MEE audio M6PROBT M6 PRO In Ear Monitors User Manual
- June 13, 2024
- mee audio
Table of Contents
MEE audio M6PROBT M6 PRO In-Ear Monitors
Product Information
The M6PROBT is a universal-fit noise-isolating musician’s in-ear monitor that can be used both wired and wirelessly. It comes with a BTC2 Bluetooth audio adapter for wireless connectivity. The package includes the M6 PRO in-ear monitors, a protective carrying case, BTC2 Bluetooth audio adapter, ComplyTM eartips, silicone eartips (6 pairs), a shirt clip, and a stereo audio cable.
Product Usage Instructions
- Before first use, watch the fit video by visiting MEEaudio.com/PROhelp or scanning the QR code provided.
- Read the user manual in its entirety for the best fit and sound experience.
- To charge the Bluetooth adapter (BTC2), connect the Micro-USB charging cable to any powered USB port and to the charging port of the BTC2. The status indicator light will turn blue when fully charged. Close the USB port cover after charging for maximum sweat resistance.
- To pair the Bluetooth adapter, press and hold the Multifunction button for about 5 seconds until you hear the headset say “Pairing” and the light flashes red and blue.
- Open the Bluetooth menu on the device you wish to pair and select “search for devices,” “add new device,” or “refresh” if needed.
- Select “MEE audio BTC2” from the available devices and allow pairing to complete. Use the pin “0000” if required.
- To wear the M6 PRO with the Bluetooth adapter, identify the right and left earpieces. Place the cable behind your neck and route the earhooks over your ears.
- The basic functionality and controls of the M6 PRO with the Bluetooth adapter include volume control, track skipping, play/pause, call answering and ending, call rejection, and redialing.
IMPORTANT
Please read this quickstart guide in its entirety to ensure best fit and sound
PACKAGE CONTENTS
- M6 PRO In-Ear Monitors
- Protective carrying case
- BTC2 Bluetooth audio
- adapter cable ¼” adapter
- Comply™ memory foam eartips
- Silicone eartips (6 pairs)
- Shirt clip
- Stereo audio cable
CHARGING BLUETOOTH ADAPTER
- Connect the Micro-USB charging cable to any powered USB port and to the charging port of the BTC2.
- The status indicator light will turn blue once the BTC2 is charged and ready for use.
- Close the USB port cover completely after charging for maximum sweat resistance.
PAIRING BLUETOOTH ADAPTER
- Press and hold the Multifunction button for about 5 seconds until you hear the headset say “Pairing” and the light flashes red and blue.
- Open the Bluetooth menu on the device you wish to pair (usually located in Settings > Bluetooth). If needed, select “search for devices”, “add new device”, or “refresh”.
- Select “MEE audio BTC2” and allow pairing to complete. Use “0000” if a pin is required.
Visit the Bluetooth Support Page at MEEaudio.com/Bluetooth for additional Bluetooth pairing and setup information.
WEARING M6 PRO WITH BLUETOOTH ADAPTER
- Identify the right and left earpieces.
- Place the cable behind your neck and route the ear hooks over your ears
BASIC FUNCTIONALITY AND CONTROLS
You may need to bring your music player application up on the screen for media playback to start
Not all devices support this functionality
DYNAMIC AUDIO ENHANCEMENT
The BTC2 features on-the-fly audio adjustment with three audio modes:
- NATURAL : No audio enhancement
- BASS BOOST : Enhances bass response and depth to create more impact and immersion
- VOCAL BOOST : Boosts speech and vocals for more clarity and intelligibility
FACTORY RESET
FACTORY RESET
To perform a full reset, first put the BTC2 in standby mode (headset is powered on but not connected to any devices). Make sure to turn off Bluetooth or delete the “MEE audio BTC2” pairing from any nearby devices that have previously been paired with the BTC2.Once in standby mode, press and hold the Multifunction and volume up buttons simultaneously until you hear the headset say “FactoryReset Complete”. All previously paired devices will be cleared from memory and a new pairing will need to be created before the BTC2 can be used.
REPLACING THE CABLE
- The M6 PRO includes two detachable, interchangeable cables – a BTC2 Bluetooth audio adapter cable and a stereo audio cable.
- Additional cable types, replacement parts, and other accessories are available at www.MEEaudio.com
- To detach the cable, grasp the earpiece and cable connector firmly, and pull straight apart without twisting.
- Attach new cable by lining up the notches on the connectors with the grooves in the earpieces as shown. Push connectors in until they fit securely.
- Make sure to attach the cable connector marked “R” to the right earpiece and the connector marked “L” to the left earpiece.
model : M6PROBT
www.MEEaudio.com/M6PROBT
HOW TO WEAR FIT VIDEO
Before first use, watch our fit video by visiting
MEEaudio.com/PROhelp or scanning the QR code
:
References
- MEE audio | Bluetooth® Support Guide
- MEE audio | Musician's In-Ear Monitors Fit Guide
- MEE audio
- M6 PRO Wired + Wireless In Ear Monitors Bundle | MEE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>