Elaqda B09HZ2QJ63 Smart Corner Flood lamp 16 Million Colors Changing User Guide

Elaqda B09HZ2QJ63 Smart Corner Flood lamp 16 Million Colors Changing User Guide

PACKING ACCESSORIES

Please check the packing box and accessories when you got the floor lamp in hand.

1. 3 Pcs Lamp Pole

2. 1 Pcs Lamp Base

3. 1 Pcs Remote Control (Include Battery)

4. 1 Pcs Power Adapter

PRODUCT SPECIFICATION

INSTALLATIONS

Note:

1. Please DO NOT connect to the power before installation.
2. Install in order from lamp pole 1 to 2,3,4. (Pole 2,3 are interchangeable)
3. As shown in the middle image, make the three plastic part plug into the aluminum tube.

APP CONNECTION

1. Download
   You can search for [Smart Life]or [Tuya Smart] in various APP stores or scan the QR code above to download.

   • SMART LIFE APP
     

   • TUYA SMART APP
     

2. Register an account on your [Smart life] or [Tuya Smart] app.

3. In the [Smart life] or [Tuya Smart] app, on the top corner of Device screen, Click “+” Choose lighting then press “Next Step ” or add option pop-up on screen.

4. Enter your WIFI network and password.

5. The Smart life app will try to connect your device, then click finish to enter the operation panel after successful distribution network
   Note: The router must be 2.4GHz.

[TUYA SAMRT] APP CONNECTION

DESCRIPTION OF EACH INTERFACE OF APP

1. Edit Interface description.

2. Music interface description (Figure 5.2).

3. Custom operation Instruction (Figure 5.3).

4. Operation instructions for scene mode(Figure 5.4).
   

5. Turn ON/OFF the lights.

6. Switch various scene modes.

7. Music Interface description(Figure 5.5).
   

8. App rhythm modes.

9. Sensitivity adjustment 1%-100%.

10. Timer, notification, ON/OFF setting(Figure 5.6).
    

11. Set a timer to turn on and off the lights.

REMOTE CONTROL INSTRUCTION

1. DIY modes: Press DIY1/DIY2/DIY3 first; Press the above 6 buttons to adjust the brightness of the red, green and blue colors to match the colors you like
2. Time timing: Set the timer to close after 1 hour/2 hours/3 hours/4 hours
3. Mode: Breath /Flash /Jump /Gradient /Symphony/ Trail/ Popular/ Stacking/ Adjoint
4. 4 music mods: Classic/ Soft /Dynamic/ Disco

FAILURE ANALYSIS AND SOLUTION

The fault phenomenon

|

Cause analysis

|

Solution

---|---|---

Not bright

| 1)The switching power supply is dead. 2)The positive and negative poles of the power supply are connected negatively. 3)Wrong or insecure connection.| 1)Check the switching power supply. 2)Correct it. 3)Check the writing.

Wrong color

| 4)RGB static color setting error.| 4)Set RGB static colors.

Mode unchanged

| 5)The speed is set too slowly.| 5)Please press the speed button to speed up.

Can’t remote control

| 6)Remote control. 7)Out of control distance.| 6)Replace the battery 7)Reduce remote control distance.

Warm tips:

1. Please remove the plastic insulation gasket before using the remote control.
2. Please align the lamp base when using the remote control.
3. 1f the lamp pole does not light up during installation, please adjust the tightness of the lamp.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>