KIEAHCEY B0C58YDHKG 2.4GHz Remote Control Mosasaurus Dinosaur Swimming Pool High Simulation Toys Instructions
- June 14, 2024
- KIEAHCEY
Table of Contents
Remote Control Products
User Manual
PRODUCT CONTENTS
PRODUCT DETAILS
REMOTE CONTROL FUNCTIONS
BATTERY INSTALLATION
- Module batteries can be removed by rotating the latch.
- Charge the lithium battery in time, you can plug the USB cable into a 5V power source( e.g,PC, phone charger, power bank) with maximum 2A output.
1.Product Details
Notice:
- Do not charge the battery immediately after use. let’s the battery cool for at least 10 minutes.
- The module battery lights up red when charging, and lights out when charging is complete. The charging time is about 200 minutes. depending on the remaining battery power.
- Low battery alarm continuously emits a “di di di” sound.
2.Remote Control Battery
- Open the battery cover.
- Install 2×1.5V AAA batteries(not included) in the correct positive (+) and negative (-) polarities direction.
- Close the battery cover.
Notice: If the remote control will not be used for a long time, please make sure to take out the batteries.
OPERATION
-
Pairing
Insert the battery into the product and the remote control, turn on the switch of the product and the remote control, the remote control emits a “di” sound, indicating successful frequency alignment. -
Forward and Backward
-
Turn Left and Turn Right
-
Auto Demo Mode
Press the auto demo button, and the Product will enter auto show mode, press other button to exit.
SPECIFICATIONS
Materials: ABS
Drive system: 2WD
Frequency: 2.4GHz
Dimension: 370x145x73mm
Weight: 208g
Play Time: about 25 mins
Control Distance: about 30 meters
Battery type for product: Modular Battery(included)
Battery type for remote control: 1.5V AAA batteries(not included)
NOTE
- The motor will rotate only when the product is put into water, not when held in the hand
- Please play on the water.
- Adult supervision recommended at all times.
- Remove ail batteries when not using it for a long period of time.
TROUBLE SHOOTING
PROBLEM | SOLUTION |
---|---|
Motor does not run | 1.Power switch is off please turn on. |
2.Battery exhausted, please charge.
3.Re-frequency.
Suddenly stopped during operation| 1.Check if the battery is electrical.
2.Replace or recharge the battery.
Remote control Power indicator flashing| Replace the battery.
Driving becomes slow| Recharge the battery.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>