ADD OFFROAD AC2302801NA Ford Bronco Rear MSP Installation Guide

: June 13, 2024
: ADD OFFROAD

Table of Contents

ADD OFFROAD AC2302801NA Ford Bronco Rear MSP
Product Information
Product Usage Instructions
TOOLS REQUIRED
INSTALLATION guide
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ADD OFFROAD AC2302801NA Ford Bronco Rear MSP

Product Information

The product is a rear mount spare tire carrier designed for 21+ Ford Broncos. It is manufactured by Addictive Desert Designs and has the model number AC2302801NA.

Tools Required

Sockets: 7/16
Box end wrenches: 7/16
Allen wrenches: 5/32, 7/32
Torx: T50 Ratchet

Time Required
Approximately 2 hours

Skill Level
Easy/Intermediate

Included in Kit

16 Nylon Lock Nuts (1/4-20)
16 Button Head Bolts (1/4-20 X 3/4)
4 Button Head Bolts (1/4-20 X 1/2)
2 Flat Washers (M8)
2 Button Head Bolts (M8-1.25 x 30mm)
24 Flat Washers (M6)

Product Usage Instructions

Warnings/Cautions Before Starting Installation:

Read and understand all instructions, warnings, cautions, and notes contained in the installation instruction guide.
Consult your vehicle owner’s manual for proper disconnection of electrical and lifting of the vehicle if required for installation of this product.
This install may require some technical skills and knowledge of basic mechanical work. If you do not feel capable, please take this product to a trained professional.
After reading this guide, contact customer service with any questions or concerns before installing the product: 480-671-0820.
Addictive Desert Designs is not responsible for any bodily injury or harm to you or your vehicle as a result of an improper install.
Proper installation of this kit requires knowledge of the factory recommended procedures for removal and installation of original equipment components.
We recommend having the factory shop manual and any special tools needed to service your vehicle on hand during the installation.
Inspect all contents of the package to ensure the product is not damaged and all installation hardware is included.
If parts are missing from the kit, please provide the following information: 1. Name of purchase location 2. Bar Code on side ofbox 3. Date above bar code 4. Date inside box cover
Always wear eye protection when operating power tools.

Step 1
Remove the seatbelt bolt using a T50.
Step 2
Remove hardtop mounting bolts using a T50.Step 3
Install the mount brackets using the provided 1/4 button head bolts, washers, and nylon lock nuts. Use a 5/32 allen wrench and a7/16 wrench.
Step 4
Install the mount brackets using the provided 1/4 button head bolts and washers. Use a 5/32 allen wrench.
Step 5
Install the mount brackets using the provided 1/4 button head bolts, washers, and nylon lock nuts. Use a 5/32 allen wrench and a7/16 wrench.
Step 6
Install the logo and backer plate using the provided 1/4 button head bolts, washers, and nylon lock nuts. Use a 5/32 allen wrenchand a 7/16 wrench.

21+/FORD BRONCO
REAR MSP AC2302801NA

TOOLS REQUIRED

(Sockets) 7/16
(Box end wrenches) 7/16
(Allen wrenches) 5/32, 7/32
(Torx) T50
Ratchet

TIME REQUIRED

– 2 hours

SKILL LEVEL

-Easy/Intermediate

INCLUDED IN KIT

16- Nylon Lock Nuts (1/4-20”)
16- Button Head Bolts (1/4-20 X 3/4)
4- Button Head Bolts (1/4-20 X 1/2)
2- Flat Washers (M8)
2- Button Head Bolts (M8-1.25 x 30mm)
24- Flat Washers (M6)

WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION

BEFORE YOU INSTALL THIS KIT

Read and understand all instructions, warnings, cautions, & notes contained in this installation instruction guide. Consult your vehicle owner’s manual for proper disconnection of electrical and lifting of vehicle if required for installation of this product. This install may require some technical skills and knowledge of basic mechanical work. If you do not feel that you are capable of performing this install please take this product to a trained professional. After reading this guide please contact us with any questions or concerns before installing product. Customer Service 480-671-0820

Addictive desert designs is not responsible for any bodily injury or harm to you or your vehicle as a result of an improper install. Proper installation of this kit required knowledge of the factory recommended procedures for removal and installation of original equipment components.

We recommend that the factory shop manual and any special tools needed to service your vehicle be on hand during the installation. Installation of this kit without proper knowledge of the factory recommended procedures may affect the performance of these components and the safety of the vehicle.

Inspect all contents of this package to make sure product is not damaged and all installation hardware has been included. If parts are missing from kit, please be prepared to provide the following information:

Name of purchase location
Bar Code on side of box
Date above bar code
Date inside box cover

ALWAYS WEAR EYE PROTECTION WHEN OPERATING POWER TOOLS*

INSTALLATION guide

STEP 1
Remove the seatbelt bolt using a T50.
STEP 2
Remove hardtop mounting bolts using a T50.
STEP 3
Install the mount brackets using the provided 1/4” button head bolts, washers, and nylon lock nuts using (5/32 allen wrench) and a (7/16 wrench).
STEP 4
Install the mount brackets using the provided 1/4” button head bolts, washers, using (5/32 allen wrench).
STEP 5
Install the mount brackets using the provided 1/4” button head bolts, washers, and nylon lock nuts using (5/32 allen wrench) and a (7/16 wrench).
STEP 6
Install the logo and backer plate using the provided 1/4” button head bolts, washers, and nylon lock nuts using (5/32 allen wrench) and a (7/16 wrench).
STEP 7
Install panel with the seatbelt bolt first using a T50.
STEP 8
Install the M8 bolt using a (7/32 allen wrench).
STEP 9
Install the hardtop mounting bolts using a T50.
STEP 10
Stand back and enjoy your new ADD Rear MSP’s
- Check and re-tighten, if needed, all mounting bolts after 100 miles and periodically thereafter.