FIAMMA 07977-01 Side Panel with Crystal Window Instruction Manual
- June 13, 2024
- FIAMMA
Table of Contents
FIAMMA 07977-01 Side Panel with Crystal Window Instruction Manual
Package contents
Standard for: Side W Pro Van
(item No. 07977A01-
Standard for: Side W Caravan store
(item No. 07978-01-)
SIDE W CS SIDE W CS XL
SIDE W PRO CS SIDE W PRO CS XL
SIDE W PRO VAN
| | A| B|
---|---|---|---|---
SIDE W CARAVANSTORE / F35| 07978-01-| 210 cm| 240/260 cm| 3,9 kg
SIDE W CARAVANSTORE XL| 07978A01-| 240 cm| 240/260 cm| 4,2 kg
SIDE W PRO F35 VAN| 07977A01-| 210 cm| 180/220 cm| 4,2 kg
SIDE W PRO CARAVANSTORE / F35| 07977-01-| 210 cm| 240/260 cm| 4,5 kg
SIDE W PRO CARAVANSTORE XL| 07977B01-| 240 cm| 240/260 cm| 4,8 kg
Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. We recommend that the installation is carried out by qualified personnel and in compliance with current local regulations.
Assembly Instructions
In case of problems please contact your local dealer indicating the data on the nameplate. Consult our website for spare parts drawing
Fiamma declines all responsibility for any personal injury and damage to property due to incorrect assembly or use of the product; it is suggested to keep the instructions inside the vehicle.
Keep the original packaging to be used in case of return. The assembly of the product must be carried out according to the assembly instructions: the product must not be modified in any way. All our side panels are made with an high quality standard.
Apart from our strict quality controls, we also have our fabrics continuously controlled by independent institutes to ensure that the fabric is tear resistant, they can hold the weight of water, the coloursdon’t fade and it is resistant against atmospheric agents. To guarantee a perfect quality, the fabrics are waxed or laminated several times.
During this operation, single coloured pigments could move and thus create small bright spots in the material, which are only irregularities that are technically inevitable to avoid, but do not compromise the impermeability of the fabric. Irregularities in weaving (such as knots and thickening) are due to unavoidable manufacturing tolerances and are not grounds for complaint; do not prejudice in any way the qualities of the side panels.
Especially with light fabrics, folds may form that backlight seems dark. They are irregularities of technically unavoidable materials due to the specific workings.
MAINTENANCE INSTRUCTIONS
Store the side panel only if it is dry and possibly clean. The remaining
humidity could cause stains. If you are forced to close it when is still wet,
after max. 12 hours reopen it to make it dry. Most of the dirt is superficial
and can be removed with clean water and a cloth or a brush. If the fabric is
very dirty, add some light cleaning detergent (Marseille soap). Any residual
detergent on the fabric must be carefully rinsed. Be aware never to use any
aggressive chemical substances and never to clean the fabric with a high
pressure machine. Windows in transparent PVC: don’t use detergents which
contain alcohol or solvents. Wash it only with hot water and soft cloth.
Zippers: Subjected to continuous stress and wear. Open and close gently and
slowly without tearing, avoiding excessive effort during fi xing to the
ground. Keep them sliding using a normal zipper spray.
Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)
fiamma.com
All rights reserved.
Fiamma S.p.A. reserves the right to modify at any time, without notice,
prices, materials, specifi cations and models or to cease production of any
model.
