behringer VD400 Vintage Analog Delay Effects Pedal Instruction Manual
- June 13, 2024
- Behringer
Table of Contents
VINTAGE DELAY VD400
Vintage Analog Delay Effects Pedal
Thank you for showing your confidence in us by purchasing the Behringer
VINTAGE DELAY VD400. This ultimate effects pedal is designed to deliver
amazing delay sounds comparable to state-of-the-art studio processors. Thanks
to its parameter controls, you’ll have plenty of cool sounds at your disposal
to handle almost any situation.
The delay effect creates a delay of the input signal with various repetitions.
Different tempo settings allow interesting delay effects.
Controls
-
The REPEAT RATE control adjusts the delay time (repetition rate).
-
The ECHO control adjusts the effect output level.
-
INTENSITY control adjusts the number of repetitions.
-
The ON/BATT LED illuminates when the effect is activated.
It also serves as a battery level indicator. -
Use the footswitch to activate/deactivate the effect.
-
Use this ¼” TS IN connector to plug in the instrument cable.
-
The ¼” TS OUT connector sends the signal to your amp.
-
The ¼” TS DIR OUT connector sends the unaffected signal to connect, for example, to a separate amp.
◊ ◊ If you use the OUT connector only, it will send the affected signal and, when deactivated, the unaffected signal. When using both the OUT and the DIR OUT, the VD400 acts like an A/B box. This means when activated, the OUT sends only the echo signal while the DIR OUT carries the dry signal. When deactivated the OUT is muted while the DIR OUT sends the unaffected signal.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery (not included), press the hinges with a
ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.
◊ ◊ The VD400 has no on/off switch. As soon as you insert the plug into
the in connector, the VD400 is on. When not in use, remove the plug from the
in connector. This extends the life of the battery.
The SERIAL NUMBER is located at the underside.
Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
Limited Warranty
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.
Specifications
In
| Connector | ¼” TS |
|---|---|
| Impedance | 500 kΩ |
Out
| Connector | ¼” TS |
|---|---|
| Impedance | 1 kΩ |
Power Supply
9 V?, 100 mA regulated
Behringer PSU-SB
| USA/Canada | 120 V~, 60 Hz |
|---|---|
| Europe/U.K./ Australia | 230 V~, 50 Hz |
| China | 220 V~, 50 Hz |
| Korea | 220 V~, 60 Hz |
| Japan | 100 V~, 50/60 Hz |
| Power connector | 2 mm DC jack, negative center |
| Battery | 9 V type 6LR61 |
| Power consumption | 30 mA |
Physical/Weight
Dimensions (H x W x D)| approx. 2 1/8 x 2 3/4 x 4 4/5″ approx. 54 x 70 x 123
mm
---|---
Weight| approx. 0.73 lbs / 0.33 kg
Behringer is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from time
to time to existing products without prior notice. Specifications and
appearance may therefore differ from those listed or shown.
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and other
information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim,
Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
** Hereby, Music Tribe declares that this product is in compliance with
Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU,
Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive
1907/2006/EC. Full text of EU DoC is available at
https://community.musictribe.com/**
EU Representative: Music Tribe Brands DK A/S Address: Ib Spang Olsens Gade 17,
DK – 8200 Aarhus N,Denmark
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>