ASUS PN52-BBR556HD Mini PC User Guide
- June 4, 2024
- Asus
Table of Contents
ASUS PN52-BBR556HD Mini PC
INSTALLATION
Installing your Mini PC to a VESA mount-compatible device
NOTE: A 24-inch or larger size monitor on the device is recommended for installation.
To install your Mini PC to a VESA mount-compatible device:
-
Place your Mini PC upside down on a flat and stable surface.
-
Attach the bundled two (2) 12mm screws into the screw holes at the bottom of your Mini PC.
WARNING! Do not overtighten the screws as it may cause damage to your Mini PC. -
Remove the screw hole covers at the back of your VESA mount-compatible device, if any.
-
With the arrow on the VESA mounting plate pointing upward, align its screw holes to the screw holes of the VESA mount-compatible device.
-
Secure the VESA mounting plate to the VESA mount-compatible device using the bundled screws.
WARNING! Do not overtighten the screws as it may cause damage to your VESA mount compatible device. -
Pull the metal lock on the VESA mounting plate outwards.
-
Position the Mini PC and insert the screws attached on the Mini PC to the mounting holes of the VESA mounting plate, then gently push the Mini PC down to secure it in place.
-
Push the metal lock back towards the Mini PC then secure it using a screw.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>