infineon CY8CKIT-041S-MAX PSoC 4100S Max Pioneer Kit User Guide

Quick start guide

PSoC™ 4100S Max pioneer kit

CY8CKIT-041S-MAX

Kit contents

1. PSoC™ 4100S Max pioneer board
2. Capacitive sensing expansion board
3. USB Type-A to Micro-B cable
4. Six jumper wires (five inches each)
5. 40-pin FFC cable (two inches)
6. Quick start guide (this document)

Before you start

1. Ensure that jumper J10 is in 5V position and that jumper J11 is populated.
2. Connect the board to your PC using the provided USB cable.
3. Observe that the Power LED and KitProg3 status LED turn ON.

Note: This demo does not require driver installation, but driver installation may occur in the background.

PSoC™ 4100S Max pioneer board connected to PC

Test the basic operation

1. Press the XRES switch (SW1) to reset the device.
2. Touch a CAPSENSE™ button. Observe that the corresponding LED turns ON.
3. Remove the finger from the button. Observe that the LED turns OFF.
4. To evaluate additional features of this kit, see the code example, CE231079 -­ PSoC™ 4: MSC CAPSENSE™ CSX button tuning. See the PSoC™ 4100S Max pioneer kit guide for more code examples.

Finger touch on the CAPSENSE™ button

PSoC™ 4100S Max pioneer board details

1. Power LED (D2)
2. KitProg3 USB connector (J8)
3. KitProg3 status LED (D3)
4. PSoC™ 5LP-based KitProg3 programmer and debugger (CY8C5868LTI-LP039, U2)
5. KitProg3 programming mode selection button (SW3)
6. Voltage regulator (U3)
7. Power selection jumper (J10)
8. PSoC™ 4100S Max MCU current measurement header (J11)
9. Reset button (SW1)
10. Arduino UNO R3-compatible power header (J1)
11. PSoC™ 4100S Max MCU 10-pin SWD program and debug header (J12)
12. Arduino UNO R3-compatible I/O headers (J2, J3, J4)
13. User button (SW2)
14. CAPSENSE™ buttons (CSB1, CSB2)
15. User LEDs (D1, D4, D5)
16. 40-pin FFC connector for capacitive sensing expansion board (J9)
17. Thermistor (TH1)
18. PSoC™ 4100S Max MCU (CY8C4149AZI-S598, U1)
19. PSoC™ 4100S Max MCU extended I/O header (J6)*
20. External power supply connector (J5)*

• Not populated; footprint only

PSoC™ 4100S Max pioneer board pinout details

**Note: *** Not connected

LEGEND
Arduino Uno R3 I/Os
PSoC™ 4100S Max I/Os

A
1. NC/NC
2. VTRAG/I0REF
3. XRES/RESET
4. V3_3/V3_3
5. V5_0/5V
6. GND/GND
7. GND/GND
8. VIN/VIN

B
1. P2_0/A0
2. P2_1/A1
3. P2_2/A2
4. P2_3/A3
5. P2_4/A4
6. P2_5/A5
7. P2_6*
8. P2_7

C
1. P1_2
2. P1_3
3. P1_4
4. P1_5
5. P1_6
6. P7_2
7. P7_5
8. P12_1

D
1. P1_0/SCL
2. P1_1/SDA
3. VREF/AREF
4. GND/GND
5. P10_2/D13
6. P10_1/D12
7. P10_0/D11
8. P10_3/D10
9. P10_5/D9
10. P10_4/D8

E
1. P4_2
2. P4_3
3. P5_1
4. P5_2
5. P6_4
6. P12_0
7. P7_3
8. P7_4
9. P0_6
10. P0_7

F
1. P6_3/D7
2. P6_2/D6
3. P6_1/D5
4. P6_0/D4
5. P8_3/D3
6. P8_2/D2
7. P8_1/D1
8. P8_0/D0

For the latest information about this kit, visit www.cypress.com/CY8CKIT- 041S-MAX

Document number: 002-31573 Rev. *B
Date: 06/2021

Downloaded from Arrow.com.

All rights reserved. © 2021 Infineon Technologies AG

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>