OVENTION MiLO2-16 Double MiLO Oven User Manual
- June 13, 2024
- OVENTION
Table of Contents
OVENTION MiLO2-16 Double MiLO Oven
IMPORTANT NOTE:
Locate the Specification Label on unit to determine exact Model Name and
electrical specifications. This information is needed to identify the correct
replacement parts. See exploded view illustration(s) for Specification Label
location.
CAUTION: Use of replacement parts other than those supplied by Ovention
may result in damage to unit or injury to personnel and will void all
warranties.
Ovention® Double MiLO® Oven — Model MiLO2-16
Main Assembly Replacement Parts
| Item | Description | Part Number | Qty. |
|---|---|---|---|
| 1 | Cover Panel, Painted † | 04.55.744.xx | 1 |
| 2 | Hex Screw w/Washer, 3/8″ | 05.04.771.00 | 32 |
| 3 | Side Panel, Left, Painted † | 04.55.544.xx | 1 |
| 4 | Baffle Assembly | 04.55.548.00 | 2 |
| 5 | Hinge Shroud, Left | 04.55.324.00 | 2 |
| 6 | Hinge Assembly, Left | R05.12.015.00 | 2 |
| 7 | Screw, Light Housing | 05.04.763.00 | 2 |
| 8 | Housing, Light | 02.30.233.00 | 2 |
| 9 | Light Bulb | 02.30.282.00 | 2 |
| 10 | Micro Switch Assembly | R02.19.271.00 | 4 |
| 11 | IR Cavity Support Assembly | 04.55.599.00 | 8 |
| 12 | Nut, Mounting | 05.04.023.00 | 32 |
| 13 | Switch Mount Assembly | 04.55.457.00 | 4 |
| 14 | Ceramic IR Connector, Male | 04.55.596.00 | 8 |
| 15 | Ceramic IR Connector, Female | 04.55.597.00 | 8 |
| 16 | Hinge Screw, Jet Pack | 05.04.967.00 | 8 |
| 17 | Cook Rack | 04.55.541.00 | 2 |
| 18 | Lower Jet Pack Assembly | ||
| 1Ф, US | R04.55.590.00 | 2 | |
| 3Ф, USCA | R04.55.590.03 | 2 | |
| Item | Description | Part Number | Qty. |
| --- | --- | --- | --- |
| 19 | Crumb Tray | 04.55.594.00 | 4 |
| 20 | Leg, 4″ | 05.30.196.00 | 4 |
| 21 | Foot Pad, Non-Skid | 05.06.198.00 | 4 |
| 22 | Upper Jet Pack Assembly ***** | ||
| 1Ф, US | R04.55.590.01 | 2 | |
| 3Ф, USCA | R04.55.590.04 | 2 | |
| 23 | Side Panel, Right, Painted † | 04.55.543.xx | 1 |
| 24 | Hinge Shroud, Right | 04.55.325.00 | 2 |
| 25 | Hinge Assembly, Right | 05.12.016.00 | 2 |
| 26 | Snap Plug | 02.20.043.00 | 12 |
| 27 | Hex Screw | 05.04.659.00 | 12 |
| 28 | Front Cover, Painted † | 04.55.838.xx | 1 |
| 29 | Grease Tray, Painted † | 04.55.837.xx | 2 |
| 30 | Gasket, Door | 05.06.192.00 | 10′ |
| 31 | Door Assembly Left, Painted † |
(includes item 32)
| R04.55.839.xx| 2
32| Handle Assembly| R05.30.305.00| 2
| Wiring Diagram| 10-01-1365|
Ф = Phase
For units with date code 1849 and older, use Jet Pack Assembly. P/N
R04.55.590.00
Use one of the following suffixes for the appropriate painted part:
“.01” = Black “.47” = Blueberry
“.42” = Candy Apple “.48” = Blue Curacao
“.43” = Lemon “.49” = Seaweed
“.44” = Mac and Cheese “.50” = Lime
“.45” = Sweet Potato “.51” = Graphite
“.46” = Burnt Orange “.52” = Black Licorice
Ovention® Double MiLO® Oven — Model MiLO2-16
Rear and Side Component Replacement Parts
| Item | Description | Part Number | Qty. |
|---|---|---|---|
| 1 | Cooling Fan | 02.12.148.00 | 4 |
| 2 | Air Diverter | 04.55.568.00 | 2 |
| 3 | Hex Screw w/Washer, 1/2″ | 05.04.772.00 | 24 |
| 4 | Air Filter, 10-1/4″ | 04.55.001.00 | 1 |
| 5 | Filter Holder, Large | 0701-3375 | 1 |
| 6 | Finger Guard | 02.12.063.00 | 4 |
| 7 | Hex Screw w/Washer, 3/8″ | 05.04.771.00 | 19 |
| 8 | Cord Grip | 02.20.509.00 | 1 |
| 9 | Power Cord w/Plug | ||
| NEMA 6-50P, 1Ф | 02.18.557.00 | 1 | |
| NEMA 15-50P, 3Ф | 02.18.676.00 | 1 | |
| 10 | Catalyst Pack Assembly | R04.55.563.00 | 2 |
| 11 | Blower Wheel | R02.12.177.00 | 2 |
| 12 | Back Panel Cover | 04.55.542.00 | 1 |
| 13 | Filter Holder, Small | 0802-3079 | 2 |
| 14 | Air Filter, 5″ | 04.55.056.00 | 2 |
| 15 | Blower Motor Kit (includes item 23) | R02.12.161.00 | 2 |
| 16 | Switch Bracket | 04.55.649.00 | 4 |
| 17 | Micro Switch Assembly (includes items 16 and 18) | R02.19.271.00 | 4 |
| 18 | Nut, Switch | 05.04.770.00 | 8 |
| 19 | Timing Pulley | 04.55.026.00 | 2 |
| 20 | Drive Pulley | 04.55.619.00 | 2 |
| 21 | Timing Belt | 04.55.545.00 | 2 |
| 22 | Motor Cover | 04.55.518.00 | 1 |
| 23 | Screw, 3/8″ | 05.04.760.00 | 41 |
| 24 | Rocker Switch | 02.19.161.00 | 2 |
| 25 | Snap Bushing, 1-1/4″ | 02.20.442.00 | 5 |
| 26 | Relay Board | 02.01.535.00 | 2 |
| 27 | Control Board | 02.01.464.00 | 2 |
| Item | Description | Part Number | Qty. |
| --- | --- | --- | --- |
| 28 | Relay, DPST | 02.01.495.00 | 4 |
| 29 | Screw, 1/2″ | 05.04.759.00 | 8 |
| 30 | Screw, 1/4″ | 05.04.763.00 | 4 |
| 31 | Thermocouple | 02.01.377.00 | 2 |
| 32 | High Limit Hold Down Clamp ***** | 0701-3349 | 2 |
| 33 | Power Supply, Switching | 02.17.072.00 | 2 |
| 34 | Hex Screw | 05.04.659.00 | 8 |
| 35 | Nut | 05.04.064.00 | 2 |
| 36 | Snap Bushing, 1/2″ | 02.20.205.00 | 4 |
| 37 | Snap Bushing, 5/8″ | 02.20.213.00 | 5 |
| 38 | Stepper Motor | 02.12.132.00 | 2 |
| 39 | Flat Washer | 05.11.046.00 | 8 |
| 40 | Screw, Socket Cap | 05.04.774.00 | 8 |
| 41 | Screw, Thermal Cutoff | 05.04.773.00 | 4 |
| 42 | Thermal Cutoff | 02.16.204.00 | 2 |
| 43 | RJ45 Connector | 02.20.516.00 | 2 |
| 44 | Mini Circuit Breaker, 32A † | 02.03.090.00 | 2 |
| 45 | T-Block Stop | 02.15.075.00 | 2 |
| 46 | Relay, SPDT | 02.01.466.00 | 4 |
| 47 | Terminal Block, 3 Position, Wago 2004-1301 | 02.15.071.00 | 4 |
| 48 | T-Block Insulator, Wago 2004-1391 | 02.15.072.00 | 1 |
| 49 | T-Block Insulator, Wago 2010-1391 | 02.15.082.00 | 1 |
| 50 | Terminal Block, 3 Position, Wago 2010-1301 | 02.15.081.00 | 6 |
| 51 | Mini Circuit Breaker, 15 A | 02.03.079.00 | 4 |
| 52 | DIN Rail Clip | 02.01.465.00 | 4 |
Ф = Phase
For units with date code 2137 and older, use GFCI Switch Replacement kit P/N
R02.03.090.02, quantity of 1.
NOTE : The last four digits in a ten digit numerical serial number are the manufacturing date code: 9625061704
Ovention® Double MiLO® Oven — Model MiLO2-16
Control Compartment Replacement Parts
| Item | Description | Part Number | Qty. |
|---|---|---|---|
| 1 | Screw, 3/8″ | 05.04.760.00 | 4 |
| 2 | Speaker w/Leads | 02.18.814.00 | 2 |
| 3 | Hex Screw w/Washer, 3/8″ | 05.04.771.00 | 4 |
| 4 | Lock Nut, Controller Assembly | 05.04.770.00 | 20 |
| 5 | Screw, 5 mm | 05.04.1008.00 | 4 |
| 6 | Controller Housing, Painted † | 04.55.836.xx | 1 |
| 7 | Touchscreen Controller Assembly (includes items 4, 5, 8–11, and 16) | ||
| R02.01.514.02 | 2 | ||
| 8 | Battery | 02.20.547.00 | 2 |
| 9 | LCD Bezel | 04.55.665.00 | 2 |
| Item | Description | Part Number | Qty. |
| --- | --- | --- | --- |
| 10 | Gasket, Screen Mount | 05.06.258.00 | 2 |
| 11 | Gasket, LCD Bezel | 05.06.257.00 | 2 |
| 12 | Lock Nut, USB Cover | 05.04.664.00 | 2 |
| 13 | Washer, USB Cover | 05.04.852.00 | 2 |
| 14 | USB Cover | 04.55.674.00 | 2 |
| 15 | Screw, USB Cover | 05.04.214.00 | 2 |
| 16 | Bracket, Controller | 04.55.1212.00 | 2 |
| 17 | USB Cable, 20″ | 02.20.515.00 | 2 |
Use one of the following suffixes for the appropriate painted part:
“.01” = Black “.47” = Blueberry
“.42” = Candy Apple “.48” = Blue Curacao
“.43” = Lemon “.49” = Seaweed
“.44” = Mac and Cheese “.50” = Lime
“.45” = Sweet Potato “.51” = Graphite
“.46” = Burnt Orange “.52” = Black Licorice
Ovention, Inc.
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.855-298-OVEN(6836)
connect@oventionovens.com
parts and service
oventionovens.com
www.oventionovens.com
Documents / Resources
|
OVENTION MiLO2-16 Double MiLO
Oven
[pdf] User Manual
MiLO2-16 Double MiLO Oven, MiLO2-16, Double MiLO Oven, MiLO Oven, Oven
---|---