Elna 202-080-202 9 Mm Stitch Width Sewing Machines Instructions
- June 13, 2024
- Elna
Table of Contents
Elna 202-080-202 9 Mm Stitch Width Sewing Machines
Product Information
The Rolled Hem Foot (6 mm) is designed for use with 9 mm stitch width sewing machines. It is compatible with models that have a Lockout key for foot replacement or attachment of a binder. For models without the Lockout key, the power switch should be turned off when attaching and detaching the foot and binder. Please refer to your machine’s instruction manual for specific accessory attachment and removal information.
Product Usage Instructions
- Make a double 6 mm (1/4”) fold in the fabric, approximately 8 cm (3”) in length.
- Lower the needle into the fabric at the desired starting point, then lower the rolled hem foot.
- Sew 3 or 4 stitches while gently pulling the needle and bobbin threads.
- Lower the needle into the fabric and raise the foot. Insert the folded portion of the fabric into the curl of the foot.
- Lower the foot and sew while lifting up the edge of the fabric to ensure smooth and even feeding into the curl.
- To reduce bulk, trim about 12 mm (1/2”) from the corners as illustrated.
Note: The machine settings for using the Rolled Hem Foot are as follows:
- Stitch pattern: Straight stitch (center needle position)
- Stitch length: 1 – 2.5
- Fabric type: Light to medium
Please follow these instructions carefully to achieve optimal results when
using the Rolled Hem Foot. For any additional information or troubleshooting,
refer to your machine’s instruction manual or contact Elna International Corp.
Elna International Corp. SA / 18.02.2022
ROLLED HEM FOOT (6 mm) for 9 mm stitch width sewing machines Ref: 202-080-202
Caution
- Make sure to press the Lockout key when replacing the foot or attaching a binder.
- For models without the Lockout key, turn the power switch off when attaching and detaching the foot and binder.
- Please refer to your machine’s instruction manual for accessory attachment and removal information.
Machine Settings
- Stitch pattern: Straight stitch (center needle position)
- Stitch length: 1 – 2.5
- Fabric: Light to medium
- Make a double 6 mm (1/4”) fold approximately 8 cm (3”) in length.
- lower the needle into the fabric where sewing is to begin, then lower the rolled hem foot.
- Sew 3 or 4 stitches while pulling the needle and bobbin threads.
- Lower the needle into the fabric and raise the foot. Insert the folded portion of the fabric into the curl of the foot.
- lower the foot, then sew while lifting up the edge of the fabric to keep it feeding into the curl smoothly and evenly.
- Trim about 12 mm (1/2”) from the corners as illustrated to reduce bulk.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>