MONSTER K3 Gaming Mechanical Keyboard Instruction Manual

MONSTER K3 Gaming Mechanical Keyboard

Product Information

This device is a product that operates within the guidelines set forth by the Federal Communications Commission (FCC) under part 15 of the FCC Rules. It has been designed to minimize harmful interference and comply with FCC radiation exposure limits for use in an uncontrolled environment. The device should be operated with care and installed keeping a minimum distance of 0cm between the radiator and your body.

Product Usage Instructions

1. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. It is important to use the device as it was intended and refrain from making any unauthorized alterations.
2. To comply with FCC regulations, ensure that the device does not cause harmful interference to other electronic devices. Do not use the device in a way that disrupts the functioning of other equipment.
3. The device must accept any interference received, including interference that may cause undesired operation. If you experience interference while using the device, try adjusting the positioning or location to minimize signal disruptions.
4. For safety reasons, it is recommended to install and operate the equipment with a minimum distance of 0cm between the radiator and your body. This will help ensure compliance with FCC radiation exposure limits.
5. Follow all other instructions provided in the user manual for proper setup, maintenance, and usage of the device.

By following these guidelines, you can ensure safe and effective operation of the product while complying with FCC regulations.

Product parameters

• Number of keys ———————– 85 keys
• Connection method ———————– USB/2.4G/BT
• Lighting ———————– RGB
• Light effects ———————– 20 Group
• Interface ———————– Key line separated Type-c Interface
• Operating system support ———————– Mac/Windows
• Shaft ———————– Mechanical shafts (monster shafts)
• Battery capacity ———————– 4000mAh

Packing list

With: 2-in-1 key puller / shaft puller * 1

Product Specifications

• Product Size 347.53139.9244.8‡1mm
• Optional 2.4G, BT and wired connection modes for efficient multitasking advancement.
• Advanced anti-punch function with full key conflict-free support, providing stronger command readings in the heat of battle.
• Streamlined body, retaining functionality while keeping the desktop more concise.

Keyboard bottom switch description

• When the toggle switch is set to 2.4G position, it is 2.4G mode
• When the toggle switch is set to BT, it is Bluetooth mode
• When the toggle switch is set to USB, the keyboard power off, if the cable is plugged into the USB mode
• When the system switch is set to MAC for Apple system, when set to WIN for Microsoft system

Keyboard indicator

Connection Mode

2.4G Mode
Receiver connected to the computer USB, keyboard boot dial to 2.4G position, you can automatically connect back to use. Forced code pairing: After the keyboard is turned on and dialed to the 2.4G position, the white light of the Q key flashes slowly, long press the FN + Q key combination 3S into the pairing mode, the Q key light flashes quickly, insert the receiver, the pairing is successful and exit the code pairing, Q key light back to backlight mode. If you can not find the pairing device after 20s, automatically exit the pairing mode. No pairing code action 7 seconds after the keyboard into sleep mode.

Bluetooth mode

1. When the toggle switch is set to Bluetooth mode, short press the FN+ W/E/R key combination to switch between different devices;
2. Long press FN+W/E/R key combination 3S, the keyboard enters the pair code pairing state, the corresponding key white light flashing, start to connect connected to Bluetooth devices, connected to the device, the corre- sponding key light to restore the backlight mode, if not connected to the device backlight 7 seconds after the light goes off, the keyboard enters sleep mode.

• Displayed after wired connection: Gaming keyboard
• 2.4G connection: 2.4G Wireless Receiver
• BT5.1 connection: AIRMARS K3

Safety instructions

• Keep the equipment dry. Keep away from precipitation, humidity, all types of liquids and condensation.
• Do not use the product with wet hands.
• Do not use or store the equipment in dusty or dirty areas.
• Do not store the equipment in hot or cold conditions (this may damage the equipment).
• Do not drop, knock or shake the device (this may cause breakage when using).

How to operate key compound function

Light mode

Micro power short range radio transmitting equipment catalog and

technical requirements

1. Specific terms: Class F equipment
   • Frequency used: 2400-24835MHZ
   • Transmit power limit: 10mW
   • Frequency tolerance: 75kHz
   • Use scenario: PC mobile device use
   • Antenna type: PCB antenna
   • Performance/Control: Transmission distance about 10 meters (open and unobstructed area
2. Do not change the use scenario or use conditions to expand the transmitting frequency range and increase the transmitting power (including additional RF power amplifier), do not change the transmitting antenna without permission.
3. Shall not produce harmful interference to other legitimate radio stations (stations), and shall not propose protection from harmful interference.
4. Should bear the radiation of radio frequency energy of industrial, scientific and medical (ISM) application equipment interference or other legitimate radio stations (stations) thousand interference.
5. Such as other legitimate radio stations (stations) harmful interference, should immediately stop using, and take measures to eliminate interference before continuing to use.
6. In the aircraft and in accordance with laws and regulations, national regulations, standards set up radio astronomical stations, meteorological radar stations, satellite earth stations (including measurement and control, ranging, receiving, navigation) and other civil and military radio stations (stations), airports and other electromagnetic environmental protection areas, the use of micro-power equipment should comply with the provisions of electromagnetic environmental protection and the relevant industry authorities.
7. Prohibit the use of various types of model remote control within a radius of 5000 meters from the center of the airport runway.
8. Temperature: -10–45 °C, voltage: 3.3v when using micro-power equipment.

This table is compiled according to SJ/T 11364.

• O: Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572
• X: Indicates that this hazardous subatance contained in at least one of the homogeneous materials used for this part is the limit requirement in GB/T 26572.

Environment Friendly Use Period (EFUP)
This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical produsts wil not Leakor mutate so that the use of these [substances] will not result in any severe environmental pollution, any bodily injury or damage to any assets.

Warranty Card

Dear user, this warranty card is your certificate for applying for warranty in the future, please cooperate with the seller to fill it out and keep it in a safe place for future use!

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterferenc e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or reloca te the receiving antenna.
• Increase the separation between the equipm ent and receiver.
• Connect the equipment into an outlet on a circuit different f rom that to which the receiver is c onnected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>