elna 202-098-203 L2 Beading And Pearl Foot Instructions
- June 13, 2024
- Elna
Table of Contents
PEARL / BEAD FOOT (max. 2.5 – 4 mm)
for 9 mm stitch width sewing machines
Ref: 202-098-203
202-098-203 L2 Beading And Pearl Foot
Sewing on strung beads or pearls is popular for bridal wear, evening wear, smart/casual wear and crafts. The beading foot is a blessing that makes a tedius task pleasurable.
Caution
Make sure to press the Lockout key when replacing the foot or attaching a
binder.
For models without the Lockout key, turn the power switch off when attaching
and detaching the foot and binder.
Please refer to your machine’s instruction manual for accessory attachment and
removal information.
Machine Settings
Stitch pattern: Zigzag stitch (center needle position)
Needle: #11/75 or blue needle
To sew:
Adjust the stitch width and length to suit bead size.
Place a string of breads or pearls under the groove on the bottom of the foot.
Sew over the breads or pearls while guiding the fabric.
Elna International Corp. SA / 21.02.2022
Documents / Resources
| elna
202-098-203 L2 Beading And Pearl
Foot
[pdf] Instructions
202-098-203 L2 Beading And Pearl Foot, 202-098-203, L2 Beading And Pearl Foot,
And Pearl Foot, Pearl Foot, Foot
---|---