FIAMMA 02096-43 LIFT 77 Bicycles Carrier Instruction Manual
- June 13, 2024
- FIAMMA
Table of Contents
FIAMMA 02096-43 LIFT 77 Bicycles Carrier
Product Information
The product is a bicycle carrier designed for installation on vehicles. It allows users to transport bicycles safely and securely while traveling. The carrier is designed to be installed on the vehicle’s wall and is made of durable materials to withstand transportation and usage.
- Product Name: Bicycles Carrier
- Model: CARRY-BIKE
- Weight: 17.0 kg
- Package Contents: Refer to the user manual for a detailed list of package contents
Product Usage Instructions
- Before installing the carrier, carefully inspect all parts to ensure nothing is damaged or deformed during transport.
- If you have any doubts or questions regarding the installation, usage, or limitations of the product, it is recommended to contact the dealer for clarification.
- The installation should be carried out by qualified personnel in compliance with local regulations.
- Prior to installation, check the strongest points on the vehicle’s wall where you can fix the brackets.
- Cut the tubes (B) according to the desired vertical spacing.
- Attach the forks to the tubes, leaving a 2mm space between them and not fully tightening them.
- Before leaving, always hook the two security straps to ensure the bicycles are securely held in place during transportation.
- In case of any problems, contact your local dealer and provide them with the alphanumeric code on the nameplate for assistance.
Please refer to the user manual for more detailed installation instructions, safety warnings, and spare parts information.
Package contents
Dimension
Installation instructions
- Check that nothing has been damaged or deformed during transport.
- In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. We recommend that the installation is carried out by qualifi ed personnel and in compliance with current local regulations.
- Before installing the product, check the strongest points of vehicles’s wall, where you can fi x the brackets.
Instructions for use
- Cut the tubes (B) according to the desired vertical spacing.
Safety instructions
WARNING!
Do not fully tighten the fork to the tube, leave 2mm space. 
- In case of problems please contact your local dealer indicating the data on the nameplate. Consult our website for spare parts drawing.
Accessories
-
Read the following instructions and warnings carefully; failure to observe these installation and usage instructions as well as the laws for driving in the relevant country may cause severe harm or damage for which the manufacturer declines all responsibility.
-
Before installation, ensure compatibility with the vehicle on which the product must be installed.
-
In the event of an accident involving the vehicle and/or the product, ensure that the product has not been damaged. In the event of damage, contact your local retailer before moving the vehicle.
-
Fiamma declines every responsibility for any modifi cation of the product that may cause damage and/or injury to things and people.
-
Checking that the wall/rear door is suffi ciently solid and suitable for guaranteeing the resistance of the anchoring points is always mandatory. If not, strength and compliance with the maximum load indicated in the instructions are not guaranteed and it will be necessary to reinforce these points.
-
After having positioned the Carry-Bike on the rear axle of the vehicle, the normal weight distribution on both axles would be modifi ed. This variation must not exceed the maximum permissible axle load.
-
Never exceed the maximum permitted length and the total weight of the full-load vehicle.
-
Make sure that loading occurs following a correct weight distribution; it must be uniformly distributed (the heaviest bike must be placed near the wall of the vehicle) to ensure better stability.
-
Always give warnings about the presence of the Carry-Bike on your vehicle, using a clearly signal for leaning loads and, in case of limited rear visibiliy, use the additional rear-view mirrors.
-
Take into account the presence of the Carry-Bike, paying attention during driving and expecially during reversing manoeuvres, particularly if you have parking assist system. Always comply with speed limits and the Highway Code. The speed should always be suitable to traffi c conditions and towed load. In case of use of the bike carrier with
tow make sure that the tow hook is always accessible and the corner mobility of the tow is guaranteed (volume measuring din 74058). -
Check periodically the bicycle rack to make sure it is fi rmly attached, especially during the fi rst kilometers of after long trips to avoid damages of the Carry-Bike/vehicle. Make sure the belts are not loose and that the holding brackets have not shifted. Replace worn components immediately.
-
It is advisable to remove the batteries from bicycles, before loading them on the Carry-Bike while traveling.
-
It is recommended to rotate the handlebars of bicycles to avoid damage to the vehicle wall, for which Fiamma declines all responsibility.
Warranty
Warranty Fiamma
In case of defects with regards to materials and manufacturing, the customer
is entitled to the warranty in accordance with local laws and regulations of
the country in which the product was purchased.
- fiamma.com
- Fiamma S.p.A. – Italy
- Via San Rocco, 56
- 21010 Cardano al Campo (VA)
- All rights reserved.
- Fiamma S.p.A.
- reserves the right to modify at any time, without notice, prices, materials, specifi cations and models or to cease production of any model.