shell
- Please leave the product in safe cool ventilated place when not using, do not place it outdoors or under sunshine with high temperature
- Please leave the product for 1 hour before using when moving from low temperature area to relatively high temperature. This can avoid circuit shortage caused by water due to sudden temperature change
- Please power off the product before moving it
- Please do not drop, collide or place heavy things on top of the product
- Do not let kids play with the plastic packing bag to avoid suffocation
- The product has been double checked before leaving the facility, please do not disassemble or repair the product on your own. Use OEM parts when repairing, company is not responsible for any damage caused using other unauthorized parts (Please contact the company for repair service if needed)
- Please stop using the product when there is damage to cloth cover, and contact customer service, please do not take off or sew up the cloth cover and report to customer service immediately for exchange. (Remark: Cloth cover is consumable item, company will charge based on real time quote)
- Please charge for 4 hours before first use. Please leave the product in ventilated area when not using, charge every two months
- This product is personal hygiene, no exchange is allowed once the package is unsealed, except for defects
Note
Please avoid using or consult a doctor when you have following
- Just recover from sickness, pregnancy,after delivery or surgery
- Patients with acute disease
- Patients with malignancy
- Patients with malignancy
- Patients with paralysis or disorder of perception
- Patients with severe blood circulation problem
- Wound at waist or back
- People with dermatitis or skin issue
- Long term treatment, severe wound near back or waist
- People with osteoporosis, cataclasis, acute pain or big surgery
- People with thrombus, aneurysm,varicosity, heart or blood disease, skin disease, wound or cellulitis
- People with fever
- People use pacemaker or any other implantable medical device
- People with autonomic disorders
- People who are above 70 years old
- People under 16
- People who cannot operate alone
- For other situations and questions, please consult a doctor
Electrical Safety
- Do not damage, twist, alter, pull or any other inappropriate action on power line. Do not put heavy things on top of power line, especially when moving around to avoid fire hazard. If there is any damage to lines, do not change on your own, please call customer service for help.
- Stop using immediately when power line is damaged to avoid power shortage, sparks or electric shock, do not change on your own and contact customer service for help.
- Do not unplug the power when massaging to avoid any injuries.
- Please do not hold plug itself or pull power line when unplugging.
- Please insert the plug in completely, take off pin, dust or any other things to avoid power shortage, electric shock or fire hazard.
- Please do not use this product when there is thunder outside
- Please do not touch with wet hands to avoid electric shock or getting water into the product
- Please use proper power according to instructions, otherwise might cause damage to product, electric shock or fire hazard
- Please unplug and power off after using or sudden power outage
- This is rechargeable product, please do not charge when no one is around, and watch closely for charging status. Do not power on when charging, and please use proper power line and adapter for charging. Do not charge for more than 4 hours, and unplug after charging.
Parts Name
Suitable for
Air Bag/Vibration/Heat/Auto
The product is only suitable for above parts of body
Instructions
Power On/Off
Press this button to power on or off
Air Bag
Press this button to have air bag filled, default is weak mode. Press again
for strong mode. Press one more time to turn off. (Two Modes)
Vibration
Press this button to turn on vibration mode, default is weak mode. Press again
for strong mode. Press one more time to turn off. (Two modes)
Heat
Under airbag mode or vibration mode, press this button to turn on heating
function. Heating cannot be turned on alone for safety concerns, press again
to turn off. The heating Temperature is set to 45℃±5℃
Auto:
Press this button to turn on auto massaging, default is weak mode. Press again
for strong mode. Press one more time to turn off. (Two Modes)
Daily Care
- Unplug when not or finish using
- Do not pull or drag the product with power line
- Use soft cloth to wipe exterior
- Do not let water or liquid into product
Emergency Handling
Symptom | Cause | Solution |
---|
Unable to
power on
| Insufficient Battery| Charge
Sudden stop
| Use for too long, cause high temperature inside| Restart after on for 30
minutes
Use for more than 10 minutes, the default setting is 10
minutes
| ****
Restart
In case anything happens, and you still cannot find solution:
- Power off and stop using immediately
- Contact the dealer
Specification
Model | X1 | Input | DC 5V-2A |
---|---|---|---|
Output | 24W | Net Weight | 1kg |
Dimension | 401mm x 173mm x 58mm | Material | Rubber, Metal, Cloth |
FCC Rules
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>