DYNATRON L25-1 All-In-One Liquid Cooler Installation Guide
- June 13, 2024
- DYNATRON
Table of Contents
DYNATRON L25-1 All-In-One Liquid Cooler
Product Information
The L25-1 is an All-In-One Liquid Cooler designed for efficient cooling of computer CPUs. It comes with various components to support both Intel and AMD sockets.
Box Contents
The box contents include:
-
A. L25-1 Liquid Cooler
-
B. Intel Backplate
-
C. Intel Retention Bracket
-
D. AMD Retention Bracket
-
E. AMD Screws
-
F. Intel 775/115X /1200/1356/1366/1700
-
G. Intel 2011/2066
Intel Installation
**STEP 1
** Select the proper Intel Socket from Intel backplate
**STEP 2
** Align the backplate on the back of the motherboard
STEP 3
Peel o 3M backing
**STEP 4
Ax the backplate to the back of the motherboard
**
**STEP 5
** Slide the retention Ring to the cold plate
STEP 6
Position the cold plate over the CPU, Tighten the screws
**STEP 7
* Place or mount the radiator and fan to the chassis L3 model shown here for
reference
**STEP 8
Connect the power connectors to the motherboard’s PUMP and CPU fan header
**
AMD/Intel Installation
STEP 1
****Remove AMD retention from the motherboard
STEP 2
Select proper socket solution
STEP 3
Locate AMD retention bracket on the cold plate
STEP 4
Tighten the screws into the proper holes based on the CPU socket you use
STEP 5
Place or mount the radiator and fan to the chassis
STEP 6
Connect the power connectors to the motherboard’s PUMP and CPU fan header