AMOOWA P07S Pico Projector User Guide

AMOOWA P07S Pico Projector User Guide

Projector Brief Introduction

Package

• Projector

• Adapter

• USB cable

• OTG cable

• Remote Control

• Tripod

• Manual

Appearance design

1. Battery mode
   • Power on with full power solid blue light
   • \Low Power: red light flashing
2. Battery charging mode
   • Charging: solid red light
   • Full power: solid blue light

Remote control introduction

Bluetooth pairing mode
Hold both “OK” and “Volume- ” button five seconds to start remote control pairing mode

Mouse mode
Start: click mouse button Close: click navigation up-button

Indicator light status
Slow flash: unpaired mode

Note: The remote included only controls the Pico projector.

Power on
Holding power button s seconds (P1).

Power off
Indicator light Holding power bunion s seconds(P1).

Method of long-distance Power v the keyboard can be called up) 0On/Off by remote control

Power on
Plug the adapter to the Micro USB charging interface **(P2-1)

**

Holding power button of remote control 2 seconds **(P2-2)

**

After display charging power instructions, continue to hold power button of remote control 3 seconds **(P2-3)

**

Power off
Holding power button of remote control 3 seconds.

Adjust focus/lightness

1. Adjust focus Slide the gear to adjust the projection screen definition (P2)
2. Adjust lightness In the main page chose “setting” -“projector setting” -“LED brightness

Bluetooth controller pairing

Press “back button” to skip this step

Pairing method:
After enter remote controller pairing page, hold “OK” button and “volume-” five seconds then loose and wait it till connect success. Or: Enter into setting→ Bluetooth Setting, according to the tips to connect the Bluetooth controller or other bluetooth device.

Connect Wi-Fi network

Or: Enter into setting→ WiFi Setting→ WiFi Setting, Searching and connecting.

Operation of the main interface

Scan this QR code to know more about Whale system

Projection screen

Airplay → iPhone

1. 1. In Wi-Fi environment: Enter iPhone’s “Setting” “Wi-Fi”, then connect your phone to the same network with projector’s; 2 No Wi-Fi environment: Enter iPhone’s “Setting” — “Personal Hotspot”, Open “Hotspot”, then connect projector to it; Or enter the projector’s “Settings” – “Network Settings” – “Network Hotspot”, open the hotspot and connect iPhone to the hotspot;
2. Back toward the phone home page, slide up to open the control panel, then click Airplay;
3. Choose “XXX-XXXXXX-XXX”, then open “Mirroring” and done.
   

Airplay – Mac

1. Projector Networked: Click ” “, Connect it to Projector through the same network Projector Non-networked: Click ” , Choose “Androcidal” and connect.
2. Click “ , choose “XXX-XXXXXX-XXX” and be done

Miracast (Android’s Phone)

1. Open mobile phone’s “setting” –Click “More Wireless Settings” – Open “Cast screen” — Searching and connecting!
2. For some android mobile phone, open the shortcuts menu, click such as screen sharing / mirroring / screen projection Display / WLAN Display / wireless Display / Multi-screen / Smart View, search and connect to the device, if can’t find miracast function, Please contact Customer Service.

Description of external equipment

How to connect a USB flash drive

1. Insert the U disk into the USB-OTG pott, open the “File Management” application, and the device can beidentified
2. You can also go to “MY APPS->File Manager” to check
   

How to use Netflix

First, the remote control of the mini projector needs to be connected to Bluetooth. (f you don’t know how to connect, )

After connecting Bluetooth, press the mouse button to enter mouse mode. Press Left/Right/Up/Down to exit the empty mouse state.

Note: the first time turn on the wizard, pair the Bluetooth remote control, or enter the “Settings – Bluetooth Settings” under the paired Bluetooth remote control, the mouse can be used.

Open the Netflix login number and password and follow the Netflix app tips. Watch the video after successfully logging in.

How to update firmware (local update)
**local update

**

1. Download new firmware from the product website.
2. Copy the firmware file update. zip to the root directory of TF card.
3. Insert the TF card to projector slot then the songone app will hint you update software.
4. Click update button to update.

How to charge
Plug the adapter to the Micro USB charging interface. Solid red light indicate charging. Solid blue light indicate charging completed.

Trapezoid correction
Setting-Trapezoid Correction Adjust the coordinates of the four points (X, Y) of the rectangle shape through the four buttons of the remote control, and solve the problem of the projected image ladder caused by the projection tilt angle

“OK Check position; “UP / DOWN / LEFT / RIGHT” Adjust angle; “MENU” Reset status; Back Come back.

Other function

1. How to read the U disk contents
2. Connect USB OTG cable to Micro USB interface of projector.
3. Connect U disk to the other side of USB OTG interface, the system will automatically pop up the file management interface.
4. How to connect Bluetooth speaker
5. Setting-Bluetooth Setting.
6. 0pen the Bluetooth speaker and enable Bluetooth pairing mode.
7. Click the scan search device on the projector interface.
8. The name of the corresponding Bluetooth speaker will be displayed in the available devices.
9. Click connection to show that the Bluetooth speaker is connected.

FCC Statement

digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there s no guarantee that interference will not occurin a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following, measures:

• Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Toassure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’ s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).

This equipment complies with Part 15 of the FCC Rules. Operation s subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCCRadiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment, This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Product Reference

Note: This manual i for reference only. Information in the manual is subject to change without prior notice. The manufacturer does not take any direct or indirect responsibilty.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>