HIKVISION AX PRO Wireless Control Panel User Guide
- June 6, 2024
- Hikvision
Table of Contents
How to Add Wireless Detector to AX PRO Wireless Control Panel
Title:
| How to Add Wireless Detector to AX PRO
Wireless Control Panel
| Version:| v1.0| Date:| 09/07/2020
---|---|---|---|---|---
Product:
| DS-PWA Series AX PRO Wireless Security Control Panel| Page:|
1 of 2
Preparation
- DS-PWA Series AX PRO Wireless Security Control Panel
- Wireless Detector DS-PDPC12P-EG2-WE
- IE explorer and App Hik-Connect
How to Add Wireless Detector to AX PRO Wireless Control Panel
For AX PRO Panel, You can use the Login AX PRO Hik-Connect interface to add detector (Scan the detector QR code) or enable Enrollment Mode , or login E Browser with Hik-Connect account and password, then enable Enrollment Mode.
Use Hik Connect APP QR Add Function
- Add the AX PRO to Hik-connect at first
- Login AX PRO, select Device and click , scan the QR code and follow the steps.
Use Hik Connect APP Enrollment Function
- Add the AX PRO to Hik-connect at first
- Login AX PRO, select Device and click , select System—System Options—Enrollment Mode, and Enable Enrollment Mode.
- Turn on the power switch of the Detector.
- Check the status of Detector
Use AX Pro Brower Enrollment Function
-
Add the AX PRO to Hik-connect at first
-
Use Brower Login Panel IP, account and password is Hik-Connect account and password.
-
Select System—System Options—Device Enroll Mode, enable Enter the Enrollment Mode
-
Turn on the power switch of Detector.
-
After finish adding，click Exit the Enrollment Mode to exit.
-
Check the Detector Status: Maintenance—Device Status—Zone Status
SEE Far, Go Further
Security
WHOLESALERS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>