Haylou-GT1 TWS BT Earphone User Manual
- June 7, 2024
- Haylou
Table of Contents
- Overview
- What’s in the Box
- Earphones
- Power-on
- Power-off
- Ignore Call
- Stereo Mode
- Play/pause
- Voice Assistant
- Answer/End Call
- Skip Track Forward/backward
- Three-way Calling & Switch
- Switch Audio Output
- Factory Setting
- Basic Parameters
- Caveats
- Warranty Card
- Tips
- Hazardous substances and their contents in the item
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Haylou-GT1 TWS BT Earphone User Manual
Overview
Charging Case
What’s in the Box
BT earphones, charging case, EarTips X 2 pairs, user manual, charging cable
Earphones
Medium EarTips have been assembled in advance. However, you may try large or small ones, if the medium ones do not fit you well.
When calling, adjust Mic towards mouth to gain clear calling
Power-on
Take out earphones from the case to power on them. Or touch both panels for l.Ss to power on earphones ( LED glows solid white) when they are not in the case.
Power-off
Put earphones into the case to power off them. Or touch both panels for4.5s to power off earphones ( LED glows solid red for2s ).
Ignore Call
Touch the panel for ls to ignore incoming call.
Stereo Mode
Auto pairing: take out both EarBuds from the case and they will auto pair with
each other in 2 or 3s. Earphones will be connectable to cellphone when LED on
right EarBud blinks white slowly. On cellphone, search for “Haylou-GTl_R” and
tap to connect. If earphones fail to be connected to cellphone, please put
EarBuds back to the case and repeat the above steps. Earphones will auto
reconnect to the last device in connectivity records, if any.
Note: earphones have been setted to factory when shipping out.
Manual pairing: manually power on two EarBuds and they will auto pair with each other when LED blinks white promptly. Then LED on the right EarBud will blink white slowly and now you can tap iton cellphone to connect.
Play/pause
When standby, touch the panel to pause/play music.
Note : media player should run in background.
Voice Assistant
When standby, triple touch the panel to activate voice assistant.
Note : device needs to support voice assistant and fast awakening be
turned on.
Answer/End Call
Double touch the panel to answer incoming call and double touch the panel again to end it.
Skip Track Forward/backward
Touch the panel on right earbud twice to skip track forward
Touch the panel on left earbud twice to skip track backward
Three-way Calling & Switch
Touch the panel twice to answer incoming call from phone. if another call is coming in sync, touch the panel to put the first call on hold while activating the second one. Double touch the panel to switch between active call and held call.
Switch Audio Output
When calling, touch the panel for ls to switch audio output between earphones and cellphone.
Factory Setting
If earphones do not function well, please refer the following steps to reset factory: take EarBuds out from the case. Power off the earphones then touch both panels for about 15s ( LED will blink red and white three times twice). After that, put them back to the case. Delete connectivity record on cellphone before processing another pairing All connectivity records relating to the EarBuds will all be removed)
Basic Parameters
Caveats
- Never disassemble or modify your headset for any reasons to avoid any damages and danger.
- Do not store the headset in extreme temperature (under 0’C or over 45’C).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electrics hock.
- Do not use harsh chemicals or strong detergents to clean the headset.
- Keep the headset dry.
Warranty Card
Warranty Period
12 months after the next day receiving this item.
Free exchange service will not be accessed under following circumstances:
- Damages caused unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping off.
- Damages by act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.
Tips
- Before using the headset, please read the manual carefully and keep it for future references.
- The headset need to be fully charged prior to first-time use.
- If the headset is left unused for over two weeks, please recharge it periodically.
- Please use the chargers made by qualified manufacturer.
- If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it.
Address : Suite 1303, 1305 and 1306, 13/F, Project Phrase 2 of Gaosheng Tech Tower, Gaosheng Tech Park, No.5 Longxi Road, Zhouxi Community, Nancheng District, Dongguan City, Guangdong, China.
Manufacturer : Dongguan Liesheng Electronic Co., Ltd.
Web : www.haylou.com
Perform standard : Q/LS 1-2018
Made In China
Hazardous substances and their contents in the item
Notes : Please arrange using time properly as your hearing may be damaged by using the device for a longtime.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>