LEDGlow LU-RMT02 Wireless Remote User Manual
- June 13, 2024
- LEDGLOW
Table of Contents
Instruction
Model： LU-RMT02, LU-RM03 （Only different silk-screen)
Specification：
- IC model：HS1527
- Working voltage：9V
- Wordking current：5~5.5mA(±0.5mA)
- Emission frequency：315MHz(±100K)
- Emission power：≥10MW
- Modulation system：ASK
- Transmission distance：20-50meter
- Quiescent current：≤3uA
- Oscillation resistance：270K
This remote control is used in the lamp control above, the customer can choose
the mode at will.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>