FIAMMA 08753-03 Kit Frame Crafter Instruction Manual
- June 13, 2024
- FIAMMA
Table of Contents
Kit Frame
Installation and usage instructions
CARRY-BIKE KIT FRAME CRAFTER
08753-03-
VW CRAFTER ≥ 2017 Please consult the website for instructions in the
languages:
NL-SV-DA-NO-FI-PT
Package contents
|
---|---
Installation instructions
Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use or
limitations of the product, contact the dealer. We recommend that the
installation is carried out by qualified personnel and in compliance with
current local regulations.
Installation only on right rear door
Not suitable for vehicles with 270° hinge system
| 
---|---
| 
| 
Tighten the screws and ensuring that the rear door opens and closes correctly
| 
---|---
Safety instructions
Attention: keep the following labels and affix them to the Carry-Bike rails.
Fiamma declines all responsibility for any personal injury and damage to
property due to incorrect assembly or use of the product; it is suggested to
keep the instructions inside the vehicle. The assembly of the product must be
carried out according to the assembly instructions: the product must not be
modified in any way.
In the event of an accident involving the vehicle and/or the product, ensure
that the product has not been damaged. In the event of damage, contact your
local retailer before moving the vehicle.
Fiamma declines every responsibility for any modification of the product that
may cause damage and/or injury to things and people.
Read the following instructions and warnings carefully; failure to observe
these installation and usage instructions as well as the Highway Code in the
relevant country may cause severe harm or damage for which the manufacturer
declines all responsibility. Keep the original packaging to be used in case of
return.
Before installation, ensure compatibility with the vehicle on which the
product must be installed.
Checking that the wall/rear door is sufficiently solid and suitable for
guaranteeing the resistance of the anchoring points is always mandatory. If
not, fixing and compliance with the maximum load indicated in the instructions
are not guaranteed and it will be necessary to reinforce it.
Always comply with speed limits and the Highway Code. The speed should always
be suitable to traffic conditions and transported load. Check periodically the
ladder to make sure it is firmly attached, especially during the first
kilometers of after long trips.
Warranty
In case of problems please contact your local dealer indicating the data on
the nameplate. Consult our website for spare parts drawing.
Warranty Fiamma
In case of defects with regards to materials and manufacturing, the customer
is entitled to the warranty in accordance with local laws and regulations of
the country in which the product was purchased.
fiamma.com
Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)
All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time, without notice, prices, materials,
specifi cations and models or to cease production of any model.
M0_IS_98690M095_revB
Made in Italy