XTRONIC ACT909962476 Alarm Clock with Wireless Charger Instruction Manual

: June 13, 2024
: XTRONIC

Table of Contents

SAFETY INFORMATION
SPECIFICATION
USING THE WIRELESS CHARGER
LED DISPLAY
BUTTON AND FUNCTIONS
SUITABLE FOR
POWER UP OR RESET
OPERATION INSTRUCTIONS
EXPLANATION OF SYMBOLS
WARRANTY
CE DECLARATION OF CONFORMITY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ALARM CLOCK
WITH WIRELESS CHARGER INSTRUCTION MANUAL

SAFETY INFORMATION

The following safety precautions should always be observed to minimize the risk of electric shock, personal injury, or fire. It is important to read all of these instructions carefully before using the product and to keep them for future reference.
WARNING
When using this product, basic precautions should always be followed, including the following:

Do not use on an aircraft or in a hospital.
To reduce the risk of injury, close supervision is necessary when the product is used near children.
Do not expose the device to any moisture.
Do not use the device in excess of its output rating. Overloaded outputs above rating may result in a risk of fire or injury.
Do not use the device if damaged or modified. Damaged or modified device may exhibit unpredictable behavior resulting in fire, explosion or risk of fire or injury.
Do not disassemble the device. Seek assistance from a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury.
Do not expose the device to fire or excessive temperature. Exposure to extreme heat may cause explosion.
Have servicing performed by a qualified repair person using only identical replacement parts to ensure that the safety of the product is maintained.
The device is not a toy.
Do not overcharge Phone. Unit may get hot with excessive use. Remove Phone when it is fully charged. Never charge for more than 7 hours at a time.
Attachments on the back of your phone can impede the effectiveness of the wireless charge, and lead to overheating. Please remove attachments from the phone before charging on this device.

KEEP OUT OF REACH OF CHILDREN.
CHECK IF THE PACKAGING FOR THE FOLLOWING ITEMS: ALARM CLOCK WITH WIRELESS CHARGING PAD, USB CABLE AND MANUAL.

SPECIFICATION

LED time
Light, medium, dark, off four brightness options. The default is light
3 function buttons: SET, UP, DOWN
Date display, showed “Day Month”, the default is 2023 year 1st January, date range is from 2023-2099
4-bit time display, hour, minute
At start up, displays the Time/ Date alternately, when Time display 10 seconds then exchange to Date display 5 seconds; When Time/ Date display alternately, press “UP” for 2 seconds, with buzzer “BI”, then cancel display alternately mode, enter Time display mode.
Clock appears to be 0:00 / Alarm appears to be 6:00
Alarm goes off: two minutes after the alarm goes off, at the same way as a regular alarm.
15W Wireless charging function
External USB function
Frequency: 110kHz-205kHz
Power: 15W
Operating Voltage: 3.0V-4.5V
Static current <30uA (LED non-display)
USB voltage: 12V and power requirements: 18W for input
Power requirements for the fast charging function: For APPLE is 7.5W, for LG/SONY/MI/ OPPO is 15W
Max RF transmitted power 15W

USING THE WIRELESS CHARGER

Make sure that the charging area is in the same position as the receiver of the device to be charged.
Connect the USB part to a power source.
Make sure your phone is compatible for wireless charging.
Place your wireless charging device on the wireless charging area.

NOTE

Some phone cases may block the wireless charging.
Do not place other materials, like metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger pad.
Check your mobile device’s battery percentage using the charging icon displayed on the screen of your phone.
When the mobile device is not placed on the charging area accurately, your mobile device may not charge properly.

LED DISPLAY

BUTTON AND FUNCTIONS

Function/Operating	UP	DOWN	SET
Standard mode	Single press	Light, medium, ark, ff yr dark, off c
cycle selection	Turn off or on the alarm	Switch time, alarm time, and night

SUITABLE FOR

Compatible with all Qi smartphones such as:
– Apple iPhone: 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 13 Pro, 13 Pro Max, iPhone 14 & 14 pro. Samsung Galaxy: S6, S6 Active, S6 Edge, S7, S7 Active, S7 Edge, S8, S8 Active, S8+, S9, S9+, S10, S10e, S10+, S20, S20+,S20 Ultra, S20 FE, S21, S21+, S21 Ultra, S21 FE, S22, S22+, S22 Ultra, S23, Note8, Note9, Note10, Note10+, Note20, W21, W22, Z Fold2, Z Fold3, Z Fold 4, Z Flip3, Z Flip4. Huawei: Mate 20 Pro, Mate 20 RS, Mate 30, Mate 30 Pro, Mate 30 RS, Mate 40 Pro, Mate 40 Pro+, Mate 40 RS, P30 Pro, P40 Pro, P40 Pro+. Sony: Xperia Z3V, Xperia Z4V, Xperia XZ2, Xperia XZ2 Premium, Xperia XZ3, Xperia 5 IV. Google: Pixel 3, Pixel 3 XL, Pixel 4, Pixel 4 XL, Pixel 5, Pixel 6, Pixel 6a, Pixel 6 Pro, Pixel 7, Pixel 7 Pro. Xiaomi: Redmi Note 10, Redmi Note 11 Pro. Asus: Zenfone 9. OnePlus: 10T. (Plus more devices)

TWS Earphones: Apple AirPods 2 and AirPods Pro with wireless charging case. And other brand TWS earphones with Qi wireless charging.
Smartwatch: Apple Watch: Series 1-7. And other brand smartwatches with Qi wireless charging.

POWER UP OR RESET

LED full display 2 seconds, enter to standard mode after Bi tone.

OPERATION INSTRUCTIONS

A. TIME SETTING:

In time display mode, press “SET” for 2 seconds to enter set up mode, in order “12/24H hour- minute”.
When setting, single press “UP”, single step forward; press “UP” for 2 seconds, 8 steps/second forward. Single press “DOWN”, single step backward; press “DOWN” for 2 seconds, 8 steps/ second backward. If do not press the button for 10 seconds, the current setting will be confirmed automatically and return to time mode.
In setting mode, the object you set is displayed blinking.
Mark: When alarm is turned on, the alarm symbol cannot be displayed when setting the clock.

B. DATE SETTING:

In date display mode, press “SET” 2 seconds to enter set up mode, in order “year-month-day”.
When setting, single press “UP”, single step forward; press “UP” for 2 seconds, 8 steps/second forward. Single press “DOWN”, single step backward; press “DOWN” for 2 seconds, 8 steps/ second backward. If do not press the button for 10 seconds, the current setting will be confirmed automatically and return to time mode.
In setting mode, the object you set is displayed blinking.
Mark: When alarm is turned on, the alarm symbol cannot be displayed when setting the clock.

C. ALARM SETTING:

In alarm display mode, press “SET” 2 seconds to enter set up mode, in order “hour-minute-snooze”.
When setting, single press “UP”, single step forward; press “UP” for 2 seconds, 8 steps/second forward. Single press “DOWN”, single step backward; press “DOWN” for 2 seconds, 8 steps/ second backward. If do not press the button for 10 seconds, the current setting will be confirmed automatically and return to time mode.
When entering the alarm time setting, the alarm symbol will be in flashing display. When setting the snooze time, the alarm symbol will not be in flashing display.
In setting mode, the object you set is displayed blinking.

D. ALARM TYPE AND ON/OFF

BUZZER alarm two minutes.
AL: BI BI BI BI —BI BI BI BI—BI BI BI BI —continuing.
Alarm frequency: 2KHZ
When the clock display, single press “DOWN” switch alarm, turn on the alarm, the alarm symbol display.
When the alarm is on, press “SET” to stop the alarm, enter to the snooze MODE, the corresponding alarm symbol flashes, until the set snooze time is ringing again.
You can press “DOWN” or “UP” to turn off the alarm or snooze, alarm symbol stops flashing.

E. SNOOZE SETTING

Default snooze time: 5 minutes;
In alarm setting mode, long press “SET” entering snooze time, “05” flashing display, single press “UP” or “DOWN” to set 5-60 minutes snooze time.
The number of snooze is unlimited.

F. NIGHT MODE SETTING

Night mode setting: LED display automatically into the low-light display.
In the time display mode, short press “SET” twice to show the Night mode on (show ON) and off (show OFF), default “OFF”, time period 18:00~6:00 automatically into the low-light display, press “DOWN” or “UP” to select ON or OFF.
In night mode “ON” display, long press “SET” to enter the interval time setting, setting order: start hour start minute-finish hour-finish minute. Start the hour and minute setting, the top of the COOL two points lights up, finished the hour and minute setting, the bottom of the COOL two points lights up.

G. OTHER FUNCTIONS:

Bright, Dark control: turn on or re-set default brightness, single press “UP” cycle to switch between light, medium, dark, off four brightness options.
If you do not press the button for 10 seconds, the current setting will be confirmed automatically. Return to time mode.
Press “UP” for 2 seconds, can choose or cancel Time/Date display alternately mode.
Suggest to use QC 3.0 Adapter with output 5V/2A or 9V/2A or 12V/1.5A.

EXPLANATION OF SYMBOLS

| This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental safe recycling.
---|---
| Declaration of Conformity. Products marked with this symbol comply with all the applicable Community regulations of the European Economic Area.
****| Read operators manual.
| The packaging can be reused or recycled. Please dispose properly of any packaging material no longer required. If you notice any transport damage during unpacking, please contact your dealer without delay.
| Qi Certification is the WPC’s product certification program for wireless charging devices. The WPC uses a network of independent authorized test labs around the globe that test specific properties for safety, interoperability, and usability, each of which can involve multiple test procedures. Only Qi- Certified products are allowed to carry the Qi logo.

WARRANTY

The manufacturer provides warranty in accordance with the legislation of the customer’s own country of residence, with a minimum of 24 months, starting from the date on which the appliance is sold to the end user.

The warranty only covers defects in material or workmanship.
The repairs under warranty may only be carried out by an authorized service center. When making a claim under the warranty, the original bill of purchase (with purchase date) must be submitted.
The warranty will not apply in cases of:
1. Normal wear and tear
2. Incorrect use, e.g., overloading of the appliance, use of non-approved accessories
3. Use of force, damage caused by external influences
4. Damage caused by non-observance of the user manual, e.g., connection to an unsuitable main supply or non-compliance with the installation instructions
5. Partially or completely dismantled appliances
6. The accessories are not covered by the terms of the warranty because they are subject to wear.
If you need more information or support, please contact us via: www.arovo.com/contact.

In accordance with our policy of continual product improvement, we reserve the right to make technical and optical changes without notice. The current version of this instruction manual can be found under www.arovo.com.

CE DECLARATION OF CONFORMITY

We, declare under our own responsibility that the product:
AROVO B.V.
DOBLIJN 26
1046 BN AMSTERDAM
THE NETHERLANDS
WWW.AROVO.COM
Article number / Article name / Barcode:
XTRONIC ALARM CLOCK WITH WIRELESS CHARGER ACT909962476
BLACK: 8720297459955
SILVER: 8720297459979

a) The object of the declaration described above is in conformity with the relevant Union harmonization legislation:| b) Meets the conditions laid down in the following Harmonised standards:
---|---
RADIO EQUIPMENT DIRECTIVE 2014/53/ EU AND ROHS DIRECTIVE 2011/65/EU, ROHS DIRECTIVE (EU)2015/863.| EN 303 417 V1.1.1, EN 301 489-1 V2.2.3,
EN 301 489-3 V2.2.0, EN 55032:2015+A1:2020,
EN 55035:2017+A11:2020,
EN IEC 61000-3-2:2019+A1:2021,
EN 61000-3-3:2013+A1:2019,
EN IEC 62311:2020, EN 50665: 2017,
EN IEC 62368-1:2020+A11:2020,
EN 62368-1:2014 + A11:2017, EN 62233:2008,
EN 55014-2017, EN 61000-3-2:2014,
EN 61000-3-3:2013, EN 55014-2:2015.
Michael van Dijk – Quality manager
June 19, 2023
Amsterdam – The Netherlands|

The current version of this Declaration of Conformity can be found under www.arovo.com

XTRONIC ALARM CLOCK WITH WIRELESS CHARGER
ACT909962476 / 2023-10068
Made in China
Imported by Arovo B.V.
Doblijn 26, 1046 BN Amsterdam
The Netherlands, www.arovo.com