SCANSTRUT APT-02 Aluminium Power Tower Instruction Manual
- June 13, 2024
- SCANSTRUT
Table of Contents
SCANSTRUT APT-02 Aluminium Power Tower Instruction Manual
Parts List
Tools Required
| Hole Saw ø50-52mm (2”)
---|---
| Power drill
| ø8.5mm (21/64”) Drill Bit
| No. 2 Posidriv Screwdriver Foam Seal
Parts Required
IMPORTANT
Power Towers are only compatible with marine electronics devices as stated in
the latest Scanstrut Product Guide – subject to change without prior notice.
Use of the Power Towers with unapproved products, or overloading, invalidates
any product warranty. Scanstrut does not supply fastenings to fix this product
to the chosen surface. Please choose suitable fastenings for this purpose.
No liability is accepted for damage caused by incorrect installation.
The installation and assembly must be regularly inspected for evidence of
damage or loose parts.
Product has been designed specifically for the mounting of approved marine
electronics under normal boating conditions.
E-mail: sales@scanstrut.com
E-mail: usasales@scanstrut.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>