ADD OFFROAD AC2302601NA Ford Bronco Dash Mount Installation Guide
- June 13, 2024
- ADD OFFROAD
Table of Contents
ADD OFFROAD AC2302601NA Ford Bronco Dash Mount
Product Information
The Dash Mount is a product designed for the 21+ Ford Bronco. It allows users
to conveniently mount a dual output USB charger on top of the dash for easy
access. The kit includes all the necessary hardware for installation,
including bolts and nuts.
Before starting the installation, it is important to read and understand all
the instructions, warnings, cautions, and notes provided in the installation
guide. Consult the vehicle owner’s manual for proper disconnection of
electrical and lifting of the vehicle if required.
The installation of this kit may require some technical skills and knowledge
of basic mechanical work. If you feel that you are not capable of performing
the install, it is recommended to take the product to a trained professional.
Inspect all contents of the package to ensure that the product is not damaged
and all installation hardware is included. If any parts are missing, provide
the necessary information to the purchase location.
It is important to always wear eye protection when operating power tools
during the installation process.
Product Usage Instructions
Step 1: Locate the accessory hole
Locate the accessory hole located on top of the dash.
Step 2: Install the dual output USB charger
Using the provided #8-32 button head bolt and nylon lock nuts, install the
dual output USB charger. Use a 5/64 allen wrench and an 11/32 wrench to
tighten the bolts.
Step 3: Wire the USB charging port
Wire the USB charging port to the battery following the diagram provided.
It is recommended to seek professional wiring assistance for this step.
Step 4: Install the Flat Head Bolt
Install the 1/4-20 x 3/4 Flat Head Bolt using a 5/32 allen wrench.
Step 5: Final check and maintenance
Stand back and enjoy your new ADD Dash Mount. After driving 100 miles, check and re-tighten all mounting bolts if needed. Periodically thereafter, continue to check and re-tighten the mounting bolts as necessary.
Note: This product is protected by one or more U.S. patents.
For additional support or technical questions, please call 480-671-0820 or email [email protected].
21+/FORD BRONCO
- DASH MOUNT
- AC2302601NA
TOOLS REQUIRED
- (Allen Wrench) 5/64, 5/32 (Wrench) 11/32
- Ratchet
SKILL LEVEL
- Easy/Intermediate
TIME REQUIRED
- 30 minutes
INCLUDED IN KIT
- Flat Head Bolt (1/4-20 x 3/4)
- Nylon Lock Nut (#8-32)
- Button Head Bolt (#8-32 X 3/4)
- Dual Output USB Charger
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
BEFORE YOU INSTALL THIS KIT
Read and understand all instructions, warnings, cautions, & notes contained in
this installation instruction guide. Consult your vehicle owner’s manual for
proper disconnection of electrical and lifting of vehicle if required for
installation of this product.
This install may require some technical skills and knowledge of basic
mechanical work. If you do not feel that you are capable of performing this
install please take this product to a trained professional.
After reading this guide please contact us with any questions or concerns
before installing product.
Customer Service 480-671-0820
Addictive desert designs is not responsible for any bodily injury or harm to
you or your vehicle as a result of an improper install.
Proper installation of this kit required knowledge of the factory recommended
procedures for removal and installation of original equipment components.
We recommend that the factory shop manual and any special tools needed to
service your vehicle be on hand during the installation. Installation of this
kit without proper knowledge of the factory recommended procedures may affect
the performance of these components and the safety of the vehicle.
Inspect all contents of this package to make sure product is not damaged and all installation hardware has been included. If parts are missing from kit, please be prepared to provide the following information:
- Name of purchase location
- Bar Code on side of box
- Date above bar code
- Date inside box cover
- ALWAYS WEAR EYE PROTECTION WHEN OPERATING POWER TOOLS*
DASH MOUNT 21+/FORD BRONCO
STEP 1
Locate the accessory hole located on top of the dash.
STEP 2
Install the dual output USB charger with the provided #8-32 button head bolt
and nylon lock nuts with a (5/64 allen) and a (11/32 wrench).
STEP 3
Wire the USB charging port to the battery as shown in the diagram below.
(Professional wiring is recommended)
STEP 4
Install the 1/4-20 x 3/4 Flat Head Bolt using a (5/32 allen). 
STEP 5
Stand back and enjoy your new ADD Dash Mount.
Check and re-tighten, if needed, all mounting bolts after 100 miles and
periodically thereafter.
This product is protected by one or more U.S. patents www.addictivedesertdesigns.com/patents
- For Additional Support or Technical Questions,
- Please Call 480-671-0820 or
- Email [email protected]