SAMSUNG RF26CG7400SR 36 Inch 25 cu. ft. Counter Depth French 4 Door Refrigerator Owner’s Manual
- June 13, 2024
- Samsung
Table of Contents
25 cu. ft. 4-Door French Door Refrigerator
MODEL RF26CG7400SR DIMENSIONS
Be sure your new fridge will fit
Don’t wait until delivery to be sure your new refrigerator will fit - both in your kitchen and through all doorways. This guide includes all pertinent measurements and clearances so you can buy with confidence.
- WIDTH (FITS 36″ OPENING) 35 3/4″
- DEPTH WITHOUT DOOR 25″
- DEPTH TO DOOR HANDLE 31 3/4 “
- HEIGHT WITHOUT HINGE 68 7/8″
- DEPTH WITHOUT HANDLE 30 1/4″
- HEIGHT WITH HINGE 70″
TOP OF REFRIGERATOR WITH DRAWER OPEN
- DEPTH WITH DOOR OPEN 90° 44″
- DEPTH WITH DRAWER OPEN 45 1/4″
TOP OF REFRIGERATOR WITH DOORS OPEN 125°
Counter-Depth Refrigerator
Counter-depth models sit flush with your kitchen cabinets for a premium, built-in look. They are perfect for galley and island kitchens where space is limited.
- Measure height including flooring. Be sure to allow for hinge clearance height if needed.
- Measure width including countertop overhang.
- Measure depth including molding or trim.
Installation clearances
Allow 3 3/4″ of clearance when installing along a wall. This will allow for
the door to open 90 degrees without the handle contacting the wall.
Allow 2″ minimum clearance at rear for proper air circulation and
water/electrical connections.
Allow a 3/8″ minimum clearance at sides and top for ease of installation.
For optimal usage and ability to open refrigerator doors completely, do not install next to a wall.
Please note: The above dimension and cutout information is for planning purposes only. For complete installation details, consult manual packed with product or download manual online at samsung.com.
Walk the delivery route
Identify the narrowest opening that the appliance will travel through, from
outside the home to the location where it will be installed.
Appliance depth or width must be smaller than the width of the narrowest
opening.