ageLOC LumiSpa Essential Facial Cleansing Kit User Guide
- June 10, 2024
- ageLOC
Table of Contents
ageLOC LumiSpa Essential Facial Cleansing Kit
HOW TO PAIR NU SKINVERA® TO AGELOC® LUMISPA® IO?
- Turn on phone Bluetooth and Location (for Android Version 11 & Below)
- Go to Phone Setting -> Apps (look for VERA) -> Location Permission – ALLOWED (for Android Version 11 & Below)
You are Ready to Pair
- Launch VERA -> tap DEVICES – > Let’s Get Started – > Double tap
- ageLOC® LumiSpa® iO power button to turn the device on -> tap CONNECT -> Tap your ageLOC® LumiSpa® iO –XXXX
- Device will initiate pairing -> If pairing succeeds, the success screen will appear
- You may rename your device under Device Settings
NON-SUCCESS PAIRING SCENARIO
- If the device is not found
- Ensure the phone has Bluetooth turned on
- Soft reset your ageLOC® LumiSpa® iO by placing the device on the charger and pressing the power button & holding for 5 seconds until you see a flashing blue light
- Tap Refresh
- If pairing fails, the failure screen will appear
- Soft reset your ageLOC® LumiSpa® iO by placing the device on the charger and pressing the power button & holding for 5 seconds until you see a flashing blue light
- Forget the device from your phone’s Bluetooth settings
- Try to pair again
UPDATE FIRMWARE
- After initially pairing a device, the app will prompt you to update immediately before you can use the device
- While updating, the lights breathe
- After pairing if a firmware update is needed it can be seen in the device details and device settings
- Firmware version is also located in the device settings
Before Updating
- Make sure ageLOC® LumiSpa® iO is connected to the charger
- If you are not on the charger the app will notify and prompt you to do so
- Keep the phone and ageLOC® LumiSpa® iO close
- Don’t close the app during the update
When ageLOC® LumiSpa® iO fails to update, the device will become stuck in a rippling LED pattern and appear unresponsive.
- Open Vera > Devices > Pair New Device > Let’s Get Started > Connect
- Tap on “LumiSpa” (there will be no 4-digit number following LumiSpa)
- Vera will display “Preparing Device” screen; wait for this screen to complete
- Once “Prepping Device” has finished, “Select Your Device” screen will appear
- Your LumiSpa should appear in the device list; tap on your LumiSpa
- Reinitiate pairing; device will already have up to date firmware
HOW TO CREATE & SAVE CUSTOMIZED TREATMENTS
Tap Explore Treatments/Device Treatment -> Create New Treatments
- Name your treatment
- Choose Treatment Head
- Tap Add Attachment To Treatment
- Tap Add treatment areas
- Choose from area drop-down list, give the area a custom name and adjust desired treatment duration
- Tap Save
- Tap Update Preset to save the customized treatment to the ageLOC® LumiSpa® iO
SAVING TREATMENTS TO DEVICE
You can find your saved treatments in Device Treatments
YOU MAY TOGGLE THE SAVED TREATMENTS FROM THE AGELOC® LUMISPA® IO DEVICE WITHOUT THE APPS
- Once you have saved treatments to your device, toggle through custom treatments by double pressing the power button
- Once you have toggled to the desired saved treatment, quick press the power button to start the treatment
HOW TO DELETE A SAVED TREATMENT FROM AGELOC® LUMISPA® IO?
Tap Explore Treatments/Device Treatment
- Select the pencil icon
- Choose the Saved Treatment that you wish to delete
- Tap the Red icon to delete
- Tap Update Preset to ensure the deleted treatment is removed from the ageLOC® LumiSpa® iO
HOW TO COMPLETELY DELETE ALL CREATED TREATMENTS FROM NU SKIN VERA®?
WITHOUT PAIRING TO ANY ageLOC® LUMISPA® iO DEVICE
Tap Explore Treatments
- Choose the Saved Treatment that you wish to delete
- Tap the Red icon to delete
Please note
- One phone can connect to multiple devices
- One device can only connect to One phone at a time
- If you would like to pass your device to another person, kindly conduct Hard Reset
HOW TO
Connect ageLOC® LumiSpa® iO to charger and press power button for 10s to
conduct a Hard Reset (light will change from blue to orange)
- Charge time can vary device to device
- Charge time is at least 10 hours (until lights turn green)
- LEDs light green
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>