SANUS BSA-OWCM501 W1 On Wall Cable Concealer Cord Cover Kit Instruction Manual
- June 13, 2024
- SANUS
Table of Contents
BSA-OWCM501-W1
INSTRUCTION MANUAL
BSA-OWCM501 W1 On Wall Cable Concealer Cord Cover Kit
EVERYTHING YOU NEED
FOR AN EASY INSTALLATION
(4) 30″ channel – A
(3) Couplings – B
(1) T-fitting – C
(2) Flat elbows – D
(1) Inside elbow – E
(1) Outside elbow – F
(1) Installation instructions
Warning:
- Not to be used to extend hard-wired (permanent) electrical wiring
- Two power cord maximum
- Do not loop cord
EASY INSTALLATION
STEP 1
Cut channel to desired length. STEP 2
Insert cords and press firmly against wall.* STEP 3
Insert cords and snap shut.
*Wall surface must be clean. Do not use on textured surfaces.
WE’RE HERE TO HELP
Our US-based install experts are standing by to help.
Call us at:
+1 800-359-5520
Legrand AV Inc.
6436 City West Parkway
Eden Prairie, MN 55344 USA
**** +1 800-359-5520
SANUS.com/chatSP
SANUS.com
Legrand AV Inc. and its affiliated corporations and subsidiaries
(collectively, “Legrand”), intend to make this manual accurate and complete.
However, Legrand makes no claim that the information contained herein covers
all details, conditions, or variations. Nor does it provide for every possible
contingency in connection with the installation or use of this product. The
information contained in this document is subject to change without notice or
obligation of any kind. Legrand makes no representation of warranty, expressed
or implied, regarding the information contained herein. Legrand assumes no
responsibility for accuracy, completeness or sufficiency of the information
contained in this document.
©2023 Legrand AV Inc. All rights reserved. Sanus is a brand of Legrand. SANUS
and the SANUS logo are registered trademarks of Legrand.
05/2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>