elna Type B Cording Foot Instructions
- June 13, 2024
- Elna
Table of Contents
CORDING FOOT (TYPE B)
Ref: 202-035-017
Type B Cording Foot
Use the cording foot with cord or yarn to reinforce the edge of knit fabrics
and prevent stretching.
This also creates a padded edge adding shape and strength to home decorative
projects and garments.
For your safety, turn off the power switch before changing any attachments
To create padded edges (with wide rolled hems):
- Replace the foot with the cording foot.
- Set the machine for 1-needle 3-thread wide rolled hemming (using the left needle). (Refer to the machine instruction book)
- Set the lower knife in its rightmost position by turning the cutting width adjusting dial.
- Raise the foot and insert the cord into the cord guiding hole and cord groove. Pull the cord behind the foot.
- Place the fabric on top of the cord just in front of the upper knife. Make sure that the cord is aligned with the indicator line and start sewing slowly.
Thread tensions:
To create padded edges:
Left
Needle| Right
Needle| Upper
looper| Lower
looper
---|---|---|---
4| ****| 3| 7
To prevent from stretching:
Left
Needle| Right
Needle| Upper
looper| Lower
looper
---|---|---|---
3| 3| 3| 3
| To create padded edges| To prevent from stretching
---|---|---
Stitch length| R| | | 3 – 4
Differential feed dial| | 10|
Upper knife| | Activated|
Needle plate setting knob| R| | | S
To prevent knits from stretching:
-
Replace the foot with the cording foot.
-
Set the machine for ordinary 2-needle 4-thread serging or 1-needle 3-thread serging (using the right needle). (Refer to the machine instruction book).
-
Raise the foot and insert the cord into the cord guiding hole and cord groove. Pull the cord behind the foot.
Place the fabric under the cord and lower the foot. -
Make sure that the cord is aligned with the indicator line and start sewing slowly.
Elna International Corp. SA / 29.04.2022
Documents / Resources
| elna
Type B Cording
Foot
[pdf] Instructions
Type B Cording Foot, Type B, Cording Foot, Foot
---|---