AMOOWA P07S Pico Mini Smart Projector Quick Operation Guide

AMOOWA P07S Pico Mini Smart Projector

Projector Brief Introduction

Package

Appearance design

Remote control introduction

Note: The remote included only controls the Pico projector.

Using Guide

Power on

Holding the power button for 5 seconds(P1).

Power off

Holding the power button for 5 seconds(P1).

Method of long-distance Power

On/Off by remote control

1. Power on
   Plug the adapter into the Micro USB charging interface (P2-1) Holding the power button of the remote control for 2 seconds (P2-2) After displaying charging power instructions, continue to hold the power button of the remote control for 3 seconds (P2-3)

2. Power off
   Hold the power button of the remote control for 3 seconds.

Adjust focus/lightness

1. Adjust focus
   Slide the gear to adjust the projection screen definition(P2)

2. Adjust lightness
   On the main page choose “setting” “projector setting” “LED” brightness

Bluetooth controller pairing

Pairing method:

After entering the remote controller pairing page, hold the “OK” button and “volume -“ for five seconds then lose and wait till connect success.

Or: Enter into setting ➔ Bluetooth Setting, according to the tips to connect the Bluetooth controller or other Bluetooth device.

Connect Wi-Fi network

Or: Enter into setting ➔ WiFi Setting ➔ WiFi Setting, Searching and connecting.

Operation of the main interface

Projection screen

1. Airplay ➔ iPhone

2. In the WiFi environment: Enter iPhone’s “Setting” -” Wi-Fi”, then connect your phone to the same network with the projectors;

3. No WiFi environment: Enter iPhone’s “Setting” — “Personal Hotspot”, Open “Hotspot” , then connect a projector to it; Or enter the projector’s
   “Settings” – “Network Settings” – “Network Hotspot”, open the hotspot and connect iPhone to the hotspot;

4. Back toward the phone home page, slide up to open the control panel, then click Airplay;

5. Choose “XXX-XXXXXX-XXX” , then open “Mirroring” and done.

Airplay ➔ Mac

1. Projector Networked:
2. Click “ ” and connect it to the Projector through the same network.
3. Projector Non-networked: Click” “, Choose “AndroidAP” and connect.
4. Click” “, choose “XXX-XXXXXX-XXX” and be done

Miracast (Android’s Phone)

1. Open mobile phone’s “setting” —Click “More Wireless Settings” — Open “Cast screen” –Searching and connecting!
2. For some Android mobile phones, open the shortcuts menu, click such as screen sharing/ mirroring/ screen projection Display/ WLAN Display/ wireless Display/ Multi-screen/ Smart View, search, and connect to the device, if can’t find miracast function, Please contact Customer Service.

Description of external equipment

How to connect a USB flash drive

1. Insert the U disk into the USB-OTG port, open the “File Management” application, and the device can be identified
2. You can also go to “MY APPS – >File Manager” to check

How to use Netflix

First, the remote control of the mini projector needs to be connected to Bluetooth. (If you don’t know how to connect) After connecting Bluetooth, press the  mouse button to enter mouse mode. Press Left/Right/Up/Down to exit the empty mouse state.

Note: the first time turn on the wizard, pair the Bluetooth remote control, or enter the “Settings- Bluetooth Settings” under the paired Bluetooth remote control, the mouse can be used.

Open the Netflix login number and password and follow the Netflix app tips. Watch the video after successfully logging in.

How to update firmware (local update)

local update:

1. Download new firmware from the product website.
2. Copy the firmware file update. zip to the root directory of TF card.
3. Insert the TF card to projector slot then the songone app will hint you update software.
4. Click update button to update.

How to charge

1. Plug the adapter to the Micro USB charging interface.
2. Solid red light indicate charging.
3. Solid blue light indicate charging completed.

Trapezoid correction

Setting-Trapezoid Correction

Adjust the coordinates of the four points (X, Y) of the rectangle shape through the four buttons of the remote control, and solve the problem of the projected image ladder caused by the projection tilt angle

“OK” Check positon; “UP/ DOWN/ LEFT/ RIGHT” Adjust angle; “MENU” Reset status; Back Come back.

Other function

1. How to read the U disk contents
2. Connect USB OTG cable to Micro USB interface of projector.
3. Connect U disk to the other side of USB OTG interface, the system will automatically pop up the file management interface.
4. How to connect bluetooth speaker
5. Setting-Bluetooth Setting.
6. Open the bluetooth speaker and enable bluetooth pairing mode.
7. Click the scan search device on the projector interface.
8. The name of the corresponding bluetooth speaker will be displayed in the available devices.
9. Click connection to show that the bluetooth speaker is connected.

Product Reference

Note: This manual is for reference only. Information in the manual is subject to change without prior notice.The manufacturer does not take any direct or indirect responsibility.

FAQs

What is the native resolution of the AMOOWA P07S Pico Mini Smart Projector?

The native resolution of the AMOOWA P07S Pico Mini Smart Projector is 854 x 480 pixels (WVGA).

What is the brightness level of this mini smart projector?

The AMOOWA P07S projector has a brightness level of 200 ANSI Lumens, providing clear visuals in dimly lit environments.

Can I connect my smartphone or tablet to this smart projector?

Yes, you can connect your smartphone or tablet to the projector using wireless screen mirroring technologies like AirPlay or Miracast, depending on your device's compatibility.

What is the maximum screen size this projector can create?

The projector can project an image size ranging from 30 inches to 120 inches (diagonal), offering a flexible and portable viewing experience.

Does it have built-in Wi-Fi for online streaming?

Yes, the AMOOWA P07S Pico Mini Smart Projector is equipped with built-in Wi- Fi, allowing you to access online content and streaming services directly from the projector.

Is there a built-in speaker in this smart projector?

Yes, the projector features a built-in 2-watt speaker for audio playback. For better sound quality, you can connect external speakers or headphones.

What are the input options for connecting external devices?

The projector offers various input options, including HDMI, USB, and microSD card slot, enabling you to connect a wide range of devices such as laptops, gaming consoles, and USB drives.

Can I use this smart projector for outdoor movie nights?

Yes, you can use the AMOOWA P07S projector for outdoor movie nights, but it's best suited for dark or low-light outdoor settings due to its limited brightness.

Is there a remote control included with this mini smart projector?

Yes, the mini smart projector comes with a remote control for convenient navigation and control of the projector's settings.

Is there a warranty included with this smart projector?

Typically, the AMOOWA P07S Pico Mini Smart Projector comes with a manufacturer's warranty. Please refer to the product documentation or contact the manufacturer for warranty details.

What is the lamp life of this projector?

The lamp of the projector has a rated lifespan of approximately 20,000 hours, ensuring long-lasting performance and minimal maintenance.

Is there an autofocus feature on this mini smart projector?

Yes, the projector includes autofocus functionality, allowing it to automatically adjust and achieve a sharp and clear image on the screen.

Download this PDF Link: AMOOWA P07S Pico Mini Smart Projector Quick Operation Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>