FIAMMA 06771E02Q Caravanstore ZIP XL Instruction Manual

FIAMMA 06771E02Q Caravanstore ZIP XL

Product Information

The product is an awning called FIAMMASTORE. It is available indifferent sizes (280, 310, 360, 410, 440, 500, and 550). The awning is designed for caravans and comes in a CaravanStore ZIP XL model. The awning is made with high-quality materials and is available in two colors: Royal Grey (R) and Royal Blue (Q). It is lightweight and easy to install. The package includes all the necessary components for installation.

Product Usage Instructions

1. Before installation, carefully check all the components to ensure that nothing has been damaged or deformed during transport.
2. If you have any doubts or questions about the installation, use, or limitations of the product, it is recommended to contact your dealer for assistance.
3. It is advisable to have the installation carried out by qualified personnel who are familiar with local regulations.
4. Follow the installation instructions provided in the user manual for step-by-step guidance.
5. After the awning is installed, it can be used according to your needs. The user manual provides detailed instructions on how to operate and maintain the awning.

For any warranty-related concerns, refer to the warranty section in the user manual.

Package contents

Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. We recommend that the installation is carried out by qualifi ed personnel and in compliance with current local regulations.

Installation instructions

Before proceeding, check that the bag is well laid out and, at the same time, that there are no obstacles at the hole in the vehicle.

Instructions for use

After unrolling the awning completely, adjust the legs at the chosen height.
To avoid the awning being lifted up by an unexpected gust of wind, it is necessary to secure the legs to the ground with the provided hooks.

PARTIAL OPENING OF CARAVANSTORE XL
Partial opening of the CaravanStore XL is only possible from model sizes 360-550cm.
ATTENTION! Partial opening of the awning can only be performed if the Wall Fixing Brackets have been mounted to the wall of the vehicle. Canopy must always be rolled from the top. Unroll the roller tube 6 turns keeping the Fiamma logo horizontal.

Safety instructions

Possibility to wrap the canopy in both directions. Attention: wrap the canopy correctly before putting it in the bag and make sure that the legs are well stowed in the roller tube. The thickness/volume may block the zip’s closure

We remind you that the awning is a sun protection, so please close your awning in case of rain, wind or snow. Otherwise, please take the following precautions: lower one side of your awning, so that water can fl ow away and place the tension rafter.

In case of problems please contact your local dealer indicating the data on the nameplate. Consult our website for spare parts drawing.

Read the following instructions and warnings carefully; failure to observe these installation and usage instructions as well as the Highway Code in the relevant country may cause severe harm or damage for which the manufacturer declines all responsibility.
Keep the original packaging to be used in case of return.
In the event of an accident involving the vehicle and/or the product, ensure that the product has not been damaged. In the event of damage, contact your local retailer before moving the vehicle.
Fiamma declines every responsibility for any modification of the product that may cause damage and/or injury to things and people.
Before installation, ensure compatibility with the vehicle on which the product must be installed.
Checking that the wall/rear door is sufficiently solid and suitable for guaranteeing the resistance of the anchoring points is always mandatory. If this is not the case, tightness is not guaranteed and it will be necessary to reinforce it.
If in any doubt then we recommend removal of the awning after use and not to travel with the awning fixed to the vehicle. Fiamma refutes any responsibility for damage to lightweight walls caused during use.
Before leaving, make sure the awning is correctly closed. A damaged fabric does not allow the awning to perfectly roll in. Never use the awning with a damaged fabric.
The awnings are produced with a high quality standard, but some characteristics of the materials (as little imperfections on paint or linearity of aluminum profiles; minor marks or light strains of plastic parts), which could be interpreted as defects, come from the materials and from the specific work processes, and take place even though Fiamma uses advanced, innovative machinery and production and packaging techniques.
Apart from our strict quality controls, we also have our fabrics continuously checked by independent laboratories to ensure that they are resistant to tear, to the pressure of water and to weather agents, and that their colours are light-fast. To guarantee a perfect quality, the fabrics are waxed or laminated several times.
During this operation, single coloured pigments may move and thus create small bright spots in the material, which are only irregularities that are technically unavoidable, but do not compromise the waterproofing of the fabric.

MAINTENANCE INSTRUCTIONS

Make sure that your awning is completely dry and clean before closing it.
The remaining humidity could cause stains. If, however, you have no choice but closing the awning when it is still wet, make sure to open it for drying within 12 hours maximum. Most dirt is superficial and can be removed with water and a clean cloth or soft brush. If the fabric is very dirty, add some neutral detergent (Marseille soap).
Never use any aggressive chemical and never clean the fabric with a high pressure machine. We recommend not to use the awning at a temperature below 0°C.
It is recommended not to wash the outer casing of the awning with an aggressive product (or a rough cloth) that could change the surface finishes or materials.
If the awning is more than 100 mm out of the vehicle shape, the presence of the awning must be recorded in the vehicle’s registration documents (DIN 75303 – 2019).

Accessories

Warranty Fiamma

In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.

Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA) fiamma.com

All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time, without notice, prices, materials, specifications and models or to cease production of any model.

References

• amma.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>