FRInoR TVS64 Hob Sensitive Glass Ceramic Hob With 4 Burners User Guide
- June 13, 2024
- FRInoR
Table of Contents
Hob / User Manual
TVS64
Thank you for choosing this product.
This User Manual contains important safety information and instructions on the
operation and maintenance of your appliance.
Please take the time to read this User Manual before using your appliance and
keep this book for future reference.
Icon
| Type| Meaning
---|---|---
| WARNING|
Serious injury or death risk
|
RISK OF ELECTRIC SHOCK
| Dangerous voltage risk
| FIRE|
Warning; Risk of fire / flammable materials
|
CAUTION
| Injury or property damage risk
| IMPORTANT / NOTE|
Operating the system correctly
1. SAFETY INSTRUCTIONS
- Carefully read all instructions before using your appliance and keep them in a convenient place for reference when necessary.
- This manual has been prepared for more than one model therefore your appliance may not have some of the features described within. For this reason, it is important to pay particular attention to any figures whilst reading the operating manual.
1.1 GENERAL SAFETY WARNINGS
- This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision.
WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Keep children less than 8 years of age away unless they are continually supervised.
WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish such a fire with water, but switch off the appliance and cover the flame with a lid or a fire blanket.
CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously
WARNING: Danger of fire: Do not store items on the cooking surfaces.
WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
- For models which incorporate a hob lid, clean any spillages off the lid before use and allow the cooker to cool before closing the lid.
- Do not operate the appliance by means of an external timer or separate remote-control system.
- Do not use harsh abrasive cleaners or scouring pads to clean oven surfaces. They can scratch the surfaces which may result in shattering of the door glass or damage to surfaces.
- Do not use steam cleaners for cleaning the appliance.
- Your appliance is produced in accordance with all applicable local and international standards and regulations.
- Maintenance and repair work should only be carried out by authorised service technicians. Installation and repair work that is carried out by unauthorised technicians may be dangerous. Do not alter or modify the specifications of the appliance in any way. Inappropriate hob guards can cause accidents.
- Before connecting your appliance, make sure that the local distribution conditions (nature of the gas and gas pressure or electricity voltage and frequency) and the specifications of the appliance are compatible. The specifications for this appliance are stated on the label.
CAUTION: This appliance is designed only for cooking food and is intended for indoor domestic household use only. It should not be used for any other purpose or in any other application, such as for non-domestic use, in a commercial environment or for heating a room.
- All possible measures have been taken to ensure your safety. Since the glass may break, care should be taken when cleaning to avoid scratching. Avoid hitting or knocking the glass with accessories.
- Make sure that the supply cord is not trapped or damaged during installation. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to prevent a hazard.
- Please keep children and animals away from this appliance.
1.2 INSTALLATION WARNINGS
- Do not operate the appliance before it is fully installed.
- The appliance must be installed by an authorised technician. The manufacturer is not responsible for any damage that might be caused by defective placement and installation by unauthorised people.
- When the appliance is unpacked, make sure that it is has not been damaged during transportation. In the case of a defect do not use the appliance and contact a qualified service agent immediately. The materials used for packaging (nylon, staplers, Styrofoam, etc.) may be harmful to children and they should be collected and removed immediately.
- Protect your appliance from the atmosphere. Do not expose it to sun, rain, snow, dust or excessive humidity.
- Materials around the appliance (i.e. cabinets) must be able to withstand a minimum temperature of 100°C.
- The temperature of the bottom surface of the hob may rise during operation, therefore a board must be installed underneath the product.
1.3 DURING USE
- Do not put flammable or combustible materials in or near the appliance while it is operating.
Do not leave the cooker unattended when cooking with solid or liquid oils. They may catch fire under extreme heating conditions. Never pour water on to flames that are caused by oil, instead switch the cooker off and cover the pan with its lid or a fire blanket.
- Always position pans over the centre of the cooking zone, and turn the handles to a safe position so they cannot be knocked or grabbed.
- If the product will not be used for a long period of time, turn the main control switch off.
- Make sure the appliance control knobs are always in the “ 0 ” (stop) position when the appliance is not in use.
1.4 DURING CLEANING AND MAINTENANCE
- Make sure that your appliance is turned off at the mains before carrying out any cleaning or maintenance operations.
- Do not remove the control knobs to clean the control panel.
- To maintain the efficiency and safety of your appliance, we recommend you always use original spare parts and to call our authorised service agents when needed.
CE Declaration of conformity
We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced.
This appliance has been designed to be used only for home cooking. Any other use (such as heating a room) is improper and dangerous.
The operating instructions apply to several models. You may notice differences between these instructions and your model.
Disposal of your old machine
This symbol on the product or on its packaging indicates that this product should not be treated as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the retailer who you purchased this product from.
2. INSTALLATION AND PREPARATION FOR USE
WARNING : This appliance must be installed by an authorised service person or qualified technician, according to the instructions in this guide and in compliance with the current local regulations.
- Incorrect installation may cause harm and damage, for which the manufacturer accepts no responsibility and the warranty will not be valid.
- Prior to installation, ensure that the local distribution conditions (electricity voltage and frequency and/or nature of the gas and gas pressure) and the adjustments of the appliance are compatible. The adjustment conditions for this appliance are stated on the label.
- The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.).
Instructions for the Installer
General instructions
- After removing the packaging material from the appliance and its accessories, ensure that the appliance is not damaged. If you suspect any damage, do not use it and contact an authorised service person or qualified technician immediately.
- Make sure that there are no flammable or combustible materials in the close vicinity, such as curtains, oil, cloth etc. which may catch fire.
- The worktop and furniture surrounding the appliance must be made of materials resistant to temperatures above 100°C.
- If a cooker hood or cupboard is to be installed above the appliance, the safety distance between cooktop and any cupboard/cooker hood should be as shown below.
- Minimum 65 cm (with hood)
- Minimum 70 cm (without hood)
- Minimum 42 cm
- HOB
- The appliance should not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer.
- If the base of the appliance is accessible by hand, a barrier made from a suitable material must be fitted below the base of the appliance, ensuring that there is no access to the base of the appliance.
2.1 INSTALLATION OF THE HOB
The appliance is supplied with an installation kit including adhesive sealing material, fixing brackets and screws.
- Cut the aperture dimensions as indicated in the figure. Locate the aperture on the worktop so that, after the hob is installed, the following requirements are followed.
B (mm)
| 590| min. A (mm)| 50
---|---|---|---
T (mm)| 520| min. C (mm)|
50
H (mm)
| 41-47.5| min. E (mm)| 500
C1 (mm)| 560| min. F (mm)|
10
C2 (mm)
| 490| G (mm)| 20
D (mm)| 50| I (mm)|
25
J (mm)
|
5
| |
- Separator
- Apply the supplied one-sided self-adhesive sealing tape all the way around the lower edge of the cooktop. Do not stretch the tape.
- Worktop mounting bracket
- Self-adhesive sealing tape
- Screw the 4 worktop mounting brackets on to the side walls of the appliance.
- Insert the appliance into the aperture.
2.2 ELECTRICAL CONNECTION AND SAFETY
WARNING: The electrical connection of this appliance should be carried out by an authorised service person or qualified electrician, according to the instructions in this guide and in compliance with the current local regulations.
WARNING: THE APPLIANCE MUST BE EARTHED.
- Before connecting the appliance to the power supply, the voltage rating of the appliance (stamped on the appliance identification plate) must be checked for correspondence to the available mains supply voltage, and the mains electric wiring should be capable of handling the appliance’s power rating (also indicated on the identification plate).
- During installation, please ensure that isolated cables are used. An incorrect connection could damage your appliance. If the mains cable is damaged and needs to be replaced this should be done by a qualified person.
- Do not use adaptors, multiple sockets and/or extension leads.
- The supply cord should be kept away from hot parts of the appliance and must not be bent or compressed. Otherwise the cord may be damaged, causing a short circuit.
- If the appliance is not connected to the mains with a plug, a all-pole disconnector switch (with at least 3 mm contact spacing) must be used in order to meet the safety regulations.
- The fused switch must be easily accessible once the appliance has been installed.
- Ensure all connections are adequately tightened.
- Fix the supply cable in the cable clamp and then close the cover.
- The terminal box connection is placed on the terminal box.
3. PRODUCT FEATURES
Important: Specifications for the product vary and the appearance of your appliance may differ from that shown in the figures below.
List of Components
1. Ceramic Heater
2. Control Panel
4. USE OF PRODUCT
4.1 CONTROL OF HOB
The hob is controlled by the pressing the appropriate electronic button. Each button press is followed by a buzzer sound.
1- Heater display
2- Activate/Deactivate heater
3- Timer display
4- Timer function cooking zone indicators
5- Triple zone indicator
6- Dual zone indicator
7- Dual/triple zone selection
8- Heat setting/timer decrease
9- Activate/Deactive timer
10- Heat setting/timer increase
11- Decimal point
12- Key lock indicator
13- Key lock
14- On/Off
Mode Descriptions
Stand-By-Mode| S-Mode|
Mains supply is applied to the hob control and all heater displays are off or a residual heat display is active.
Operating-Mode
| B-Mode| At least one heater display shows a heat setting between ‘ 0 ‘
and ‘ 9 ‘.
Lock Mode| VR-Mode|
The hob control is locked.
Turn on and Turn off the Appliance
If the appliance is in Stand-By mode, it is put in Operating mode by pressing the On/Off button for at least 1 second. A buzzer sound indicates the successful operation .
On all heaters a “ 0 ” will appear and all decimal points of the heaters will flash (1 sec on, 1 sec off).
If there is no operation within 10 sec, the display of all heaters will turn off.
If the displays are turned off, the heater will be sent into Stand-By mode.
If is pressed for more than 2 seconds (in Operating mode), the appliance is switched off and is sent into S-Mode again. The appliance can be turned off by pressing at any time; even if other buttons are pressed simultaneously.
If there is any residual heat from a heater, this will be indicated in the corresponding Heater Display.
Select Heater
If a single heater is chosen with the corresponding Activate/Deactivate Heater Button the decimal point of the Heater Display flashes. For the selected heater, you can set the heat level between 1-9 by pressing the Heat Setting Buttons or .
The buttons must be pressed within 3 seconds, otherwise the heater selection is erased and heat setting dot will disappear (decimal point). If there is no further operation within 10 seconds, the heater reverts back to S-Mode.
The heat setting can always be changed by pressing or . The available settings are between 1-9.
Each button operation or each display change is accompanied by a buzzer sound.
Turn on Dual and Triple Zones
Turn on the dual zone
The activation of the dual zone is carried out after selecting the desired heater by pressing . This is confirmed by a buzzer sound. At the same time, the corresponding Dual Zone Indicator illuminates. Touching for a second time, toggles the status of the dual zone; it changes from dual zone on to dual zone off and back again.
The extension zone can only be activated after a level between 1-9 is set on the basic zone of the heater.
Turn on triple zone
A dual or triple zone can only be switched on if the basic zone of a heater is set to a level between 19 and the heater is selected (this is indicated be the dot being illuminated).
If is pressed, the signal sounds and the Dual Zone Indicator is illuminated. If is pressed once again, there is another buzzer and the triple heater is switched on. The Triple Zone Indicator will be illuminated and the triple zone will be energized.
Pressing again will switch off the triple zone of the heater. Each operation causes a status change of the dual/triple zones in the following manner (Dual zone on, triple zone on, all extended zones off, dual zone on, triple zone on, dual zone on, etc. …)
Set Cooking Level with and without Heat Boost
All heaters are equipped with heat boost functionality.
If the heat boost is active, the heater will be operated with maximum power for the period of the heat boost time, which is dependent on the selected heat setting. This is indicated through a flashing ‘ A ‘, alternating with the heat setting value (e.g. 0.5 sec “ A ” and 0.5 sec “ 9 “) in the heater display. Once the heat boost time has ended only the heat setting will be indicated.
If the heat boost is to be used for a heater, level 9 must be selected by pressing starting from level 0. After setting the heat to level 9, “ A “, will be displayed alternating with the 9. This means that level 9 and heat boost is now active.
The heat boost can be turned off by pressing until heat setting “ 0 ” appears.
If the heat boost is required, it can be activated by pressing . If the heat setting is set to level 9. In the heat display “ A/9 ” flashes.
Turn Off Individual Heaters
A heater can be turned off in 3 different ways:
- Simultaneous pressing of and buttons
- Reduction of the heat setting to “ 0 ” by pressing the button
- Use of the timer turn off function for the corresponding heater
Simultaneous operation of and buttons
The corresponding heater must be chosen with the Activate/Deactivate Heater Button , the Decimal Point of the related Heater Display flashes. To turn off the heater, and must be pressed simultaneously. A buzzer sounds and “ 0 ” appears in the heat setting display.
If the timer is active for the selected heater, then “ 0 ” will appear in the heater display and also the related timer Cooking Zone Indicator. The Timer Function and the Timer Display is turned off.
If there is any residual heat for the heater, this will be indicated by a “ H ” in the heat setting display.
Reduction of the heat setting to “0” by operating button.
The heater can also be turned off by reducing the heat setting to “ 0 “. When a Heater Display indicates “ 0 “, the associated Decimal Point of the heater will also be turned off.
Turning off an active heater causes not only “ 0 ” to appear in the Heater Display, but also the related timer Cooking Zone Indicator and the Timer Display to turn off.
If there is any residual heat for the heater, this will be indicated by a “ H ” in the heat setting display.
Use of timer turn off function for corresponding heater
After counting down to zero, the timer stops. The corresponding heater shows ‘0’ in the Heater Display and the Timer Display shows “ 00 “. The corresponding timer Cooking Zone Indicator disappears.
An assigned Dual/Triple Zone Selection Indicator also disappears if it is active.
Additionally the buzzer sounds when the timer stops. Touching any button will silence the timer.
Timer Function
The timer provides following features:
The control can run all heater assigned timers and 1 minute minder (which is not assigned to a heater) simultaneously.
All timers can only be used in B-Mode. A heater timer can only be assigned to an active heater, set at a level between 1-9. The minute minder is independent of any heater.
In order to use both functions, the timer function must be activated using the Activate/Deactivate Timer button .
Touching for the fist time after activating the heaters, controls the minute minder (no Cooking Zone Indicator is flashing, they are all on or off).
Touching for a second time, assigns a timer to one of the activated heaters. The Cooking Zone Indicator will be flashing.
Touching again, assigns the next timer in a clockwise direction to the next active heater. And so on…
Minute Minder
No matter whether a heater is activated or not, the minute minder can be operated by pressing , “ 00 ” is displayed and shows that timer is active. The dot in the Timer Display indicates that and can now be used to set the timer value.
The minute minder can be selected when all Cooking Zone Indicators are on or off (no Cooking Zone Indicator is flashing).
With and , the timer value can be set. The minute minder timer begins counting down once it has been set.
The minute minder cannot be stopped by switching off the appliance or activating the key lock function, it will continue to count down.
After reaching the “ 00 “, the timer, buzzer sounds. To stop the buzzer, press any button.
Heater timer
Heater timers can be set only for activated heaters (heater level must be set between 1-9).
The first touch of , activates the minute minder. After touching for a second time, the timer is assigned to the activated heater. This is indicated by the corresponding Cooking Zone Indicator flashing.
Touching again after activating the first heater timer, activates the timer for the next active heater in a clockwise direction. This is indicated by the flashing Cooking Zone Indicator.
Pressing and , will allow you to set the timer value for the heater.
The timer for the heater that was set first is indicated by the illuminated Cooking Zone Indicator.
Touching once again allows further timers to be assigned to other activated heaters.
10 seconds after the last operation, the timer display changes to the timer that will run out next. The assignment of the timer is displayed by a flashing Cooking Zone Indicator. The number of timers that are running is indicated by the number of cooking zone indicators that are illuminated.
By toggling , you can display the timer values for the heater timer and the minute minder. The assignment is always indicated by the flashing Cooking Zone Indicator. If no Cooking Zone Indicator flashes, the minute minder time is shown in the 2-digit Timer Display.
All heater timers can be cleared by switching the appliance into S-Mode using . A minute minder will not be cleared, it will continue to count down,
To clear a timer in Operation Mode, you first have to select the timer by toggling the Activate/Deactivate Timer Button until it is displayed. The value can be cleared in 2 different ways:
- Decrement, by pressing until “ 00 ” appears on the Timer Display.
- Press and simultaneously for 0.5 seconds until “ 00 ” is shown in Timer Display.
Once a timer reaches “ 00 “, the corresponding heat level will be set to “ 0 “. The end of a heater timer or the minute minder is indicated by a buzzer This can be stopped by pressing any button.
Key Lock
The key lock function is used to set ‘save mode’ on the appliance during operation. It will not be possible to make any adjustments by touching the buttons (for example heat settings). It will only be possible to switch the appliance off.
The lock function is active, if the Key Lock button is pressed for at least 2 seconds. This operation is acknowledged by a buzzer. After successful operation, the key lock Indicator flashes and the heater is locked.
The heater can only be locked in Operating Mode (B-Mode).
If the heater is locked, only the button can be used. All other buttons are blocked. If any other button is pressed in the blocked mode, the buzzer sounds and the Key Lock Indicator flashes. Only the switch off by operation by using is possible. However, if you switch off the appliance, you can not restart it again without unlocking.
After pressing for 2 seconds, the Key Lock Indicator disappears. Now, the hob control is unlocked and can be operated in normal order.
Child Lock
Child lock functionality is used to lock the appliance in a complicated multi- Step process. Child lock (and unlocking) is only available in the S-Mode.
First has to be pressed until the buzzer beeps, then and have to be pressed simultaneously for at least 0.5 seconds, but no longer than 1 sec. Following that, the appliance can be locked by touching . All heater displays show “ L ” as confirmation.
If the minute minder is still running, it will proceed until ‘ 00 ‘ is reached and the timer will beep. After confirmation of timer completion, the appliance is fully locked. None of the buttons can be used as long as the appliance is locked.
Child lock can be deactivated in the same way that it is activated. After pressing a beep is heard, and have to be pressed simultaneously for at least 0.5 seconds, followed by pressing only . As confirmation for successful unlocking, “L” will no longer be displayed.
Touch Control Safety Functions
The following safety functions are available to avoid unintended operations
Sensor Safety Cut Off
To prevent the appliance from unwanted button operation, button monitoring
is included. In cases where one or more buttons are pressed for longer than 12
seconds, there is an audible noise to indicate an incorrect operation (pot or
other object placed on the button, sensor failure, etc.) and the appliance
switches off.
The safety turn off causes the hob to go into S-Mode. An “ F ” will flash in all heater displays.
If residual heat is present, it will be displayed in all other heater displays.
The hob control will then go into S-Mode. At the same time a buzzer sounds. After 10 minutes the buzzer will stop.
If there is no erroneous operation present, both the visual and the audible signals will disappear.
Over Temperature Switch Off
Due to the controls being very close to the heater in the middle of the front of the hob, it can occur that an incorrectly placed pot is not sensed by the sensor safety cut off (not covering a button) and heats up the hob to a very high temperature, which makes the glass and the buttons dangerous to touch.
To prevent the hob control unit from damage, the controls constantly monitor the temperature and switches off if overheating occurs.
This is indicated with the letter “ t ” in the heater display until the temperature decreases.
Once the temperature has dropped, the “t” in the heater display will be cleared and the hob control unit reverts back into S-Mode. This means that the user can reactivate the appliance by pressing .
Operating Time Limitations
The hob control unit has a limitation on the operating time. If the heat setting for a heater has not been changed for a certain time, the heater will turn off automatically (for 10 sec a “ 0 ” is displayed. Some residual heat may be present). The limit of the operating time depends on the selected heat setting.
If a timer was associated with the heater, “ 00 ” will be shown on the timer display for 10 sec. After this, the timer display turns off.
After a heater has been automatically turned off, as described above, the heater can be used and the maximum operating time for this heat setting is applied.
Residual Heat Functions
After all cooking processes there is some heat stored in the vitroceramic glass called residual heat. The appliance can calculate roughly how hot the glass is. If the calculated temperature is higher than + 60 °C, then this will be indicated in the corresponding heater display. After the heater or the hob control has been turned off, the residual heat display is shown as long as the calculated heater temperature is > + 60 °C.
The residual heat indicator has the lowest priority and is overwritten by every other display value and during safety switch offs and the displaying of error codes. When voltage is supplied to the hob after a power interruption, the residual heat display indicator flashes. If a heater had a residual heat of greater + 60 °C before the power interruption occurred, the display will flash while the residual heat remains or until the heater is selected for another cooking operation.
Hints and Tips
Important: When ceramic heaters are operated in higher heat settings, the heated areas may be seen switching on and off. This is due to a safety device, which prevents the glass from overheating. Some switching on and off when cooking at high temperatures is quite normal, causes no damage to the hob and little delay in cooking times.
WARNING:
- Never operate the hob without pans on the cooking zone.
- Use only flat saucepans and with a sufficiently thick base.
- Make sure the bottom of the pan is dry before placing it on the hob.
- While the cooking zone is in operation, it is important to ensure that the pan is centred correctly above the zone.
- In order to conserve energy, never use a pan with a different diamater to hotplate being used.
- Circular Saucepan Base
- Small Saucepan Diameter
- Saucepan base that has not settled
- Do not use saucepans with rough bottoms since these can scratch the glass ceramic surface.
- If possible, always place lids on the pans.
- The temperature of accessible parts maybe high when the appliance is operating. Keep children and animals well away from the hob during operation and until it has fully cooled after operation.
- If you notice a crack on the cook top it must be switched off immediately and replaced by authorised service personnel.
5. CLEANING AND MAINTENANCE
5.1 CLEANING
WARNING: Switch off the appliance and allow it to cool before cleaning is to be carried out.
General Instructions
- Check whether the cleaning materials are appropriate and recommended by the manufacturer before use on your appliance.
- Use cream cleaners or liquid cleaners which do not contain particles. Do not use caustic (corrosive) creams, abrasive cleaning powders, rough wire wool or hard tools as they may damage the cooker surfaces.
Do not use cleaners that contain particles, as they may scratch the glass, enamelled and/or painted parts of your appliance.
- Should any liquids overflow, clean them immediately to avoid parts becoming damaged.
Do not use steam cleaners for cleaning any part of the appliance.
Cleaning the Ceramic Glass
Ceramic glass can hold heavy utensils but may be broken if it is hit with a sharp object.
WARNING : Ceramic Cooktops – if the surface is cracked, to avoid the possibility of an electric shock, switch off the appliance and call for service.
- Use a cream or liquid cleaner to clean the vitroceramic glass. Then, rinse and dry them thoroughly with a dry cloth.
Do not use cleaning materials meant for steel as they may damage the glass.
- If substances with a low melting point are used in the cookware’s base or coatings, they can damage the glass-ceramic cooktop. If plastic, tin foil, sugar or sugary foods have fallen on the hot glass-ceramic cooktop, please scrape it off the hot surface as quickly and as safely as possible. If these substances melt, they can damage the glass-ceramic cooktop. When you cook very sugary items like jam, apply a layer of a suitable protective agent beforehand if it is possible.
- Dust on the surface must be cleaned with a wet cloth.
- Any changes in colour to the ceramic glass will not affect the structure or durability of the ceramic and is not due to a change in the material.
Colour changes to the ceramic glass may be for a number of reasons:
1. Spilt food has not been cleaned off the surface.
2. Using incorrect dishes on the hob will erode the surface.
3. Using the wrong cleaning materials.
Cleaning the Stainless Steel Parts (if available)
- Clean the stainless steel parts of your appliance on a regular basis.
- Wipe the stainless steel parts with a soft cloth soaked in only water. Then, dry them thoroughly with a dry cloth.
Do not clean the stainless steel parts while they are still hot from cooking.
**** Do not leave vinegar, coffee, milk, salt, water, lemon or tomato juice on the stainless steel for a long time.
6. TROUBLESHOOTING&TRANSPORT
6.1 TROUBLESHOOTING
If you still have a problem with your appliance after checking these basic troubleshooting steps, please contact an authorised service person or qualified technician.
Problem
| Possible Cause| Solution
---|---|---
Hob control card’s display is blacked out. The hob or cooking zones cannot be
switched on.| There is no power supply.|
Check the household fuse for the appliance.
Check whether there is a power cut by trying other electronic appliances.
The hob switches off while it is in use and an ‘F’ flashes on each display.
| The controls are damp or an object is resting on them.| Dry the controls or
remove the object.
The hob switches off while it is use.| One of the cooking zones has been on
for too long.|
You can use the cooking zone again by switching it back on.
The hob controls are not working and the child lock LED is on.
| The child lock is active.|
Switch off the child lock.
6.2 TRANSPORT
If you need to transport the product, use the original product packaging and carry it using its original case. Follow the transport signs on the packaging. Tape all independent parts to the product to prevent damaging the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance, especially the external surfaces of the product, is protected against external threats.
52202020
Documents / Resources
|
FRInoR TVS64 Hob Sensitive Glass Ceramic Hob With 4
Burners
[pdf] User Guide
TVS64 Hob Sensitive Glass Ceramic Hob With 4 Burners, TVS64, Hob Sensitive
Glass Ceramic Hob With 4 Burners, Sensitive Glass Ceramic Hob With 4 Burners,
Glass Ceramic Hob With 4 Burners, Ceramic Hob With 4 Burners, Hob With 4
Burners, With 4 Burners
---|---