VALORE AC189 Dual Mode Wireless Mouse User Manual

VALORE AC189 Dual Mode Wireless Mouse

Product Information

• Dimension (L x W x H): 98 x 60 x 39mm
• Material: ABS
• Weight: 66.5g
• Working mode: 2.4G+BT5.1
• Working current: 30mA
• Battery capacity: 300mAh
• Working range: 10m
• Four gears of DPI: 800/1200/1600
• DPI light mode: Red(800), Green(1200), Blue(1600)
• Light mode: Colorful breathing light effect

Product Usage Instructions

USB Connection:

1. Plug the receiver into the USB port of your computer.
2. Push the power switch at the bottom of the mouse to the position of NO and push the dual-mode switch to 2.4GHz mode. The mouse tail light should be green and flashing.
3. Move the mouse or press the left and right keys to use it normally.

BT Connection:

1. Push the power switch at the bottom of the mouse to the position of NO and push the dual-mode switch to the BT mode. The mouse tail light should turn blue and flash, indicating it is in code matching mode.
2. Open the tablet/PC/phone, go to the Settings menu, click on the BT screen, and connect the paired mouse (BT5.1Mouse).
3. Move the mouse or press the left and right keys to use it normally.

Charging:
It is recommended to charge the mouse using the USB interface of your computer. During charging, the red light on the scroll wheel will turn off once the mouse is fully charged. It typically takes approximately 1 to 2 hours to fully charge the mouse.

Troubleshooting Tips:

• If the mouse cursor moves slowly, check the battery level and charge the mouse promptly when the battery is low.
• If the mouse cannot establish a connection, ensure that the power switch at the bottom of the mouse is turned on. Also, try selecting the correct connection mode or moving the USB receiver to a different USB port.
• To conserve power, manually turn off the power switch if you do not intend to use the mouse for an extended period of time.
• When not in use, the mouse will automatically enter sleep mode. Simply move the mouse or press any key to wake it up.
  Please refrain from removing or attempting to repair the product on your own, as doing so may result in damage.

Battery Warning:
Dispose of the battery according to specific regulations and discard it in an electronics waste bin. Keep batteries away from children.

Class 1 Laser Product:
Do not disassemble or attempt to repair the product on your own. Failure to comply with the specified guidelines may result in hazardous radiation exposure.

Thank you for purchasing the Valore Dual Mode Wireless Mouse (AC189).
Important: Please read the user manual thoroughly before using the product.

Features

• Quick desktop switch & privacy protection
• Colorful rainbow breathing light display
• Flexible dual-mode wireless connectivity options

Specifications

• Battery capacity: 400mAh
• System support: Windows XP and above/Android/MacOS
• Transmission distance: Up to 10m
• Resolution: 800/1200/1600DPI
• Material: ABS
• Dimensions (L × W × H): 98 × 60 × 39mm
• Weight: 66.5g

Package Contents

• Dual-mode wireless mouse x1
• USB dongle x1
• USB-C charging cable x 1

PRODUCT FUNCTION DIAGRAM

PRODUCT INSTRUCTION

USB Connection

• Step 1: Plug the receiver into the USB port of your computer.
• Step 2: Push the power switch at the bottom of the mouse to the position of “NO”, and push the dual-mode switch to 2.4GHz mode, the mouse tail light is green and flashing.
• Step 3: Move the mouse or press the left and right keys to normal use.

BT Connection

• Step 1: Push the power switch at the bottom of the mouse to the position of “NO”, -and push the dual-mode switch to the BT mode, when the mouse tail light turns blue and flashes, start to enter the code matching mode.
• Step 2: Open the tablet/PC/phone, click the “BT” screen in the Settings menu, and connect the paired mouse.(BT5.1Mouse)
• Step 3: Move the mouse or press the left and right keys to normal use.

PRODUCT PARAMETERS

CHARGING MODE

• It is recommended to charge the mouse using the USB interface of your computer. During charging, the red light on the scroll wheel will turn off once the mouse is fully charged. It typically takes approximately 1 to 2 hours to fully charge the mouse.
• Here are some guidelines for troubleshooting common issues:
  • If the mouse cursor moves slowly, check the battery level. It is advised to charge the mouse promptly when the battery is low.
  • If the mouse cannot establish a connection, ensure that the power switch at the bottom of the mouse is turned on. Also, try selecting the correct connection mode or moving the USB receiver to a different USB port.
  • To conserve power, manually turn off the power switch if you do not intend to use the mouse for an extended period of time.
  • When not in use, the mouse will automatically enter sleep mode. Simply move the mouse or press any key to wake it up.
  • Please refrain from removing or attempting to repair the product on your own, as doing so may result in damage.

EASY- MANUAL

LED INSTRUCTION

BATTERY WARNING：

• Improperly replaced batteries may pose a risk of leakage, explosion, and personal injury.
• Mistreated rechargeable batteries may also present a risk of fire or chemical burn.
• Do not disassemble the product or expose it to conducting materials, moisture, liquid, or temperatures above 54°C (130°F).
• Do not use or charge the battery if it appears to be leaking, discolored, deformed, or exhibiting any abnormal characteristics.
• Avoid leaving the battery discharged or unused for extended periods. Do not short circuit the battery.
• The device may contain an internal, non-replaceable rechargeable battery. Battery life may vary depending on usage.
• Dispose of non-operational batteries according to local laws or regulations. If there are specific regulations, discard the battery in an electronics waste bin. Keep batteries away from children.

CLASS 1 LASER PRODUCT:

• This optical device complies with international standards and emits one or two independent parallel beams of infrared user-invisible light.
• Maximum power is 716 microwatts CW with an emitted wavelength of 832-865 nm.
• Operating temperature should be between 5°C and 40°C.
• Use caution when using controls, making adjustments, or performing procedures beyond those specified, as it may result in hazardous radiation exposure.
• This optical device complies with international standards and emits a diverging beam of minimum +/-2° of infrared user-invisible light.
• Maximum power is 1.4 milliwatts CW with an emitted wavelength of 832-865 nm.
• Operating temperature should be between 5°C and 40°C.
• Use caution when using controls, making adjustments, or performing procedures beyond those specified, as it may result in hazardous radiation exposure.

POWER SUPPLY WARNING:

• The power supply is intended for indoor use only. Use only the provided power supply and do not attempt to repair or use a damaged one.
• Avoid immersing the power supply in water or subjecting it to physical abuse. Regularly inspect the power supply for any cable, plug, or casing damage.

GENERAL PRODUCT WARNING
Read the manual before using the product:

• Do not open or modify the product except for battery removal and replacement.
• Avoid directing the infrared/laser beam at anyone’s eye or reflective objects.
• Keep the product away from liquids, heat, or moisture.
• Power off the device if it is exposed to temperature environments outside the specified operating range until it stabilizes.
• Use only the provided power supply and do not charge the product during an electrical storm.
• This product is not intended for children under 14 years old.
• If the product is operating improperly, contact customer support and return it to the manufacturer for service or repair.
• Prolonged repetitive motion with the product may result in injury. Seek medical attention for any pain, numbness, weakness, swelling, burning, cramping, or stiffness.
• Any changes or modifications to the product not approved by the manufacturer may void the user’s authority to operate the equipment.

TECHNICAL SUPPORT & WARRANTY

• For Technical Support, email us at v.info@valore.sg.
• For Warranty Registration, visit www.valore.sg.

Cautions:
Read all the instructions and warnings carefully prior to using this product.

• Do not store the product in a high temperature environment.
• Do not place the product near fire or other excessively hot environments.
• Do not expose the product to moisture or submerge it in liquid. Keep the product dry at all times.
• Do not disassemble the product or attempt to repair or modify it in any manner.
• Do not expose the product to strong impacts or use on rough surfaces. If there is any serious damage to the product such as dents, cracks or abrasion, stop using the product and contact us immediately via email at v.info@valore.sg, or return this product to the store where you have purchased it from.
• If the product produces any abnormal smell, heats up abnormally during use or experiences unusual changes in form or colour, stop using the product and contact us immediately via email at v.info@valore.sg.

DISCLAIMER & TRADEMARKS

• All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and communications statutes.
• The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered trademarks and service marks of Valore and others. All other registered and unregistered company names, product names and marks mentioned herein the (“Materials”) are the property of their respective owners and may be trademarks or registered trademarks.

References

• Valore | Mobility and Lifestyle Goods

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>