IVIEW ISD100 Smart Video Doorbell Quick Start Guide
- June 13, 2024
- iVIEW
Table of Contents
IVIEW ISD100 Smart Video Doorbell
Functions
- Remote wake-up: The doorbell will be in a sleep mode to save power; you can have a preview in App and have a remote wake-up to monitor after 3-4 Seconds.
- Full-duplex audio: When the visitor push the doorbell button, you will get a call. You can see and hear the vistor in your App from the doorbell if you answer.
- PIR: When the doorbell detects someone stopping by, it sends an alarm message to your cell phone.
- Low battery alarm: You can set a low-battery alarm threshold on your phone App. The threshold is set to a minimum of 10% and a maximum of 50%. When the battery power of the doorbell is lower than the set threshold, the App will have a reminder.
- Battery Lock: After battery box connected ,it will be locked immediately. User have to unlock the battery box in the App setting page to if want to take out the battery box,only 30 seconds allowed.
- Shared device: The doorbell device can be shared with friends, and friends can also preview online. There is no limit to the number of sharing devices, but only 6 accounts are supported for online preview at the same time.
What’s in the box
Consult the checklist below for all components.
Product Parts Description
Description
Parts
Description
Connect
Download
Download the Smart Life App and install it on your smartphone (App download consumes a certain amount of traffic,it is best to use WiFi.)
Support
Set up router
This device requires an 802.11b/g/n 2.4GHz WiFi connection with WPA/WPA2
encryption to set up once it has been setup on your 2.4GHz network.Your phone
can switch to other WiFi networks and still control the device. 
Registration process
- Step 1 Open the Smart Life App, click “Register”, input a legal and valid phone number or email address and click “Next”.
- Step 2 Input Verification Code and create a password which is required a combination of numbers and letters, not less than 6 digits. Then login.
QR Code Configuration
Getting started
- Please follow the instructions and make sure the password is inputed correctly.
- One device can only be added with one App account, if the device has been added with another account already, then it can’t be added to any another account again.
- The device will be unbind from previous account after been deleted from App. Further ,the device will be resetted automattically once from blue light to red light.
Process
-
Step 1 Open the Smart Life App, click “+” or “Add Device”. Then select “All” on the “Select Device Type” page.
-
Step 2 Select “Security Camera”. Power the device on and make sure the indicator is flashing quickly or a prompt tone is heard.
-
Step 3 Input WiFi password and click “Confirm”, scan the QR Code with a device. (You can change the network connection)
-
Step 4 Click “I heard the beep” when the device comes out “dong dong dong”. And you can complete the configuration about 30s.
-
Step 5 The device is added, and the device nickname can also be changed in this interface.
Notice：After the device configured successfully, it will be automatically locked.Motor in the battery box will make a sound.Click “Click to Unlock the Battery”first before unplug the battery.
Unlock
- Step 1 Click “…”, enter the “Setting” page and click “Basic Feature Settings”.
- Step 2 Enter the “Basic Feature Settings” setting page and click “Unlock the Battery” to unlock it automatically. When the motor is finished, the battery box can be pulled out.
Install
Installation of Power supply mode
Warning: Don’t fall down during using
- Step 1: Each input-cable (AC 8~24V) connect to the wires which come out of the wall.
- Step 2 Remove the bottom cover and bracket of the doorbell host and lead the output terminal.Connect to the power interface on the back of the doorbell host.Note: red lead connects the power “+”, white connects the power “-“.
- Step 3 Remove the double-sided adhesive on the back of the mylar sheet.Cover the position of the power interface on the back of the doorbell host.
- Step 4 Use the marker to draw the positions of the 4 screw holes on t he wall surface to be installed.
- Step 5 Screw 4 expansion screws into the newly marked position.
- Step 6 Fix the mounting bracket to the wall.
- Step 7 Install the bottom door of the doorbell main unit and fix it with screws.
- Step 8 Pull the power cable from the center hole of the bracket and slowly insert the doorbell into the door as shown in the above figure (be careful not to catch your finger).
Install the device in battery-powered mode
- Step 1 Remove the doorbell bottom cover and bracket as shown in the figure
- Step 2 Use the marker to draw 4 screw holes on the surface of the wall to be installed
- Step 3 Screw 4 expansion screws into the newly marked position
- Step 4 Fix the mounting bracket to the wall
- Step 5: Snap the doorbell into the bracket
- Step 6: Align the battery box with the bayonet lock, and push the battery box into doorbell.
FAQs
What are the power options for the IVIEW ISD100 Smart Video Doorbell?
The IVIEW ISD100 offers two power options. You can power it by charging or by plugging it into your existing doorbell wiring. This provides 24/7 surveillance of all front door activity.
How does the IVIEW ISD100 Smart Video Doorbell connect with my smartphone?
The IVIEW ISD100 connects with your smartphone using the iView iHome app, which is compatible with both iOS and Android devices. It sends alerts straight to your phone when motion is detected or when the doorbell rings.
What is the video quality of the IVIEW ISD100 Smart Video Doorbell?
The IVIEW ISD100 offers 720p quality video with night vision mode. It connects via Wi-Fi (2.4GHz only) for easy use with your smartphone.
How can I store and playback videos from the IVIEW ISD100 Smart Video Doorbell?
You can store videos either via cloud storage through the iHome app or directly on your device's SD card (SD card not included). You can playback these videos on your smartphone.
Can I check the doorbell feed when I'm away from home?
Yes, by linking your video doorbell to the iView iHome app, you can view the video feed anytime on your phone, even when you are away from home.
Does the IVIEW ISD100 Smart Video Doorbell work with Amazon Echo Show?
Yes, the IVIEW ISD100 supports Amazon Echo Show, allowing you to monitor your home conveniently. You can see who is at your door when someone rings the doorbell.
How does the motion detection feature work?
The IVIEW ISD100 uses infrared technology for motion detection, which works both day and night. When motion is detected, it captures a picture, sends a push notification, and the picture directly to your phone, allowing you to see who's at your door before they press the button.
What is the maximum picture quality of the IVIEW ISD100 Smart Video Doorbell?
The IVIEW ISD100 offers a max picture quality of 1080x720 pixels with night vision, ensuring a clear picture regardless of the time of day.
What are the temperature and weather-resistant features of the IVIEW ISD100?
The IVIEW ISD100 is encased in an IP54 water-resistant exterior, making it suitable for various weather conditions with a working temperature range from -4°F to 130°F.
Does the IVIEW ISD100 Smart Video Doorbell have a built-in rechargeable battery?
Yes, it has a built-in rechargeable battery with an ultra-long standby time. It supports remote wake-up, which activates the battery when it detects activity at your front door, helping to conserve energy.
How can I save videos captured by the IVIEW ISD100 Smart Video Doorbell?
You can save videos captured by the doorbell with a microSD card (not included). It can support up to a 128GB microSD card, allowing you to replay and rewatch video footage.
How does the IVIEW ISD100 enhance home security and prevent intruders?
The IVIEW ISD100 serves as both a doorbell and a security measure. It can deter potential intruders by providing the illusion of constant monitoring. With motion-activated push notifications, you'll be alerted to any suspicious activity around your house.
Video- Product Overview
Download This PDF Link:IVIEW ISD100 Smart Video Doorbell Quick Guide