CHAMPION POWER EQUIPMENT 200990 4500W Wireless Remote Start Inverter Generator User Guide
- June 13, 2024
- CHAMPION POWER EQUIPMENT
Table of Contents
CHAMPION POWER EQUIPMENT 200990 4500W Wireless Remote Start Inverter
Generator
Product Information
- Model: 200990 4500W Wireless Remote Start Inverter Generator
- Manufacturer: Champion Power Equipment, Inc.
- Location: Santa Fe Springs, CA 90670, USA
Parts Included
- Battery connector
- Engine oil (10W-30, up to 16.9 fl. oz. / 500 ml)
Safety Instructions
DANGER: Using a generator indoors can be fatal. Generator exhaust contains carbon monoxide, a poisonous gas that cannot be seen or smelled. Never use the generator inside a home or garage, even if doors and windows are open. Only use the generator outdoors and far away from windows, doors, and vents.
WARNING: Keep all objects at least 5 feet (1.5 m) away from the generator to prevent heat from the muffler and exhaust gas from igniting combustible materials.
Product Usage Instructions
Setup
- Connect the battery
- Push two halves of the battery connector together tightly.
- Add oil
- Recommended oil: 10W-30.
- Add up to 16.9 fl. oz. (500 ml) of oil. Do not overfill.
- Move the generator outdoors
- Only use the generator outside and far away from windows, doors, and vents.
- Add fuel
- Do not use E15 or E85 fuel.
Starting the Generator
Wireless Start
- Push the battery switch to the ON position.
- Turn the EZ Start dial to the ON position.
- Press and release the START button on the remote key fob.
Electric Start
- Push the battery switch to the ON position.
- Turn the EZ Start dial to the ON position.
- Push the choke button.
- Press and hold the ignition switch on the EZ Start Dial.
- Push the choke button.
Manual Start
- Push the battery switch to the ON position.
- Turn the EZ Start dial to the ON position.
- Push the choke button.
- Pull the recoil cord to start the engine.
- Push the choke button.
For more information and support, visit CHAMPIONPOWEREQUIPMENT.COM.
SET UP
-
Shipping Support. ˜ Assembly > Remove Shipping Support Hardware.
-
Connect the battery. ˜ Assembly > Connect the Battery.
Push two halves of battery connector together tightly. -
Add oil. ˜ Assembly > Add Engine Oil.
Recommended: 10W-30, up to 16.9 fl. oz. (500 ml) DO NOT overfill. -
Move the generator outdoors.
ONLY USE OUTSIDE AND FAR AWAY FROM WINDOWS, DOORS, AND VENTS. -
Add fuel. ˜ Assembly > Add Fuel DO NOT use E15 or E85.
-
DO NOT plug in any electrical devices.
NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!
Wireless Start
- Push the battery switch to the “ON” position.
- Turn the EZ Start dial to the “ON” position.
- Press and release the “START” button on the remote key fob.
Electric Start
- Push the battery switch to the “ON” position.
- Turn the EZ Start dial to the “ON” position.
- Push the choke button.
- Press and hold ignition switch on EZ Start Dial.
- Push the choke button.
Manual Start
- Push the battery switch to the “ON” position.
- Turn the EZ Start dial to the “ON” position.
- Push the choke button.
- Pull the recoil cord to start the engine.
- Push the choke button.
Plug in. ˜ Operation > Connecting Electrical Loads.
Visit our YouTube channel to watch our how-to videos and subscribe to view our latest videos on our Champion Power Equipment products!
- 1•877•338•0999
- CHAMPIONPOWEREQUIPMENT.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>