anton bauer MATRIX Cheese Plate Owner’s Manual
- June 12, 2024
- ANTON BAUER
Table of Contents
anton bauer MATRIX Cheese Plate
Product Information
The MATRIX Cheese Plate is a versatile accessory designed for mounting various accessories onto camera rigs. It features 15/19mm clamps and a spacer bar for secure attachment to rods. The cheese plate has 1/4-20 and 3/8-16 tapped holes for easy mounting of accessories. It also supports optional mounting options, such as the AJA Ki-Pro Mini Mounting Plate and Gold Mount. The clamp lever feature ensures proper positioning of the lever for convenience.
Specifications
- Model: MATRIX Cheese Plate
- Part Number: A7595-0405 Rev B
- Mounting Options: 15/19mm rods, AJA Ki-Pro Mini Mounting Plate,Gold Mount
- Tapped Holes: 1/4-20 and 3/8-16
Product Usage Instructions
Typical Setup on 15/19mm Rods:
- Loosely fasten the Spacer Bar to the Clamps.
- Slide the Clamps onto the Rails.
- Secure the Clamps in the desired location and clamp them inplace with the lever.
- Tighten the screws in the Spacer Bar using 10-32 x 3/8screws.
- Install MATRIX Cheese Plate to Spacer Bar using 1/4-20 x 1/2 Flat Head Cap Screws.
- OPTIONAL- Install AJA Ki-Pro Mini using 10-32 x 3/8 screws.
- Install proper GOLD MOUNT® Bracket using M3 x 12mm Pan Head Screws. (standard with your Gold Mount). NOTE: MATRIX Cheese Plate has 1/4-20 & 3/8-16 tapped holes for various accessory mounting.
Note: Rails are not supplied with the MATRIX Cheese Plate.
OPTIONAL MOUNTING OPTIONS FOR MATRIX CHEESE PLATE
There are three optional mounting options for the MATRIX Cheese Plate, labeled A, B, and C. Refer to page 2 of the manual for details on different mounting positions.
Mounting ElipZ 10K Battery:
- Refer to the picture provided for the proper mounting of theElipZ 10K battery.
- The most practical mounting position for the lever is straightup.
- Ensure the MATRIX Cheese Plate is mounted securely in thedesired position.
- Use the proper ElipZ power cable to power the camera.
For any further assistance or inquiries, please contact Anton/Bauer, Inc. using the contact information provided below.
CLAMP LEVER FEATURE
For proper positioning of Clamp Lever
- Once lever has been tightened in place, pull out lever and position lever as needed.
- The most practical mounting for the lever is straight up.
The following are trademarks of Anton/Bauer, Inc.:
Anton/Bauer, Anton/Bauer logo and parallelogram design, Aspekt, Automatique,
DataTap, DIONIC, Elipz, Egripz, Elightz, Essentialz, Gold Mount, HubZ, HyTRON,
Impac, Interactive and design, LifeSaver, Logic Series, Logic Series Logo,
Maxx man logo design, Nexus, PowerStrap, Proformer, Probe, ProPac, RealTime,
Satellight, Snap-On, Stasis, Stasis Flex, Tandem, TrimPac, Ultrakit,
Ultralight, “One World. One Smart Choice”, “The power behind the best cameras
capturing the best images in the world.”, “The quality standard of the video
industry”, “The worldwide standard”, and “There should always be choices. It
makes it easier to recognize the best.”
Lexan is a registered trademark of G.E. Company Corp.
Cordura is a registered trademark of E.I. duPont de Nemours
Anton/Bauer, Inc. World Headquarters 14 Progress Drive, Shelton, CT U.S.A. Tel 203-929-1100 or 800-541-1667 Fax 203-929-9935 [email protected]
Anton/Bauer Europe, B.V. Eurode Business Center, Eurode – Park 1-2 6461KB Kerkrade, The Netherlands Tel (+31) 45 5639220 Fax (+31) 45 5639222 [email protected]
Anton/Bauer, Inc. – Signapore Office 6 New Industrial Road, # 02-02 Hoe Huat Ind. Bld., Singapore 536199 Tel (+65) 62975784 Fax (+65) 62825235 [email protected]