XGIMI HORIZON Ultra Portable Box User Guide
- June 13, 2024
- XGIMI
Table of Contents
HORIZON Ultra
User Guide
Overview
Rear view
Note: An HDMI 2.1 cable should be used on the HDMI 2.1 port.
Remote control
A | B | C | D | E | F | G | H | I | J |
---|---|---|---|---|---|---|---|---|---|
Power | Seings | ||||||||
Assistant | Navigation | Return | Home | VOL- | VOL+ | Menu | Focus |
Please read the Product Instructions carefully before using the product.
Thank you for buying and using the products of XGIMI Technology Co., Ltd.
(hereinafter referred to as “XGIMI Technology” or “XGIMI”). You should read
the Product Instructions carefully before using this product for both your
safety and interests.
XGIMI Technology will assume no responsibility for any personal injury, damage
to property or other loss caused because due to failure to operate this
product according to the Product Instructions or precautions.
About the Product Instructions (hereinafter referred to as “the
Instructions”)
Copyright of the Instructions belongs to XGIMI Technology;
Trademarks and names mentioned in the Instructions belong to their respective
right owners; In the case of inconformity between the content of the
Instructions and the actual product, the actual product shall prevail.
Google, Android TV, and Chromecast built-in are trademarks of Google LLC.
Google Assistant is not available in certain languages and countries.
| HDMI High-Definition Multimedia interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
---|---
| For DTS patents, see http://patents.dts.com.
Manufactured under license DTS Licensing Limited (for all other companies).
DTS, DTS-HD Master Audio,DTS-HD, Virtual:X, and the DTS-HD logo are registered
trademarks or trademarks of DTS, Inc. in the United States and other
countries.© 2021 DTS, Inc. ALL RIGHTS RESERVED.
| Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation. Manufactured under license from
Dolby Laboratories. Confidential unpublished works. Copyright © 1992–2022
Dolby Laboratories. All rights reserved.
Disposal instructions for used products:
The product is designed and manufactured with high quality materials and
components that are recyclable.
Where you see either symbol on any of our electrical products, ba eries or
packaging, it indicates that the relevant electrical product or ba ery should
not be disposed of as general household waste in the EU, UK, Turkey, or other
countries with separate waste collection systems available. To ensure correct
waste treatment, please dispose of them via an authorised collection facility,
in accordance with any applicable laws or requirements. Waste electrical
products and ba eries may also be disposed of free of charge via retailers
when buying a new product of the same type. Furthermore, within the UK and EU
countries larger retailers may accept small waste electronic products free of
charge. Please ask your local retailer if this service is available for the
products you wish to dispose of. In so doing, you will help to conserve
natural resources and improve standards of environmental protection in
treatment and disposal of electrical waste.
This symbol may be used on ba eries in combination with additional
chemical symbols. The chemical symbol for lead (Pb) will appear if the ba ery
contains more than 0.004% lead.
- Model: XM13N
- XGIMI Technology reserves the right to interpret and amend the Instructions.
Getting Started
-
Power on / off
-
Remote control pairing
-
Remote control functions
Focus adjustment function:
Short press the “ ” to enable autofocus.
Long press the “ ” to enable manual focus.
Shortcut button:
To access the shortcut bu on function, short-press the “ ” . To access all se ings, press ” ” . -
Intelligent Screen Alignment
When Auto Keystone Correction is enabled, the display will be adjusted automatically to a square image whenever you move the device slightly or to another location. In addition, Auto Keystone Correction will not interfere with the projected content during the process, and the device will continue to work well on white, flat walls. -
Google Assistant
Google Assistant can be activated by pressing the” “bu on on the remote control.
Using your voice, you can quickly access entertainment, control smart devices, and get answers on screen. -
Settings
Adjust device and image se ings at any interface by pressing “ ” on the remote control. Specific functions for various se ings are as follows:Clear Apps| Remove apps from the device
---|---
Keystone Correction| Adjust the keystone for the projected image
Image Mode| Adjust image parameters under the video or signal source
Sound Settings| Adjust the device’s voice output channel
3D Video Setup| 3D se ings for video and signal sources
Sleep Timer| Automatically shut down the device after a pre-set time
All Settings| Se ings for other related functions
-
3D mode and Image mode settings can only be adjusted via the video play or signal source channel.
-
Frame ratio and HDMI version settings can only be adjusted via the HDMI channel.
-
Chromecast built-in TM
Cast your favorite entertainment apps—movies, TV shows, music, games, sports, and more—from your Android or iOS devices, Mac, Windows computer, or Chromebook to the device. Find Chromecast-enabled apps at g.co/castapps.
Quickly cast video and audio content to your TV by using ” ” on the supported mobile application. Screencasting will not be interrupted when you receive a call or message, and mobile phone ba ery consumption is minimal.
Entire frames on Android phones or Chrome browsers via PC can be cast to your TV.
Note: Screencasting is optimized for selected services only. Streaming quality for other content might vary. Supported operating systems and devices: AndroidTM2.3 Gingerbread and higher, i0S® 7 and higher, Windows® 7 and higher, Mac OS.10.7 and higher and Chrome OS (version 38 or higher). -
System upgrade
Online upgrade
The online upgrade can be made through system se ing WARNING:
Please refer to the information on the exterior bo om of the enclosure for electrical and safety information before installing or operating the apparatus.
-
CAUTION
Warning for remote controller and portal device
- There is a risk of explosion if the ba ery is replaced with the wrong type of ba ery;
- Disposal of a ba ery into fire, mechanically crushing or cu ing the ba ery, may result in an explosion;
- Do not leave ba ery in an environment with extremely high temperature that may result in an explosion or the leakage of flammable liquid or gas;
- Do not put ba ery in an environment with extremely low pressure that may result in an explosion or the leakage of flammable liquid or gas.
Correct use of the device:
- Do not face lens into eyes as injury to the eyes can be caused by the strong projector light.
- Do not block the air inlet/outlet of the device in order to avoid damage to internal electronic devices arising from normal heat dissipation failure of the device.
- Do not wipe the lens directly with cleaning tools including paper and cloth etc. in order to avoid damage to lens; please clean up the dust on the lens surface through clean air blowing.
- Do not wash the device with chemicals, detergents or any liquid in order to avoid corrosion of circuit board by rainwater, moisture and mineral-containing liquids.
- Keep the device and its components and accessories out of reach of children.
- Ensure that the device is used in a dry and ventilated environment.
- Do not store the device in overheated or overcooled places because extreme temperatures will shorten the lifespan of electronic devices. Permissible storage and usage environments should have a temperature range of 0°C to 40°C.
- Do not put the device into any heating equipment (such as a dryer or microwave oven) for drying.
- Do not extrude the device firmly or place barriers on it or its back to avoid damage to the device.
- Do not throw, strike, or sharply shake the device to avoid damage to the internal circuit board.
- Do not try to disassemble and assemble the device yourself. Please contact XGIMI after-sales service for any issues.
- Do not repair any product on your own. In the case of normal operation failure of the device or any component, consult XGIMI after-sales service promptly or return it to the factory for repair.
- Operations in the 5.15-5.35 GHz band are restricted to indoor usage only.
- When installing and operating the device, the distance between radiator and body should be at least 20cm.
- As with any bright sources, do not stare directly into the beam, RG2 IEC 62471-5:2015 Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as defined in IEC 62471-5:Ed. 1.0. For more information see Laser Notice No. 57, dated May 8, 2019.
- Be cautious when using earphones with the device as there may be excessive sound pressure from earphones and headphones that can cause hearing loss.
VCSEL Laser
Max output of laser radiation: Max. 60 µJ
Pulse duration: 15 Hz
Emi ed wavelength: 850 nm
Name and publication date of the standard: IEC 60825-1: 2014
Wi-Fi (5 GHz band) warning
High-gain directional antennas apply only to the fixed peer-to-peer
networking.
Do not place the device near radar systems.
FCC warning
The device meets provisions of part 15 of FCC rule. Operation meets the
following 2 conditions:
(1) the device will not cause harmful interference, and (2) the device must
accept any interference received, including interference that may result in
accidental operations. Users that intentional or unintentional modification
and replacement of radiators without explicit approval from the responsible
compliance party may prevent the user from operating the device. If the manual
is provided in a form other than paper, such as, provided in computer disk
through the Internet, then the information required in the section can be
included in the manual in the alternative form under the premise that users
can have access to the form information.
For B-class digital or peripheral device, instructions provided by users shall
include the following or similar statements and put them in a prominent place
of manual text:
Notes: the device has been tested to meet restrictions of part 15 of FCC rule
on B-class digital device. These restrictions are aimed at proving the
eective prevention of harmful interference in a residential installation. If
installation and use are not made according to the instructions, the device
will generate and radiate radio frequency energy, and may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If the device does
cause harmful interference to radio or television reception (determined by
stopping and starting the device), it is suggested that users should a empt to
correct the interference by one or more of the following measures:
Reposition direction of receiving antenna.
Increase the distance between the device and the receiver.
Connect the device to a circuit socket dierent from the circuit connected to
the receiver.
Consult distributors or experienced radio/television technicians to seek help.
Be careful that the product may emit harmful light radiation
FCC ID: 2AR82-SKIWB921AU1
Declaration of Conformity
XGIMI Technology Co., Ltd hereby declares that this product is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU ,Radio Equipment Regulations 2017 ,Directive 2011/65/EU and UK.
The Restriction of the Use of Certain Hazardous Substances in Electrical
,Electronic Equipment Regulations 2012, and compliance with REACH Directive
(Regulation No 1907/2006).
This product is allowed to be used in some of EU member states as illustrated
in the right chart.
This Frequency applies to the following Member States or the geographical area
within a Member State where restrictions on pu ing into service or
requirements for authorisation of use exist.
You can find the Declaration of Conformity on https://global.xgimi.com/pages
/product-support
ISED Warning
This device complies with Innovation, Science and Economic Evelopment Licence-
exempt RSS standard(s). Operation is subject to the following two conditions:
( ) 1
This device may not cause interference, and This device must accept any
interference, including interference that may cause undesired operation of the
device. (2) IC: 24728-SKIWB921AU1
Radiation Exposure Statement
The device is compiled by using FCC and ISED Innovation, Science and Economic
Evelopment radiation exposure limits specified for uncontrolled environments.
The transmi er shall not be placed or operated in conjunction with any other
antenna or transmi er.
For the LED projector, the device meets FCC and ISED Innovation, Science and
Economic Evelopment radiation exposure limits specified uncontrolled
environments.
- Only use a achments/accessories specified or providedby the manufacturer (such as the exclusive supply adapter etc).
- Beware that this product may emit harmful light radiation.
Wireless Specification
- Bluetooth version: 5.2
- Bluetooth transmi er frequency range: 2400 MHz – 2483.5 MHz
- Bluetooth transmi er power: ≤10 dBm (EIRP)
- Wi-Fi network: IEEE 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz)
- 2.4G Wi-Fi transmi er frequency range:
- 2412 – 2472 MHz (2.4 GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
- 2.4G Wi-Fi transmi er power: ≤20 dBm (EIRP)
- 5G Wi-Fi transmi er frequency range:
- 5.15 – 5.35GHz, 5.470 – 5.725GHz, 5.725 – 5.850GHz
- 5G Wi-Fi transmi er power:
- 5.15 – 5.25GHz < 23dBm (EIRP), 5.25 – 5.35GHz & 5.470 – 5.725GHz < 23dBm (EIRP),
- 5.725 – 5.825GHz < 14dBm (EIRP)
Note: This power is for EU only
Parameter
Power Supply:19V 15.79A
- More information, please find the electronic manual: xgimi.com/us/support/index
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>