Hogenl iPad 9th Generation Case for Kids with Screen Protector Installation Guide

Hogenl iPad 9th Generation Case for Kids with Screen Protector

Installation Instructions for iPad 9th Generation Accessories

Case Installation for iPad 9th Generation 10.2 Inch

1. Peel off the edge of the silicone gently from the right bottom.
2. Take out the Hard plastic frame.
3. After aligning the camera hole, put the iPad into the hard plastic frame.
4. Put the silicone skin back and keep the silicone fit the case snugly.
5. Kickstand feature: Supports two different angles as you need.
6. Thread the shoulder strap rope into the small hole, then use the tools to hook out the shoulder strap and tighten it.

Screen Protector Installation for iPad 9th Generation 10.2 Inch

1. Use the Alcohol cloth to clean the screen.
2. Make screen protectors directed at holes and edges.
3. Use the microfiber cloth to clean the screen in the same direction.
4. Lay down the screen protector and touch it lightly.
5. Use the dedusting sticker to clean the screen if it still has dust.
6. Tear off the cover of the screen protector.

Specifications

FAQ

• How do I ensure the screen protector aligns correctly?
• Make sure the screen protector is directed at the holes and edges of the iPad before laying it down.
• What should I do if there are still dust particles after using the alcohol cloth?
• Use the dedusting sticker to remove any remaining dust from the screen.
• How can I adjust the viewing angle when using the kickstand?
• The kickstand feature supports two different angles which can be adjusted as needed for optimal viewing.

Installation Instructions

Installation for iPad 9th generation case 10.2 inch

1. Peel off the edge of the silicone gently from the right bottom.
2. Take out the Hard plastic frame.
3. After aligning the camera hole, put the iPad into the hard plastic frame.
4. Put the silicone skin back and keep the silicone fit the case snugly.
5. Kickstand feature: Supports two different angles as you need.
6. Thread the shoulder strap rope into the small hole, then use the tools to hook out the shoulder strap and tighten it.

Installation for iPad 9th Screen Protector 10.2 inch

1. Use the Alcohol cloth to clean the screen.
2. Make screen protectors be directed at holes and edges.
3. Use the microfiber cloth to clean the screen in the same direction.
4. Lay down the screen protector and touch it lightly.
5. Use the dedusting sticker to clean the screen if it still has dust.
6. Tear off the cover of the screen protector.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>