KIKUSUI PCR3000WEA2 Mount Kit AC Power Supply User Manual
- June 13, 2024
- KIKUSUI
Table of Contents
Part No. Z1-010-064, I0051401
Sep 2022
Userʼs Manual
OT03-PCR-WEA 3KVA MOUNT KIT
OP02-OT03-PCR-WEA
This product is a mount kit for mounting and fixing the PCR3000WEA2 on the 6 kVA single-phase/three-phase output transformer OT03-PCR-WEA. When you receive the product, check that the parts are properly included and not damaged. If any of the unit and accessories are damaged or missing, contact your Kikusui agent or distributor.
Parts Configuration
Safety Precautions
Ignoring the indications below and handling the product incorrectly may result in slight injury or damage to the product and other property.
CAUTION
- Due to the heavy weight, work with two or more people when lifting the PCR3000WEA2.
- Be careful not to pinch your hands while working.
Installation Procedure
-
Remove the screws holding the feet at the bottom of the PCR3000WEA2, and remove the feet.
-
Attach the plastic plate for mounting with the plastic plate screws.
-
Place the PCR3000WEA2 on top of the OT03-PCR-WEA.
-
Remove the screws on the sides of the PCR3000WEA2 and OT03-PCR-WEA, and attach the mount bracket with the bracket screws.
For the connection procedure, see the OT03-PCR-WEA User’s Manual.
The optional 3 kVA connection cable kit OP01-OT03-PCR-WEA allows the OT03-PCR-
WEA and PCR3000WEA2 to be connected with a cable of appropriate length for
mounting. The OP01-OT03-PCR-WEA also comes with a short bar for the L
terminal that can be used with the OUTPUT terminal block of the OT03-PCR-WEA
for singlephase output.
For information, contact your Kikusui agent or distributor.
KIKUSUI ELECTRONICS CORP.
1-1-3, Higashiyamata, Tsuzuki-ku, Yokohama,
224-0023, Japan
TEL: +81-45-482-6353 Fax: +81-45-482-6261
global.kikusui.co.jp