iCT LX7-A Bill Acceptor Installation Guide
- June 13, 2024
- ICT
Table of Contents
iCT LX7-A Bill Acceptor
Use of Materials Limitations
International Currency Technologies Corporation (ICT) all rights reserved.
All materials contained are the copyrighted property of ICT.
All trademarks, service marks, and trade names are proprietary to ICT.
ICT reserves the right at all times to disclose or to modify any information
as ICT deems necessary to satisfy any applicable law, regulation, legal
process or governmental request, or to edit, refuse to post or to remove any
information or materials, in whole or in part, in ICT’s sole discretion.
Introduction
Overview
LX7-A is a bill acceptor feature the water drainage path to offer maximum
protection against water and humidity.
Features
- Four-way bill insertion acceptance.
- Safe lock removable and 200 or 600 bills box capacity.
- Selective lock between plastic knob and tubular lock.
Specifications
General
Acceptance Rate 96% or greater
Note: The acceptance rate excludes notes that are dirty, wet, broken or
wrinkled.
Interface
Pulse
V2.2,
NISR
ccTalk
RS232A0
ICT Protocol
- Transaction Speed Approx. 3 seconds to stack
- Bill Insertion Four-way acceptable
Electrical
- Power Source 12V DC , 117V AC
- Power Consumption
- 12V DC- Standby : 0.3A, 4W
- Operation: 0.8A, 10W
- Maximum: 2.5A, 30W
- 117V AC- Standby : 63mA, 7W
- Operation: 0.12A, 13.5W
- Maximum: 0.27 A, 30W
- Operation Environment
- Operation Temperature: -15°C-60°C
- Storage Temperature: -30°C-?0°C
- Humidity: 30%-85% RH(no condensation)
Mechanical
-
Bill Accepted Width
- 62-72mm
-
Bill Capacity
- Approx. 200
- Approx. 600 bills
-
Lock Type
- Plastic Knob
Tubular lock(Customize)
- Plastic Knob
-
Weight
- Approx. 1.25kg
-
Outline Dimension
- Bezel- Refer to page.5
- Plastic knob- Refer to page.6
- Tubular lock- Refer to page.7
Installation: Indoor use only!!
Packing List
- Main
- Bill Acceptor
- Accessory
- Harness: Refer to 5-1
- LX7-A Installation Guide
- LX7-A DIP Switch Setting Guide
- A Pair of keys (For tubular lock only)
Dimension
-
Double Open-end Standard Bezel
-
Part Number: 3ZMB-FAC37000
-
Double Open-end Metal Bezel
-
Part Number: 3ZMB-FAC66000
Plastic Knob
Tubular lock
Installation
When LX7-A is installed in down stacker direction, please remove the rubber stopper.
Harness Application
1/0 Circuit
Pulse Interface.
ICT Protocol
ccTalk Interface
NISR Interface.
DIP Switch Setting
There are two serial DIP switches which are set on the side of LX7-A(as 5-2
FIG.01). According to different currencies which are used by users, DIP switch
settings could be varied to fit users’ needs. There is also a serial DIP
switch on the base of the unit for inside interface settings (as 5-2 FIG.02).
Please refer to “LX7-A DIP Switch Setting Guide” in the package for more
details.
Software Download and Upgrade
To download and upgrade the software to LX7-A, the programmer (FP-004) is
needed. Please contact ICT to purchase FP-004 and refer to FP-004 user guide
for software download and upgrade information.
Please turn on Bill Acceptor after connecting.
Maintenance
To make sure the bill acceptor always works smoothly, please clean the internal parts every two weeks to every two months.
To clean the internal parts:
-
Press the buttons on the sides of bill path and pull the unit out.
-
Use a soft, dry cloth or towel to clean the bill path and sensors.
Trouble Shooting
Bezel LED Errors
Back LED Errors
If the error can not be solved after corrective actions or it recurs, please contact ICT for technical support.
Taiwan
International Currency Technologies Corporation
No.28, Ln. 15, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei City 114, Taiwan
sales@ictgroup.com.tw (For Sales)
fae@ictgroup.com.tw (For Customer Service)
Website: www.ictgroup.com.tw
©2017 International Currency Technologies Corporation V 8.0 Part Number : H6843G-R
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>