elna eXpressive 850 Sewing Machine Instructions
- June 13, 2024
- Elna
Table of Contents
elna eXpressive 850 Sewing Machine
Product Information
| Accessory Code | Accessory Name |
|---|---|
| 200-133-021 | Seam ripper |
| 202-025-405 | Long quilting guide bar set |
| 200-334-024 | Zipper foot narrow |
| 202-080-202 | Rolled hem foot (6mm) D1 |
| 200-347-020 | Manual needle threader |
| 202-081-203 | Rolled hem foot (4mm) D2 |
| 200-444-419 | Wide ribbon guide |
| 200-445-029 | Bobbin case (for free motion quilting) |
| 202-082-204 | Extra-large buttonhole foot B |
| 202-083-205 | Straight stitch foot ST |
| 202-084-206 | Border guide foot FB |
| 202-089-201 | Clear view quilting foot OV |
| 202-085-207 | Cording foot H |
| 202-090-205 | Ribbon/sequin foot RS |
| 202-086-208 | Applique foot AP |
| 202-091-206 | Ultra glide foot U |
| 202-087-209 | Ditch quilting foot S |
| 202-093-208 | Pintuck foot (Wide) N1 |
| 202-088-200 | Piping foot I |
| 202-094-209 | Pin tucking foot (Narrow) N2 |
| 202-095-200 | Ruffler foot RF |
| 202-100-209 | Edge guide foot SE |
| 202-096-201 | Gathering foot V |
| 202-142-007 | Free motion couching foot FMC |
| 202-097-202 | Beading foot (2) L1 |
| 202-156-004 | Concealed zipper foot Z |
| 202-098-203 | Beading foot (4) L2 |
| 202-099-204 | Binder foot W |
| 202-157-005 | Optic magnifier set x1.2, x1.4, x1.6 |
| 202-234-007 | Convertible even feed foot set |
| 202-237-000 | Ultra glide foot and needle plate set |
| 202-245-001 | Quilt binder set (for easy set bobbin) W1 |
| 202-238-001 | Pin tuck cording guides (narrow/thick cording) |
| 202-239-002 | Clear View 1/4 seam foot for straight stitch needle plate |
(OM)
202-253-002| Bobbin holder unit for embroidery use
202-294-005| Sliding guide foot SG
202-242-008| Circular sewing attachment
202-313-104| 1/4 seam foot without guide
202-243-009| Convertible free motion quilting set
202-391-003| Tape guide foot TG
202-399-001| Optic magnifier
858-417-007| Large foot controller
202-420-002| Roller foot HD
494-405-105| Insert Plate D for universal table stand for extension table
494-710-003
802-422-002| Quilting guide
858-418-008| Remote thread cutting switch unit
859-442-200| Clothsetter 1
859-449-012| Spool stand (2 threads)
832-820-007| Button shank plate
859-450-005| Spool stand (5 threads)
859-825-016| Cloth guide
861-407-004| Free arm hoop – FA10 – 100 x 40 mm
861-406-014| Extra-wide table
861-801-002| Straight stitch needle plate
Product Usage Instructions
To use the eXpressive 850 sewing machine, follow these steps:
- Set up the machine on a stable surface and plug it into a power source.
- Select the desired accessory from the list of optional accessories.
- Attach the selected accessory to the machine according to the manufacturer’s instructions.
- Thread the needle using the manual needle threader (200-347-020) if necessary.
- Insert the bobbin into the bobbin case (200-445-029) for free motion quilting if needed.
- Select the desired stitch pattern and adjust the stitch settings as desired.
- Place the fabric under the presser foot and lower the presser foot lever.
- Using the foot controller (858-417-007), gently press down to start sewing.
- Guide the fabric evenly and smoothly to create the desired stitches.
- Once finished, raise the presser foot lever and remove the fabric from the machine.
- Repeat steps 2-10 for any additional sewing tasks.
- When done, un
HOW TO USE
|
200-133-021
Seam ripper
| |
202-025-405
Long quilting guide bar set
---|---|---|---
|
200-334-024
Zipper foot narrow
| |
202-080-202
Rolled hem foot (6mm) D1
|
200-347-020
Manual needle threader
| |
202-081-203
Rolled hem foot (4mm) D2
|
200-444-419
Wide ribbon guide
| |
202-082-204
Extra-large buttonhole foot B
|
200-445-029
Bobbin case (for free motion quilting)
| |
202-083-205
Straight stitch foot ST
|
202-084-206
Border guide foot FB
| |
202-089-201
Clear view quilting foot OV
---|---|---|---
|
202-085-207
Cording foot H
| |
202-090-205
Ribbon/sequin foot RS
|
202-086-208
Applique foot AP
| |
202-091-206
Ultra glide foot U
|
202-087-209
Ditch quilting foot S
| |
202-093-208
Pintuck foot (Wide) N1
|
202-088-200
Piping foot I
| |
202-094-209
Pin tucking foot (Narrow) N2
|
202-095-200
Ruffler foot RF
| |
202-100-209
Edge guide foot SE
---|---|---|---
|
202-096-201
Gathering foot V
| |
202-142-007
Free motion couching foot FMC
|
202-097-202
Beading foot (φ2) L1
| |
202-156-004
Concealed zipper foot Z
|
202-098-203
Beading foot (φ4) L2
| |
202-157-005
Optic magnifier set x1.2, x1.4, x1.6
|
202-099-204
Binder foot W
| |
202-234-007
Convertible even feed foot set
|
202-237-000
Ultra glide foot and needle plate set
| |
202-245-001
Quilt binder set (for easy set bobbin) W1
---|---|---|---
|
202-238-001
Pin tuck cording guides (narrow/thick cording)
| |
202-253-002
Bobbin holder unit for embroidery use
|
202-239-002
Clear View 1/4″ seam foot for straight stitch needle plate (OM)
| |
202-294-005
Sliding guide foot SG
|
202-242-008
Circular sewing attachment
| |
202-313-104
1/4 seam foot without guide
|
202-243-009
Convertible free motion quilting set
| |
202-391-003
Tape guide foot TG
|
202-399-001
Optic magnifier
| |
858-417-007
Large foot controller
---|---|---|---
|
202-420-002
Roller foot HD
| |
858-418-008
Remote thread cutting switch unit
|
494-405-105
Insert Plate D for universal table stand
for extension table 494-710-003
| |
859-442-200
Clothsetter 1
|
802-422-002
Quilting guide
| |
859-449-012
Spool stand (2 threads)
|
832-820-007
Button shank plate
| |
859-450-005
Spool stand (5 threads)
|
859-825-016
Cloth guide
| |
861-407-004
Free arm hoop – FA10 – 100 x 40 mm
---|---|---|---
|
861-406-014
Extra-wide table
| |
861-801-002
Straight stitch needle plate
November 2019 Subject to changes without notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>