PIVOT RSFK Insulated Room Sealed Flue Kit Instruction Manual
- June 13, 2024
- PIVOT
Table of Contents
PIVOT RSFK Insulated Room Sealed Flue Kit
Product Information
The Insulated Room Sealed Flue Kit is a fully sealed 4m flue kit designed for use with the RSF (Room Sealed Flue) heater. It is made from stainless steel and features a painted insulated RSF from the heater. The kit also includes an optional support brace for added stability.
Product Specifications
- Flue Length: 4m
- Paint Finish: Stove Bright Metallic Black
- Tested and approved to AS/NZS2819: 2008 standards
Product Usage Instructions
Before installing the Insulated Room Sealed Flue Kit, please read and follow these instructions carefully:
- Ensure that the RSF heater is properly installed and positioned according to the manufacturer’s instructions.
- Identify the components of the flue kit. The kit includes the following items:
- 2x 1000mm RSF, painted black (with Locking Band)
- 1x 1000mm starter length, end painted for drop box
- 1x 1000mm Room Sealed Flue (with Locking Band)
- 1x Ceiling Ring
- 1x Wind Cowl
- 1x Room Sealed Flue Adapter
- Start by attaching the 1000mm RSF, painted black, to the RSF heater using the provided Locking Band. Ensure a secure connection.
- Connect the 1000mm starter length, with the end painted for the drop box, to the previously attached RSF.
- Attach the 1000mm Room Sealed Flue to the starter length using the Locking Band. Make sure it is firmly connected.
Insulated Room Sealed Flue Kit
Fully Sealed 4m Flue Kit
Painted Insulated RSF from the heater Stainless Steel RSF outside the home.
Optional Support Brace
NOTE
- The optional support brace (N) has the ability to adjust to any angle of adjacent roof beams.
- There is a 25mm clearance between the flue and any timber at all times.
Fully Sealed Flue Kit
| Item| QTY
---|---|---
O| 1000mm RSF, painted black (with Locking Band)| 2
B| 1000mm starter length, end painted for drop box| 1
C| 1000mm Room Sealed Flue (with Locking Band)| 1
E| Ceiling Ring| 1
F| Wind Cowl Stainless Steel| 1
G| Room Sealed Flue Adapter| 1
© Pivot Stove & Heating pivotstove.com.au
Flue Assembly
NOTE To assemble flue, first lock into place, second secure locking band around joint
Ceiling Ring
- There is a 25mm clearance between the flue and any timber at all times.
Paint Finish : Stove Bright Metallic Black
Tested and approved to AS/NZS2819:2008
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>