GOAOFOEOI 1080P Wi-Fi Full Metal Case Camera Instruction Manual
- June 15, 2024
- GOAOFOEOI
Table of Contents
GOAOFOEOI 1080P Wi-Fi Full Metal Case Camera
Model Number: WIFI-CAM01
Technical Support Email: pigggy@163.com
Note: If you encounter any problems during installation or use, please feel free to contact us and we will provide you with technical assistance.
Quick Smart connection operation video: https://www.youtube.com/watch?v=FGwLiem77ro
Network settings
- Please download and install App and connect to the camera. Pass the APP for better measures running your first setup. Fasten the antenna onto the camera.
- Make sure that you have a strong/wifi connection at the location of your camera.
- Make sure you know the SSID(WIFI network name)and password of the 2.4G WIFI. WPA/WPA PSK/WPA2 PSK is the network type that the camera supports.
- Make sure make sure your wifi network is visible.
- Keep 5G for your network as at least 1Mbps upload speed for each camera when using the 2Mbps upload speed.
- Download and install the “meShare” app from GooglePlay or the AppStore sign up for a free meShare account. All your devices will be bound to this account.
Zink Connection
- Log in to the app and press the Add Device(-) icon on the upper right corner. Power on the camera with the power adapter.
- Scan the QR code on this page to enter the Zink connection method. Your device(s) will be added to your “meShare” account.
Quick Smart Connection:
- Download the free “meShare” app from Google Playor the App Store using an Android or iOS mobile device. Launch the app and sign up for an account.
- Log in to the app and click the Add Device(+) icon on the upper right corner.
- Find the wifi begin with “ZMD_SAP” and click to connect. (No password is required here.)
- Switch to wifi setup to make sure you can connect the “ZMD_SAP”.
- Finally, click to back to the configuration page after your phone connects to the ZMD SAP.
- Select the wifi you want to connect and enter the password. (Then click “+”. Please make sure wifi is 2.4Ghz and the password is correct.)
Trouble shooting
- To connect your camera successfully, making sure that you are connected to a 2.4G WIFI/WPA/WPA2 PSK wifi network, and you are within a 5GHz network.
- Please make sure that you entered the password accurately.
- Make sure the camera (QR code on the camera) is within a valid proximity range. Do not block the camera’s lens. The distance of your phone is just right.
- Please grasp the display of your phone in front of the camera lens until you hear the camera beeping to make sure that you have entered the correct information to any account.
- Make sure, and try moving your camera and phone close to the router for the initial setup.
- Please turn location service on on your mobile phone before the configure the camera.
- Note: You can check the status light of the device to see whether it connects to the wifi or not. If the status light is blinking red, it’s ready for configuration. If the light is solid blue, it means wifi is connected.
Ensure your camera is connected to the power supply and click “start installation” to configure the device.
Scan the QR Code below with your phone.
Indicator light
- Ready
- 10 secs Connecting
- 20 Sec Connecting
- Finished
Mashare camera provides:
Mashare provides a 30-days Free Trial of Cloud Service encryption recording
on the stored footage by full playback. It’s safer to share storage and more
convenient. No card. No cloud storage compared to along with the video.
Customer Service
Thanks so much for your supports. If there are any questions and
dissatisfaction with the product, please kindly let us know. Satisfaction
guaranteed.
Email: pigggy@163.com
Specifications
| Model Number | WIFI-CAM01 |
|---|---|
| Technical Support Email | pigggy@163.com |
FAQS
What happens if the camera won't connect to my Wi-Fi?
Check your Wi-Fi settings and ensure it's a 2.4GHz network with the correct password. Move the camera closer to the router and make sure there's no signal interference.
How can I ensure the QR code is scanning properly?
Hold your phone's display in front of the camera lens until you hear a beep. Ensure the lens isn't blocked, and the QR code is within a valid proximity range.
Can I use a 5GHz Wi-Fi network with this camera?
No, the camera only supports 2.4GHz Wi-Fi networks.
What should I do if the status light doesn't change?
Check if the camera is powered and connected to the power supply correctly. If the status light does not change after following the setup instructions, contact customer support for assistance.
Can I view the camera feed on multiple devices?
Yes, you can add the camera to a meShare account and access the feed from any device logged into that account.
How do I contact customer support?
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>