elna 202-088-200 Piping Foot Instructions
- June 13, 2024
- Elna
Table of Contents
PIPING FOOT
for 9 mm stitch width sewing machines
Ref: 202-088-200
202-088-200 Piping Foot
Make your own piping or apply ready-made piping with this foot to create a professional looking finish on home deco projects or garments.
Caution
Make sure to press the Lockout key when replacing the foot or attaching a
binder.
For models without the Lockout key, turn the power switch off when attaching
and detaching the foot and binder.
Please refer to your machine’s instruction manual for accessory attachment and
removal information.
Machine Settings
Stitch pattern: Straight stitch (center needle position)
To sew:
-
Raise the needle and the piping foot.
-
Insert the corded piping tape between two pieces of fabric (right sides together) and place them under the foot. Make sure the edge of the tape is aligned with the edge of the fabric.
-
Lower the foot so that the corded part of the tape fits in the left groove on the bottom of the foot. Sew the fabric while guiding the piping into the left groove as shown.
- The right groove can be used for making piping tape.
Elna International Corp. SA / 23.02.2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>