141011150 Dial Caliper Microtech User Manual
- June 13, 2024
- microtech
Table of Contents
141011150 Dial Caliper Microtech
Product Information
The MICROTECH Dial Caliper is a precision measuring instrument used for accurate measurements. It is designed with ISO 17025:2017 and ISO 9001:2015 calibration standards to ensure reliable and consistent results. The caliper features a shock-proof display and a rotating fixator for easy measurement adjustments. It also includes a thumb roller for smooth operation and precise measurements.
Specifications
| Item No | Range | Resolution | Accuracy |
|---|---|---|---|
| 141011150 | 0-150 mm | 0.01 mm | m |
| 141011300 | 0-300 mm | 0.01 mm | m |
Product Usage Instructions
- Before use, wipe the measuring surface of the frame and gauge calipers with a clean cloth soaked in gasoline to remove anti-corrosion oil. Then, wipe them with a clean dry cloth.
- During measurement, ensure that the measuring jaws are in contact with the measured object without knocking.
- Avoid warping of the measuring surfaces of the instrument during measurement. The measuring surface must be fully in contact with the measurement object.
- WARNING: Avoid scratches on the measuring surfaces. Do not measure the size of an object during machining. Avoid shocks, dropping, and bending of the rod or other surfaces.
SPECIFICATION
Item No| Range| Resolution| Accuracy| Display|
Shock proof| Thumb roller
---|---|---|---|---|---|---
mm| mm| μm
141011150| 0-150|
0,01
| ±30|
Dial
| •| •
141011200| 0-200| ±30| •| •
141011300| 0-300| ±40| •| •
INDICATION
optional accesories
MAIN INFO
- Wipe with a clean cloth, soaked in gasoline, measuring surface of the frame and gauge calipers to remove anti-corrosion oil. Then wipe them with a clean dry cloth.
- During the measurement, measuring jaws should to sum to the measured object without knocking.
- During the measurement avoid warps of measuring surfaces of the instrument. Measuring surface must be fully in contact with the measurement object.
WARNING
IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED:
- Scratches on the measuring surfaces;
- Measuring the size of object in the process of machining;
- Shocks or dropping, avoid bending of rod or other surfaces.
RECOMENDATIONS
MICROTECH INNOVATIVE CALIPERS
E-FORCE COMPUTIERZED CALIPERS
DOUBLE FORCE CALIPERS IP67
PRECISION CALIPERS IP67
Contact
MICROTECH
- innovative measuring instruments
- 61001, Kharkiv, Ukraine, str. Rustaveli, 39
- tel.: +38 (057) 739-03-50
- www.microtech.tools
- sales@microtech.tools
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>