Elna Edge Stitch Foot Sewing Machines Instructions
- October 31, 2023
- Elna
Table of Contents
Edge Stitch Foot Sewing Machines
Product Information
The EDGE STITCH FOOT is designed for use with 9 mm stitch width sewing machines. It is identified by the reference number 202-100-209. This foot has a guide that aligns edges and seams of fabric, allowing for precise and parallel edge stitching and topstitching. When using this foot, you can adjust the guide by turning the screw to match the fabric edge or seam precisely. The foot’s guide is marked in 1 mm units for easy alignment.
It is important to note that when attaching or detaching the foot or a binder, you must press the Lockout key (for models with Lockout key) or turn off the power switch (for models without Lockout key) to ensure safe operation. Please consult your machine’s instruction manual for specific information on accessory attachment and removal.
Product Usage Instructions
- Ensure that your sewing machine is set to a straight stitch pattern. Adjust the needle drop position as necessary.
- Refer to your machine’s instruction manual for information on how to attach and remove presser feet
- Lower the needle at the starting point by turning the hand wheel.
- Lower the foot and use the adjusting screw to align the guide with the fabric edge or seam.
- Sew while guiding the fabric edge along the guide. The aligned guide will help you achieve precise and parallel edge stitching or topstitching.
Attention: If you encounter any issues or need further assistance, please contact Elna International Corp. SA.
EDGE STITCH FOOT
For 9 mm stitch width sewing machines
Ref: 202-100-209
The guide of this foot aligns edges/seams of fabric so that neatly parallel edge stitching and topstitching can be achieved with ease. Adjust the guide by turning the screw to match the edge/seam precisely.
Caution
- Make sure to press the Lockout key when replacing the foot or attaching a binder.
- For models without the Lockout key, turn the power switch off when attaching and detaching the foot and binder.
- Please refer to your machine’s instruction manual for accessory attachment and removal information.
- Machine Settings :
Stitch pattern: Straight stitch (adjust the needle drop position as necessary.)
Please refer to your machine’s instruction manual for presser foot attachment and removal information.
To sew:
Lower the needle at the starting point by turning the hand wheel. Lower the
foot and turn the adjusting screw to align the guide with the fabric edge. Sew
while guiding the fabric edge along the guide. The guide’s scale is marked in
1 mm units.
Elna International Corp. SA / 04.01.2022